projects / openwrt / openwrt.git / search
| 2023-10-17 | Shiji Yang | ramips: fix mtd partition node names for Phicomm PSG1208 ...fix mtd partition node names for Phicomm PSG1208 |
commit | commitdiff | tree |
| 2023-06-25 | Davide Fioravanti | bcm53xx: add Wavlink Quantum DAX/WL-WN538A8 as alt... this router is based on the Phicomm K3. Just the flashing method is... |
commit | commitdiff | tree |
| 2022-06-13 | Aviana Cruz | ramips: decrease SPI frequency for Phicomm K2P ramips: decrease SPI frequency for Phicomm K2P |
commit | commitdiff | tree |
| 2022-03-13 | Chukun Pan | ramips: update WLAN MAC address of Phicomm K2P ramips: update WLAN MAC address of Phicomm K2P |
commit | commitdiff | tree |
| 2021-08-24 | Shiji Yang | ramips: add new flash layout support to Phicomm K2 ...add new flash layout support to Phicomm K2 Phicomm K2 (PSG1218) got a new "permanent_confi... firmware partition, same as The Phicomm K2P and K2G. Due to this ...commit is aimed at add support for Phicomm K2 which official ...recognizable name K2, refer to Phicomm K2G, v22.4.x.x or older phicomm_k2-v22.4 v22.5.x.x or newer phicomm_k2-v22.5 Same as Phicomm K2G, K2P, PSG1208. |
commit | commitdiff | tree |
| 2021-08-24 | Adrian Schmutzler | ramips: mt7620: move Phicomm MAC address setup to DTSI ramips: mt7620: move Phicomm MAC address setup to DTSI |
commit | commitdiff | tree |
| 2021-03-21 | Shiji Yang | ramips: create shared DTSI for MT7620 Phicomm K2x series... ...create shared DTSI for MT7620 Phicomm K2x series devices |
commit | commitdiff | tree |
| 2021-03-21 | Shiji Yang | ramips: increase SPI frequency for Phicomm series devices ramips: increase SPI frequency for Phicomm series devices ...image in the internet, I find Phicomm K1/k2 series use |
commit | commitdiff | tree |
| 2021-02-23 | Shiji Yang | ramips: improve gpio control for Phicomm PSG1218 ramips: improve gpio control for Phicomm PSG1218 Phicomm K2G. |
commit | commitdiff | tree |
| 2021-02-22 | Shiji Yang | ramips: fix Phicomm PSG1218A switch port labels ramips: fix Phicomm PSG1218A switch port labels |
commit | commitdiff | tree |
| 2021-02-22 | Shiji Yang | ramips: correct/add Phicomm K2x WAN/label MAC address ramips: correct/add Phicomm K2x WAN/label MAC address Phicomm K2G: Phicomm PSG1218A & PSG1218B: |
commit | commitdiff | tree |
| 2020-10-27 | Nuno Goncalves | ramips: add support for Wavlink WL-WN530HG4 Same hardware as Phicomm K2G but different flash layout. |
commit | commitdiff | tree |
| 2020-01-18 | Adrian Schmutzler | ath79: add led_ prefix for Phicomm K2T LED label ath79: add led_ prefix for Phicomm K2T LED label |
commit | commitdiff | tree |
| 2019-10-13 | Roger Pueyo Centelles | ramips: mt7621: Alternative name KE 2P for Phicomm K2P ...mt7621: Alternative name KE 2P for Phicomm K2P The Phicomm KE 2P is identical to the already... |
commit | commitdiff | tree |
| 2019-09-07 | Adrian Schmutzler | ramips: clean and improve MAC address setup in 02_network - phicomm,k2g - phicomm,k2p |
commit | commitdiff | tree |
| 2019-08-18 | Deng Qingfang | ramips: add MT7530 switch port-mirroring support [Tested on Phicomm PSG1218 rev.A, MediaTek MT7620A... |
commit | commitdiff | tree |
| 2019-07-25 | Adrian Schmutzler | ramips: consolidate MAC address cases in 02_network cases for phicomm k2p] |
commit | commitdiff | tree |
| 2019-07-25 | Adrian Schmutzler | ramips/mt7621: fix IMAGE_SIZE for all devices phicomm_k2p 15744k 0xf60000 |
commit | commitdiff | tree |
| 2019-07-25 | Adrian Schmutzler | ramips/mt7620: fix IMAGE_SIZE for all devices phicomm_k2g 7552k 0x760000 phicomm_psg1208 - 0x7b0000... phicomm_psg1218a - 0x7b0000... phicomm_psg1218b - 0x7b0000... |
commit | commitdiff | tree |
| 2019-07-25 | Chuanhong Guo | ramips: fix mac addresses used by Phicomm K2P ramips: fix mac addresses used by Phicomm K2P Like most mt7621 boards, Phicomm K2P stores LAN/WAN mac addresses Phicomm uses lan_mac-1 as wan_mac, while... ...reading lan/wan mac address for Phicomm K2P. |
commit | commitdiff | tree |
| 2019-07-25 | Roger Pueyo Centelles | ramips: add kmod-mt7615e to Phicomm K2P images ramips: add kmod-mt7615e to Phicomm K2P images |
commit | commitdiff | tree |
| 2019-01-20 | Hao Dong | bcm53xx: add support for Phicomm K3 bcm53xx: add support for Phicomm K3 |
commit | commitdiff | tree |
| 2018-06-21 | Chuanhong Guo | ramips: Add support for Phicomm K2G ramips: Add support for Phicomm K2G |
commit | commitdiff | tree |
| 2018-06-18 | Weijie Gao | ath79: add support for Phicomm K2T ath79: add support for Phicomm K2T ...for qca956x and also support for Phicomm K2T The Phicomm K2T uses MTD partition 'config... Hardware spec of Phicomm K2T: |
commit | commitdiff | tree |
| 2017-09-15 | Jiawei Wang | ramips: fix used MAC addresses for Phicomm K2P ramips: fix used MAC addresses for Phicomm K2P The factory partition of the Phicomm K2P contains two MAC addresses. |
commit | commitdiff | tree |
| 2017-07-20 | Chuanhong Guo | ramips: add support for Phicomm K2P ramips: add support for Phicomm K2P |
commit | commitdiff | tree |
| 2017-06-12 | 小桥 | ramips: fix Phicomm K1S(PSG1208) pinmux ramips: fix Phicomm K1S(PSG1208) pinmux |
commit | commitdiff | tree |
| 2017-04-21 | Daniel Golle | ramips: split Phicomm PSG1218 and PSG1218K2C ramips: split Phicomm PSG1218 and PSG1218K2C |
commit | commitdiff | tree |
| 2016-10-04 | Xuefu Lin | ramips: Add support for Phicomm K2 PSG1218 ramips: Add support for Phicomm K2 PSG1218 |
commit | commitdiff | tree |
| 2016-02-15 | John Crispin | ramips: Add support for Phicomm PSG1208 ramips: Add support for Phicomm PSG1208 This patch adds support for Phicomm PSG1208.This is a router with... |
commit | commitdiff | tree |
| 2013-09-16 | Hauke Mehrtens | brcm47xx: add detection for Phicomm M1 brcm47xx: add detection for Phicomm M1 |
commit | commitdiff | tree |