feed/routing.git
5 months agobabeld: Improve Makefile formatting
Adrian Schmutzler [Wed, 21 Aug 2019 13:56:50 +0000 (15:56 +0200)]
babeld: Improve Makefile formatting

This applies some style improvements to make this ready for
migration to openwrt/packages.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 months agobabeld: Update to version 1.8.5
Adrian Schmutzler [Wed, 21 Aug 2019 13:45:50 +0000 (15:45 +0200)]
babeld: Update to version 1.8.5

Changes:

  * Fixed a bug that caused confustion between learned routes and
    imported routes (thanks to Fabian Bläse).
  * Fixed a bug that prevented install filters from being evaluated
    (thanks to Killian Lufau).

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 months agobabeld: Don't kill -9 on stop
Baptiste Jonglez [Mon, 26 Aug 2019 16:39:37 +0000 (18:39 +0200)]
babeld: Don't kill -9 on stop

Killing anything with -9 is a bad idea.  When killed this way, babeld
won't be able to properly disassociate from its neighbours, withdraw its
announced routes or remove routes from the kernel.

This got introduced in bab933d4cad8 ("babeld: Update to version 1.8.3 +
fix init") with an unrelated change.  The purpose of the change is unclear
because stopping and restarting babeld worked fine without this change.

Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
5 months agoMerge pull request #501 from tohojo/bird-205
Jo-Philipp Wich [Mon, 19 Aug 2019 13:57:50 +0000 (15:57 +0200)]
Merge pull request #501 from tohojo/bird-205

Bird: Bump package versions to 1.6.7 and 2.0.5

5 months agobird1: Bump to v1.6.7 501/head
Toke Høiland-Jørgensen [Mon, 19 Aug 2019 10:34:49 +0000 (12:34 +0200)]
bird1: Bump to v1.6.7

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
5 months agobird2: Bump to v2.0.5
Toke Høiland-Jørgensen [Mon, 19 Aug 2019 10:34:05 +0000 (12:34 +0200)]
bird2: Bump to v2.0.5

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
5 months agonodogsplash: Release 4.0.2 (#500)
Rob White [Thu, 15 Aug 2019 23:45:52 +0000 (00:45 +0100)]
nodogsplash: Release 4.0.2 (#500)

Maintainer: Moritz Warning <moritzwarning@web.de>

Compiled and tested on snapshot SDK mips_24kc

This release has numerous bug fixes and enhancements:

  * Fix bug - fas_remotefqdn not supported with option fas_secure_enabled 0 [bluewavenet]
  * Fix bug - prevent deadlock causing ndsctl to hang and NDS to become unresponsive [bluewavenet]
  * PreAuth - Override FAS settings making configuration foolproof [bluewavenet]
  * ndsctl - make json parsing consistent for all client variables [bluewavenet]
  * Fix memory leak in template generation [lynxis]
  * When executing the ndsctl stop command, cleanup all structures [lynxis]
  * Check for positive errno in thread_ndsctl [lynxis]

Signed-off-by: Rob White <rob@blue-wave.net>
5 months agoMerge pull request #490 from RussellSenior/fix-olsrd
Saverio Proto [Tue, 13 Aug 2019 06:46:20 +0000 (08:46 +0200)]
Merge pull request #490 from RussellSenior/fix-olsrd

olsrd: fix build against gpsd-3.19

5 months agoolsrd: update to 0.9.8 490/head
Russell Senior [Sun, 11 Aug 2019 08:33:49 +0000 (01:33 -0700)]
olsrd: update to 0.9.8

Allows building against gpsd-3.19.

Signed-off-by: Russell Senior <russell@personaltelco.net>
5 months agoMerge pull request #497 from ecsv/alfred-multiif
Simon Wunderlich [Fri, 2 Aug 2019 07:53:22 +0000 (09:53 +0200)]
Merge pull request #497 from ecsv/alfred-multiif

alfred: Interface init script fixes

5 months agoMerge pull request #495 from ecsv/batadv-2019.3
Simon Wunderlich [Fri, 2 Aug 2019 07:53:03 +0000 (09:53 +0200)]
Merge pull request #495 from ecsv/batadv-2019.3

batman-adv 2019.3

5 months agoalfred: Allow startup without batman-adv sysfs support 497/head
Sven Eckelmann [Thu, 1 Aug 2019 19:22:21 +0000 (21:22 +0200)]
alfred: Allow startup without batman-adv sysfs support

The batman-adv kernel module can be build without sysfs support. This will
stop the kernel module from creating the "mesh" directory. The alfred init
script must not depend on this folder to start the daemon up.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
5 months agoalfred: Support multiple listening interfaces
Sven Eckelmann [Thu, 1 Aug 2019 18:58:41 +0000 (20:58 +0200)]
alfred: Support multiple listening interfaces

The alfred daemon allows to be started with multiple interfaces. The first
interface is used for communication and to calculate the source mac
address. The rest of the interfaces are only used for communication.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
5 months agobatman-adv: upgrade package to latest release 2019.3 495/head
Sven Eckelmann [Thu, 1 Aug 2019 15:53:51 +0000 (17:53 +0200)]
batman-adv: upgrade package to latest release 2019.3

* support latest kernels (3.16 - 5.3)
* coding style cleanups and refactoring
* add routable multicast optimizations
* bugs squashed:

  - fix duplicated OGMs on NETDEV_UP
  - fix dumping of multicast flags

Signed-off-by: Sven Eckelmann <sven@narfation.org>
5 months agobatman-adv: Switch proto scripts to new prefixes
Sven Eckelmann [Thu, 1 Aug 2019 14:22:00 +0000 (16:22 +0200)]
batman-adv: Switch proto scripts to new prefixes

The '-m' option to select the mesh interface or vlan interfaces was
replaced with device type specific subcommand prefixes:

* meshif <netdev>
* vlan <vdev>
* meshif <netdev> vid <vid>
* hardif <netdev>

This change should also be made in the proto script to allow batctl to drop
the support of '-m' completely in the future.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
5 months agobatctl: upgrade package to latest release 2019.3
Sven Eckelmann [Thu, 1 Aug 2019 15:44:55 +0000 (17:44 +0200)]
batctl: upgrade package to latest release 2019.3

* add tcpdump support for MCAST TVLV, unicast fragments and coded packets
* implement support for multicast RTR flags
* avoid some kernel deprecation warning by using more generic netlink over
  sysfs
* use type specific prefixes to select mesh interface or vlan instead of '-m'
* add support for hardif specific settings

Signed-off-by: Sven Eckelmann <sven@narfation.org>
5 months agoalfred: upgrade package to latest release 2019.3
Sven Eckelmann [Thu, 1 Aug 2019 15:37:03 +0000 (17:37 +0200)]
alfred: upgrade package to latest release 2019.3

* avoid some kernel deprecation warning by using more generic netlink over
  sysfs

Signed-off-by: Sven Eckelmann <sven@narfation.org>
5 months agobatman-adv: Drop compat-hacks for unsupported kernel versions
Sven Eckelmann [Thu, 1 Aug 2019 14:39:32 +0000 (16:39 +0200)]
batman-adv: Drop compat-hacks for unsupported kernel versions

OpenWrt only supports kernel 4.9, 4.14 and 4.19. Older kernel versions than
4.9 therefore don't require support.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
5 months agonodogsplash: Release 4.0.1 (#492)
Rob White [Tue, 30 Jul 2019 15:22:39 +0000 (16:22 +0100)]
nodogsplash: Release 4.0.1 (#492)

Maintainer: Moritz Warning <moritzwarning@web.de>

Compiled and tested on snapshot SDK mips_24kc

  * Make debuglevel platform independent [mwarning]
  * Add/move/reword some debug output lines [mwarning]
  * Numerous code cleanups [mwarning]
  * Put fas code into block [mwarning]
  * Fix coding error in fas-aes.php incorrectly passing redir back to NDS [bluewavenet]
  * Numerous documentation updates [bluewavenet]

Signed-off-by: Rob White <rob@blue-wave.net>
5 months agoMerge pull request #476 from blogic/master
Jo-Philipp Wich [Tue, 30 Jul 2019 10:10:34 +0000 (12:10 +0200)]
Merge pull request #476 from blogic/master

mcproxy: some add some fixes

5 months agocjdns-tests: Don't build on ARC (#487)
Rosen Penev [Mon, 29 Jul 2019 17:38:51 +0000 (10:38 -0700)]
cjdns-tests: Don't build on ARC (#487)

Not supported.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
5 months agoMerge pull request #489 from ecsv/batmand-procd
elektra42 [Mon, 29 Jul 2019 09:35:35 +0000 (11:35 +0200)]
Merge pull request #489 from ecsv/batmand-procd

batmand/vis: Convert to procd based init scripts

6 months agoMerge pull request #488 from ecsv/bat-cleanup
Simon Wunderlich [Sun, 28 Jul 2019 10:41:31 +0000 (12:41 +0200)]
Merge pull request #488 from ecsv/bat-cleanup

Cleanup of B.A.T.M.A.N. related packages build rules

6 months agovis: Convert to procd based init script 489/head
Sven Eckelmann [Sat, 27 Jul 2019 21:33:35 +0000 (23:33 +0200)]
vis: Convert to procd based init script

The legacy init script had various problems in comparison with procd based
init scripts. It wasn't able to correctly track the running process
instance and thus could:

* accidentally kill another (non init controlled) daemon instance when stop
  is used
* not restart the daemon depending on config changes when reload is used
* not automatically start/restart daemon when the used netdev was
  created/recreated

The information about a running instance and its parameters can now be
handled by a global controller (procd). The process must not fork anymore
and leave the control to procd. The process with its parameters can then be
used by procd to trigger the stop/start of the process at the right time.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
6 months agobatmand: Convert to procd based init script
Sven Eckelmann [Sat, 27 Jul 2019 21:33:35 +0000 (23:33 +0200)]
batmand: Convert to procd based init script

The legacy init script had various problems in comparison with procd based
init scripts. It wasn't able to correctly track the running process
instance and thus could:

* accidentally kill another (non init controlled) daemon instance when stop
  is used
* not restart the daemon depending on config changes when reload is used

The information about a running instance and its parameters can now be
handled by a global controller (procd). The process must not fork anymore
and leave the control to procd. The process with its parameters can then be
used by procd to trigger the stop/start of the process at the right time.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
6 months agobatctl: Use standard Build/Compile rule 488/head
Sven Eckelmann [Sat, 27 Jul 2019 20:10:04 +0000 (22:10 +0200)]
batctl: Use standard Build/Compile rule

batctl isn't using any special rules in Build/Compile. It is cleaner to
directly use the global Build/Compile/Default instead of having a
functional similar copy in the package Makefile

Signed-off-by: Sven Eckelmann <sven@narfation.org>
6 months agoalfred: Drop unused init-y variable
Sven Eckelmann [Sat, 27 Jul 2019 20:29:04 +0000 (22:29 +0200)]
alfred: Drop unused init-y variable

The Makefile defines the init-y variable but neither this Makefile nor
OpenWrt's common files use this variable.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
6 months agoalfred: Use standard Build/Compile rule
Sven Eckelmann [Sat, 27 Jul 2019 20:10:04 +0000 (22:10 +0200)]
alfred: Use standard Build/Compile rule

alfred isn't using any special rules in Build/Compile. It is cleaner to
directly use the global Build/Compile/Default instead of having a
functional similar copy in the package Makefile

Signed-off-by: Sven Eckelmann <sven@narfation.org>
6 months agovis: Use standard Build/Compile rule
Sven Eckelmann [Sat, 27 Jul 2019 20:10:04 +0000 (22:10 +0200)]
vis: Use standard Build/Compile rule

vis isn't using any special rules in Build/Compile. It is cleaner to
directly use the global Build/Compile/Default instead of having a
functional similar copy in the package Makefile

Signed-off-by: Sven Eckelmann <sven@narfation.org>
6 months agovis: Drop unused make parameters
Sven Eckelmann [Sat, 27 Jul 2019 20:02:50 +0000 (22:02 +0200)]
vis: Drop unused make parameters

Signed-off-by: Sven Eckelmann <sven@narfation.org>
6 months agobatmand: Use standard Build/Compile rule
Sven Eckelmann [Sat, 27 Jul 2019 20:10:04 +0000 (22:10 +0200)]
batmand: Use standard Build/Compile rule

batmand isn't using any special rules in Build/Compile. It is cleaner to
directly use the global Build/Compile/Default instead of having a
functional similar copy in the package Makefile

Signed-off-by: Sven Eckelmann <sven@narfation.org>
6 months agobatmand: Drop unused make parameters
Sven Eckelmann [Sat, 27 Jul 2019 20:02:50 +0000 (22:02 +0200)]
batmand: Drop unused make parameters

Signed-off-by: Sven Eckelmann <sven@narfation.org>
6 months agobatmand: Drop batgat kernel module
Sven Eckelmann [Sat, 27 Jul 2019 19:52:58 +0000 (21:52 +0200)]
batmand: Drop batgat kernel module

This kernel module is broken since 2013 and doesn't build. It can therefore
be removed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
6 months agoMerge pull request #485 from ecsv/batadv-2019.2
Simon Wunderlich [Mon, 22 Jul 2019 08:39:41 +0000 (10:39 +0200)]
Merge pull request #485 from ecsv/batadv-2019.2

batman-adv: Use Linux 5.2 API again

6 months agobatman-adv: Use Linux 5.2 API again 485/head
Sven Eckelmann [Mon, 22 Jul 2019 07:54:49 +0000 (09:54 +0200)]
batman-adv: Use Linux 5.2 API again

The mac80211 package version was updated to a 5.2 based one in commit
0b2c42ced21a ("mac80211: Update to version 5.2-rc7"). The batman-adv module
must therefore no longer the pre-5.2 API.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
6 months agoMerge pull request #483 from aparcar/luci-app-bmx7-transfer
Axel Neumann [Thu, 18 Jul 2019 17:31:21 +0000 (19:31 +0200)]
Merge pull request #483 from aparcar/luci-app-bmx7-transfer

luci-app-bmx7: transfer to luci.git

6 months agonodogsplash: Release 4.0.0 (#484)
Rob White [Mon, 15 Jul 2019 12:23:31 +0000 (13:23 +0100)]
nodogsplash: Release 4.0.0 (#484)

Maintainer: Moritz Warning <moritzwarning@web.de>

Compiled and tested on snapshot SDK mips_24kc and arm_cortex-a5_neon-vfpv4/

  * Introduce aes encryption of the query string passed to remote FAS, allowing authdir and client token to be transferred securely. Uses php-cli and php-openssl. These are required if encryption is enabled but are not dependencies [bluewavenet]
  * Introduce fasremotefqdn, specifying the FQDN of the remote FAS. This facilitates simplified support for FAS operation on shared hosting systems [bluewavenet]
  * Add a FAS php script supporting aes encrypted query string sent from NDS [bluewavenet]
  * Numerous Documentation updates [bluewavenet]
  * Remove unused pagesdir and imagesdir [mwarning]
  * Add Preauth script that displays images from remote servers [bluewavenet]
  * Use elegant check for valid ip addresses [mwarning]
  * openwrt initscript - add missing macmechanism in the config file [lynxis]

Signed-off-by: Rob White <rob@blue-wave.net>
6 months agoluci-app-bmx7: transfer to luci.git 483/head
Paul Spooren [Thu, 11 Jul 2019 09:06:43 +0000 (11:06 +0200)]
luci-app-bmx7: transfer to luci.git

The package was recently[0] moved to luci.git

[0]: https://github.com/openwrt/luci/commit/9aa507790e8a75ab8f52e267e29059a080d55122

Signed-off-by: Paul Spooren <mail@aparcar.org>
6 months agomcproxy: fix up sourcefilter patch 476/head
John Crispin [Sun, 30 Jun 2019 11:03:23 +0000 (13:03 +0200)]
mcproxy: fix up sourcefilter patch

this spewed out 2 compile warnings

In file included from build_dir/target-mipsel_24kc_musl/mcproxy-2017-08-24-93b5ace42268160ebbfff4c61818fb15fa2d9b99/mcproxy/src/utils/mc_socket.cpp:43:0:

build_dir/target-mipsel_24kc_musl/mcproxy-2017-08-24-93b5ace42268160ebbfff4c61818fb15fa2d9b99/mcproxy/src/utils/sourcefilter.cpp: In function 'int setsourcefilter(int, uint32_t, const sockaddr*, socklen_t, uint32_t, uint32_t, const sockaddr_storage*)':
build_dir/target-mipsel_24kc_musl/mcproxy-2017-08-24-93b5ace42268160ebbfff4c61818fb15fa2d9b99/mcproxy/src/utils/sourcefilter.cpp:157:3: warning: this 'else' clause does not guard... [-Wmisleading-indentation]
   else
   ^~~~
build_dir/target-mipsel_24kc_musl/mcproxy-2017-08-24-93b5ace42268160ebbfff4c61818fb15fa2d9b99/mcproxy/src/utils/sourcefilter.cpp:160:5: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'else'
     int save_errno = errno;
     ^~~

Signed-off-by: John Crispin <john@phrozen.org>
6 months agomcproxy: add igmpV2 reply support
John Crispin [Wed, 5 Jun 2019 18:33:42 +0000 (20:33 +0200)]
mcproxy: add igmpV2 reply support

mcproxy has no way to send an IGMPv2 query today. If you force IGMPv2 (by
setting the protocol in the mcproxy config and setting the force_igmp_version
flag on all interfaces) the bridge will send v2 queries but if mcproxy takes
over as the querier it will send v3 queries. The patch below adds support for
sending v2 queries so everyone stays in sync:

Signed-off-by: Sukru Senli <sukru.senli@iopsys.eu>
Signed-off-by: Chad Monroe <chad.monroe@smartrg.com>
Signed-off-by: John Crispin <john@phrozen.org>
7 months agoMerge pull request #440 from tohojo/bird-203
Jo-Philipp Wich [Wed, 26 Jun 2019 17:27:47 +0000 (19:27 +0200)]
Merge pull request #440 from tohojo/bird-203

bird2: Bump to v2.0.4

7 months agoMerge pull request #441 from BKPepe/bird1
Jo-Philipp Wich [Wed, 26 Jun 2019 17:13:53 +0000 (19:13 +0200)]
Merge pull request #441 from BKPepe/bird1

bird1: update to version 1.6.6

7 months agoMerge pull request #479 from neheb/master
Jo-Philipp Wich [Wed, 26 Jun 2019 17:02:51 +0000 (19:02 +0200)]
Merge pull request #479 from neheb/master

Build fixes

7 months agocjdns: Do not build on ARC 479/head
Rosen Penev [Mon, 27 May 2019 23:48:46 +0000 (16:48 -0700)]
cjdns: Do not build on ARC

Is not supported by node.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
7 months agomcproxy: Fix compilation with uClibc-ng
Rosen Penev [Mon, 27 May 2019 07:04:01 +0000 (00:04 -0700)]
mcproxy: Fix compilation with uClibc-ng

uClibc-ng also defines __GLIBC__, which messes up the check.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
7 months agoMerge pull request #478 from ecsv/batadv-for-19.07
Simon Wunderlich [Sun, 16 Jun 2019 09:27:08 +0000 (11:27 +0200)]
Merge pull request #478 from ecsv/batadv-for-19.07

batman-adv: Add support for B.A.T.M.A.N. V hardif settings

7 months agobatman-adv: Don't try to set unconfigured ap_isolation for vlan 478/head
Sven Eckelmann [Sun, 16 Jun 2019 07:27:08 +0000 (09:27 +0200)]
batman-adv: Don't try to set unconfigured ap_isolation for vlan

The ap_isolation setting only supports boolean values. So setting an empty
string as ap_isolation is not supported by batctl.

Fixes: f5205d7d2434 ("batman-adv: upgrade package to latest release 2014.2.0")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
7 months agobatman-adv: Add support for hardif settings
Sven Eckelmann [Sat, 15 Jun 2019 07:25:05 +0000 (09:25 +0200)]
batman-adv: Add support for hardif settings

B.A.T.M.A.N. V support additional settings which are hardif specific. The
batadv_hardif proto has to expose them to allow automatic configuration.
The default configuration would be:

  config interface 'bat0_hardif_eth0'
   option proto 'batadv_hardif'
   option master 'bat0'
   option ifname 'eth0'
   option mtu '1536'
   option 'elp_interval' 500
   # string like '1mbit' is accepted instead of kbit for override
   option 'throughput_override' '0'

Signed-off-by: Sven Eckelmann <sven@narfation.org>
7 months agobatctl: Add support for hardif settings
Sven Eckelmann [Sat, 15 Jun 2019 07:18:51 +0000 (09:18 +0200)]
batctl: Add support for hardif settings

batctl currently supports settings which are either mesh interface or vlan
specific. But B.A.T.M.A.N. V introduced two additional settings which are
hard (slave) interface specific.

To support these, an additional command prefix called hardif is implemented
for some sysfs commands:

  $ batctl -m bat0 hardif eth0 ..

The usable commands with that are:

* elp_interval
* throughput_override

Signed-off-by: Sven Eckelmann <sven@narfation.org>
7 months agomcproxy: fix block/filtering code
John Crispin [Wed, 5 Jun 2019 18:30:54 +0000 (20:30 +0200)]
mcproxy: fix block/filtering code

mcproxy supports a generic filtering/blacklisting mechanism but it’s currently
broken. In the case of routed video (e.g. mcproxy routing video from
WAN -> LAN), it will forward multicast between the LAN and WAN. There are
perfectly valid use cases for this like reporting but other less-appropriate
things like mDNS and SSDP leak through from LAN -> WAN which is bad.

Signed-off-by: Sukru Senli <sukru.senli@iopsys.eu>
Signed-off-by: Chad Monroe <chad.monroe@smartrg.com>
Signed-off-by: John Crispin <john@phrozen.org>
7 months agoMerge pull request #475 from ecsv/batadv-2019.2
Simon Wunderlich [Sun, 2 Jun 2019 20:41:20 +0000 (22:41 +0200)]
Merge pull request #475 from ecsv/batadv-2019.2

batman-adv: Fix duplicated OGMs on NETDEV_UP

7 months agobatman-adv: Fix duplicated OGMs on NETDEV_UP 475/head
Sven Eckelmann [Sun, 2 Jun 2019 09:46:25 +0000 (11:46 +0200)]
batman-adv: Fix duplicated OGMs on NETDEV_UP

The state of slave interfaces are handled differently depending on whether
the interface is up or not. All active interfaces (IFF_UP) will transmit
OGMs. But for B.A.T.M.A.N. IV, also non-active interfaces are scheduling
(low TTL) OGMs on active interfaces. The code which setups and schedules
the OGMs must therefore already be called when the interfaces gets added as
slave interface and the transmit function must then check whether it has to
send out the OGM or not on the specific slave interface.

But v2016.3 moved the setup code from the enable function to the activate
function. The latter is called either when the added slave was already up
when batadv_hardif_enable_interface processed the new interface or when a
NETDEV_UP event was received for this slave interfac. As result, each
NETDEV_UP would schedule a new OGM worker for the interface and thus OGMs
would be send a lot more than expected.

Fixes: 549909f89dd7 ("batman-adv: upgrade package to latest release 2016.3")
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
8 months agoMerge pull request #472 from yogo1212/batmand_whitespace
elektra42 [Mon, 27 May 2019 07:04:38 +0000 (09:04 +0200)]
Merge pull request #472 from yogo1212/batmand_whitespace

batmand: whitespace

8 months agobatmand: match loop format 472/head
Leon M. George [Fri, 24 May 2019 22:11:17 +0000 (00:11 +0200)]
batmand: match loop format

8 months agobatmand: fix whitespace
Leon M. George [Thu, 23 May 2019 23:17:41 +0000 (01:17 +0200)]
batmand: fix whitespace

8 months agoMerge pull request #471 from ecsv/batadv-2019.2
Simon Wunderlich [Fri, 24 May 2019 07:45:32 +0000 (09:45 +0200)]
Merge pull request #471 from ecsv/batadv-2019.2

batman-adv 2019.2

8 months agobatman-adv: upgrade package to latest release 2019.2 471/head
Sven Eckelmann [Thu, 23 May 2019 18:13:21 +0000 (20:13 +0200)]
batman-adv: upgrade package to latest release 2019.2

* support latest kernels (3.16 - 5.2)
* coding style cleanups and refactoring
* implement multicast-to-unicast support for multiple targets
* deprecate sysfs support and make it optional
* refresh DAT entry timeouts on incoming ARP Replies
* bugs squashed:

  - fix multicast tt/tvlv worker locking
  - drop roam tvlv handler when unregistering mesh interface

Signed-off-by: Sven Eckelmann <sven@narfation.org>
8 months agobatctl: upgrade package to latest release 2019.2
Sven Eckelmann [Thu, 23 May 2019 18:12:31 +0000 (20:12 +0200)]
batctl: upgrade package to latest release 2019.2

* coding style cleanups and refactoring
* add multicast_fanout setting subcommand
* implement netlink based support for remaining sysfs-only features
* drop support for deprecated log command support
* remove non-netlink support for translating MAC addresses to originators

Signed-off-by: Sven Eckelmann <sven@narfation.org>
8 months agoalfred: upgrade package to latest release 2019.2
Sven Eckelmann [Thu, 23 May 2019 18:11:42 +0000 (20:11 +0200)]
alfred: upgrade package to latest release 2019.2

* synchronization of batman-adv netlink header

Signed-off-by: Sven Eckelmann <sven@narfation.org>
8 months agobird2: Bump to v2.0.4 440/head
Toke Høiland-Jørgensen [Mon, 14 Jan 2019 08:47:10 +0000 (09:47 +0100)]
bird2: Bump to v2.0.4

Bird 2.0.4 was released on March 1st. Remove upstreamed patches.

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
8 months agonodogsplash: Release v3.3.2-1 (#468)
Rob White [Tue, 7 May 2019 20:38:40 +0000 (21:38 +0100)]
nodogsplash: Release v3.3.2-1 (#468)

Maintainer: Moritz Warning <moritzwarning@web.de>

Compiled and tested on snapshot SDK mips_24kc and arm_cortex-a5_neon-vfpv4/

  * Fix Issue introduced in v3.3.0 with the addition of Improvements towards usable IPv6 support, that caused CPD on client devices to fail with "Too Many Redirects" error. NDS now terminates gracefully with a console error if fasremoteip is set AND fasport=80  [bluewavenet]
  * Validate fasremoteip to ensure that if it is set, then it is a valid dotted format IPv4 address  [bluewavenet]
  * Numerous Documentation updates  [bluewavenet]
  * Fix to Known Issue on OpenWrt >18.x.x with v3.3.1. This was caused by misconfigured Makefile for libmicrohttpd; this has been fixed there [bluewavenet]

Signed-off-by: Rob White <rob@blue-wave.net>
8 months agoMerge pull request #467 from lynxis/remove-smcroute
Jo-Philipp Wich [Tue, 30 Apr 2019 21:52:53 +0000 (23:52 +0200)]
Merge pull request #467 from lynxis/remove-smcroute

smcroute: remove package as it's orphaned

9 months agosmcroute: remove package as it's orphaned 467/head
Alexander Couzens [Tue, 23 Apr 2019 09:59:23 +0000 (11:59 +0200)]
smcroute: remove package as it's orphaned

If someone like to become the maintainer, please re-submit this package
to the general openwrt package repository
https://github.com/openwrt/packages

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
9 months agoMerge pull request #459 from pmelange/olsrd_0.9.7
Bastian Bittorf [Mon, 1 Apr 2019 05:30:42 +0000 (07:30 +0200)]
Merge pull request #459 from pmelange/olsrd_0.9.7

[OLSRd] Bump OLSRd version to 0.9.7

9 months agoMerge pull request #461 from ecsv/batadv-2019.1
Simon Wunderlich [Fri, 29 Mar 2019 12:32:50 +0000 (13:32 +0100)]
Merge pull request #461 from ecsv/batadv-2019.1

batman-adv 2019.1

10 months agobatman-adv: upgrade package to latest release 2019.1 461/head
Sven Eckelmann [Sun, 17 Mar 2019 08:35:50 +0000 (09:35 +0100)]
batman-adv: upgrade package to latest release 2019.1

* support latest kernels (3.16 - 5.1)
* coding style cleanups and refactoring
* implement meshif, hardif and vlan config interface via netlink
* snoop DHCP ACKs to improve DAT cache efficiency
* bugs squashed:

  - avoid potential reference counter underflows and use-after free errors for
    several objects
  - fix GCC warning when B.A.T.M.A.N. V is build in but cfg80211 is not
    available
  - reject too small VLAN packets before they are processed further

Signed-off-by: Sven Eckelmann <sven@narfation.org>
10 months agobatctl: upgrade package to latest release 2019.1
Sven Eckelmann [Sun, 17 Mar 2019 08:35:50 +0000 (09:35 +0100)]
batctl: upgrade package to latest release 2019.1

* coding style cleanups and refactoring
* introduce support for batadv meshif, hardif and vlan configuration via netlink
* replace multicast_mode with multicast_forceflood settings subcommand
* add hop_penalty setting subcommand

Signed-off-by: Sven Eckelmann <sven@narfation.org>
10 months agoalfred: upgrade package to latest release 2019.1
Sven Eckelmann [Thu, 28 Mar 2019 18:40:20 +0000 (19:40 +0100)]
alfred: upgrade package to latest release 2019.1

* synchronization of batman-adv netlink header

Signed-off-by: Sven Eckelmann <sven@narfation.org>
10 months agobatctl: Add package description per variant
Sven Eckelmann [Sun, 17 Mar 2019 08:32:33 +0000 (09:32 +0100)]
batctl: Add package description per variant

Fixes: 129986825219 ("batctl: Provide different variants")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
10 months agonodogsplash: Add missing install directories (#460)
Rob White [Mon, 25 Mar 2019 17:03:29 +0000 (17:03 +0000)]
nodogsplash: Add missing install directories (#460)

Add missing install directories in revised Makefile

Signed-off-by: Rob White rob@blue-wave.net
10 months agonodogsplash: Bump to v3.3.0-1 (#457)
Rob White [Mon, 25 Mar 2019 13:28:02 +0000 (13:28 +0000)]
nodogsplash: Bump to v3.3.0-1 (#457)

Signed-off-by: Rob White <rob@blue-wave.net>
10 months ago[OLSRd] Bump OLSRd version to 0.9.7 459/head
pmelange [Sat, 23 Mar 2019 13:16:40 +0000 (14:16 +0100)]
[OLSRd] Bump OLSRd version to 0.9.7

This patch bumps OLSRd from 0.9.6.2 to 0.9.7 (released 06-March-2019)

Signed-off-by: pmelange <isprotejesvalkata@gmail.com>
10 months agoMerge pull request #458 from adrianschmutzler/fixcommit
Simon Wunderlich [Wed, 20 Mar 2019 16:50:20 +0000 (17:50 +0100)]
Merge pull request #458 from adrianschmutzler/fixcommit

batman-adv: Fix uci commit target

10 months agobatman-adv: Fix uci commit target 458/head
Adrian Schmutzler [Tue, 19 Mar 2019 18:49:27 +0000 (19:49 +0100)]
batman-adv: Fix uci commit target

Although batman-adv config is cycled in config_foreach, changes
are made in the network config. Thus, this one has to be committed.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
10 months agonodogsplash: fix invalid pointer bug when clock is turned back (#456)
Moritz Warning [Thu, 14 Mar 2019 17:23:32 +0000 (18:23 +0100)]
nodogsplash: fix invalid pointer bug when clock is turned back (#456)

Signed-off-by: Moritz Warning <moritzwarning@web.de>
10 months agoMerge pull request #454 from dangowrt/master
Axel Neumann [Wed, 13 Mar 2019 21:44:14 +0000 (22:44 +0100)]
Merge pull request #454 from dangowrt/master

bmx7: update source to 2019030802

10 months agobird1: update to version 1.6.6 441/head
Josef Schlehofer [Wed, 13 Mar 2019 09:25:08 +0000 (10:25 +0100)]
bird1: update to version 1.6.6

Signed-off-by: Josef Schlehofer <josef.schlehofer@nic.cz>
10 months agobmx7: update source to 2019030802 454/head
Daniel Golle [Fri, 8 Mar 2019 02:58:35 +0000 (03:58 +0100)]
bmx7: update source to 2019030802

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
10 months agoMerge pull request #453 from ecsv/batadv-2019.0
Simon Wunderlich [Thu, 7 Mar 2019 16:04:54 +0000 (17:04 +0100)]
Merge pull request #453 from ecsv/batadv-2019.0

batman-adv: Split batadv proto in meshif and hardif part

10 months agobatman-adv: Split batadv proto in meshif and hardif part 453/head
Sven Eckelmann [Sun, 24 Feb 2019 16:51:13 +0000 (17:51 +0100)]
batman-adv: Split batadv proto in meshif and hardif part

batman-adv allows to configure three different objects:

* batadv hardif

  - network interface used by batadv meshif to transport the batman-adv
    packets
  - its master interface is set to the batadv meshif

* batadv (meshif/softif)

  - virtual interface that emulates a normal 802.3 interface on top
  - encapsulates traffic and forwards it via the batadv hardifs

* batadv vlan

  - potential VLAN ID on top of batadv meshif
  - allows filtering of traffic from specific VIDs

While batadv vlan objects were already represented as an own proto
"batadv_vlan", the batadv meshif could never be fully configured using
/etc/config/network. Instead, parts of its configuration were stored in
/etc/config/batman_adv and some in the interfaces with the "batadv" proto.

To increase the confusion, the "batadv" proto wasn't used to define the
batadv meshif but to identify batadv (slave) hardifs. The batman-adv
meshifs were also never created directly but only when a hardif was
configured. The actual modification of the configuration settings was then
applied using a hotplug script hack. The batadv meshif network interface
could therefore only be created when an hardif was available and not
manipulated with ifup/ifdown. Also `/etc/init.d/network reload` didn't
modify the batadv meshif interface configuration correctly.

The "batadv" is now renamed to "batadv_hardif" and a new "batadv" proto is
used to configure the main (meshif) network interface with all its
configuration.

A simple network configuration with WiFi & ethernet interfaces and static
IP on top of bat0 would look like:

  # batadv meshif bat0
  config interface 'bat0'
   option proto 'batadv'
   option routing_algo 'BATMAN_IV'
   option aggregated_ogms 1
   option ap_isolation 0
   option bonding 0
   option fragmentation 1
   #option gw_bandwidth '10000/2000'
   option gw_mode 'off'
   #option gw_sel_class 20
   option log_level 0
   option orig_interval 1000
   option bridge_loop_avoidance 1
   option distributed_arp_table 1
   option multicast_mode 1
   option network_coding 0
   option hop_penalty 30
   option isolation_mark '0x00000000/0x00000000'

  # add *single* wifi-iface with network bat0_hardif_wlan as hardif to bat0
  config interface 'bat0_hardif_wlan'
   option mtu '1536'
   option proto 'batadv_hardif'
   option master 'bat0'
   # option ifname is filled out by the wifi-iface

  # add eth0 as hardif to bat0
  config interface 'bat0_hardif_eth0'
   option proto 'batadv_hardif'
   option master 'bat0'
   option ifname 'eth0'
   option mtu '1536'

  # configure IP on bat0
  config interface 'bat0_lan'
   option ifname 'bat0'
   option proto 'static'
   option ipaddr '192.168.1.1'
   option netmask '255.255.255.0'
   option ip6assign '60'

Signed-off-by: Sven Eckelmann <sven@narfation.org>
10 months agoMerge pull request #451 from ecsv/batadv-2019.0
Simon Wunderlich [Thu, 7 Mar 2019 15:56:37 +0000 (16:56 +0100)]
Merge pull request #451 from ecsv/batadv-2019.0

batman-adv: finish config batctl usage & drop unused compat code

11 months agobatman-adv: use batctl for configuration of hop_penalty 451/head
Sven Eckelmann [Fri, 22 Feb 2019 20:47:40 +0000 (21:47 +0100)]
batman-adv: use batctl for configuration of hop_penalty

hop_penalty is the last remaining setting which is directly writing to
sysfs instead of using a implementation (sysfs vs. netlink) abstraction
layer. batctl now provides a wrapper function that allows the script to
directly use it to take care of communicating with the driver.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
11 months agobatctl: Add support for hop_penalty settings command
Sven Eckelmann [Fri, 22 Feb 2019 21:31:44 +0000 (22:31 +0100)]
batctl: Add support for hop_penalty settings command

The batman-adv scripts are still using sysfs for setting the hop_penalty.
Since the sysfs is deprecated, the batctl interface should be used to make
it independent of implementation details (sysfs vs. netlink).

Signed-off-by: Sven Eckelmann <sven@narfation.org>
11 months agobatman-adv: use batctl for configuration of gw_mode
Sven Eckelmann [Fri, 22 Feb 2019 20:47:40 +0000 (21:47 +0100)]
batman-adv: use batctl for configuration of gw_mode

The batctl tool should be used for modifying settings in the batman-adv
driver to keep the scripts consistent and allow to use the correct way of
communicating with the kernel (sysfs vs. netlink).

The gw_mode, gw_bandwidth and gw_sel_class options are all handled by
the same gw_mode command in batctl and thus have to be combined depending
on the "gw_mode" value.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
11 months agobatman-adv: Drop cfg80211_get_station memset workaround
Sven Eckelmann [Fri, 22 Feb 2019 19:40:11 +0000 (20:40 +0100)]
batman-adv: Drop cfg80211_get_station memset workaround

The actual memset fix for cfg80211_get_station's sinfo is already part of
the mac80211 package and doesn't have to be shipped anymore with
batman-adv.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
11 months agobatman-adv: Drop compat-hack for __poll_t
Sven Eckelmann [Fri, 22 Feb 2019 19:19:42 +0000 (20:19 +0100)]
batman-adv: Drop compat-hack for __poll_t

__poll_t is already defined by the mac80211's backports and
doesn't have to be redefined in the compat-hacks.h.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
11 months agobatman-adv: Drop compat-hack for from_timer
Sven Eckelmann [Fri, 22 Feb 2019 19:19:42 +0000 (20:19 +0100)]
batman-adv: Drop compat-hack for from_timer

from_timer is already defined by the mac80211's backports and
doesn't have to be redefined in the compat-hacks.h.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
11 months agobatman-adv: Drop compat-hack for skb_put*
Sven Eckelmann [Fri, 22 Feb 2019 19:19:42 +0000 (20:19 +0100)]
batman-adv: Drop compat-hack for skb_put*

skb_put* is already defined by the mac80211's backports and
doesn't have to be redefined in the compat-hacks.h.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
11 months agobatman-adv: Drop compat-hack for nla_put_u64_64bit
Sven Eckelmann [Fri, 22 Feb 2019 19:19:42 +0000 (20:19 +0100)]
batman-adv: Drop compat-hack for nla_put_u64_64bit

nla_put_u64_64bit is already defined by the mac80211's backports and
doesn't have to be redefined in the compat-hacks.h.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
11 months agobatman-adv: Drop compat-hack for netif_trans_update
Sven Eckelmann [Fri, 22 Feb 2019 19:19:42 +0000 (20:19 +0100)]
batman-adv: Drop compat-hack for netif_trans_update

netif_trans_update is already defined by the mac80211's backports and
doesn't have to be redefined in the compat-hacks.h.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
11 months agobatman-adv: Drop redefinition of NL80211_STA_INFO_EXPECTED_THROUGHPUT
Sven Eckelmann [Fri, 22 Feb 2019 19:19:42 +0000 (20:19 +0100)]
batman-adv: Drop redefinition of NL80211_STA_INFO_EXPECTED_THROUGHPUT

NL80211_STA_INFO_EXPECTED_THROUGHPUT is defined by the mac80211 package and
doesn't have to be redefined in the compat-hacks.h.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
11 months agobatman-adv: Drop unused compat-hacks.patch
Sven Eckelmann [Fri, 22 Feb 2019 19:04:35 +0000 (20:04 +0100)]
batman-adv: Drop unused compat-hacks.patch

The linux/build_bug.h is already provided by mac80211's backports. It is
not needed anymore to adjust the includes to use the older linux/bug.h

Signed-off-by: Sven Eckelmann <sven@narfation.org>
11 months agoMerge pull request #448 from SvenRoederer/patch-1
Simon Wunderlich [Fri, 22 Feb 2019 18:30:34 +0000 (19:30 +0100)]
Merge pull request #448 from SvenRoederer/patch-1

batctl: fix wrong binary-name for batctl-default

11 months agoMerge pull request #450 from dangowrt/bmx7-2018122901
Axel Neumann [Thu, 21 Feb 2019 08:10:03 +0000 (09:10 +0100)]
Merge pull request #450 from dangowrt/bmx7-2018122901

bmx7: update to git snapshot as of 2018-12-29: Use MbedTLS 2.8.0

11 months agobmx7: update to git snapshot as of 2018-12-29 450/head
Daniel Golle [Wed, 20 Feb 2019 13:05:41 +0000 (14:05 +0100)]
bmx7: update to git snapshot as of 2018-12-29

* fixes mbedTLS string constant deprecation build breakage
* obsoletes local patch

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
11 months agobatctl: fix wrong binary-name for batctl-default 448/head
Sven Roederer [Mon, 18 Feb 2019 21:40:24 +0000 (22:40 +0100)]
batctl: fix wrong binary-name for batctl-default

* correct binary for batctl-default to /usr/libexec/batctl-default
* while at it fix description of batctl-full

Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>
11 months agoMerge pull request #446 from ecsv/batadv-2019.0
Simon Wunderlich [Mon, 4 Feb 2019 09:12:51 +0000 (10:12 +0100)]
Merge pull request #446 from ecsv/batadv-2019.0

batman-adv 2019.0

11 months agobatman-adv: upgrade package to latest release 2019.0 446/head
Sven Eckelmann [Sun, 27 Jan 2019 15:28:23 +0000 (16:28 +0100)]
batman-adv: upgrade package to latest release 2019.0

* support latest kernels (3.16 - 5.0)
* coding style cleanups and refactoring
* allow to enable debug tracing without full batman-adv debugfs support
* enable inconsistency reporting for most netlink dump commands
* bugs squashed:

  - avoid unnecessary kernel warning (panic) during detection of interface loops
  - work around incorrect ethernet header offset in transmit code path

Signed-off-by: Sven Eckelmann <sven@narfation.org>
11 months agobatctl: upgrade package to latest release 2019.0
Sven Eckelmann [Sun, 27 Jan 2019 15:28:23 +0000 (16:28 +0100)]
batctl: upgrade package to latest release 2019.0

* coding style cleanups and refactoring
* add gateway selection manpage section for B.A.T.M.A.N. V
* bugs squashed:

  - re-integrate support for translation table unicast/multicast filter
  - avoid incorrect warning about disabled mesh interface when debugfs
    support is not enabled in batman-adv

Signed-off-by: Sven Eckelmann <sven@narfation.org>
11 months agoalfred: upgrade package to latest release 2019.0
Sven Eckelmann [Sun, 27 Jan 2019 15:28:23 +0000 (16:28 +0100)]
alfred: upgrade package to latest release 2019.0

* (no changes)

Signed-off-by: Sven Eckelmann <sven@narfation.org>