projects / openwrt / openwrt.git / search
| 20 hours ago | jonathan brophy | Qualcommax: IPQ807x: Add support for TP-Link Deco X80-5G ...Advanced Pro (Cat20 down 2Gbps) (Cat18 up 200Mbps) |
commit | commitdiff | tree |
| 2025-04-06 | Ming Kuang | wifi-scripts: mac80211.sh: add EHT and HE160 support... 1. Set iw_htmode to 160MHz for VHT160. The reason for the current VHT160 setting is unclear and seems... |
commit | commitdiff | tree |
| 2025-04-02 | Kyle Hendry | bmips: add support for Actiontec T1200H bmips: add support for Actiontec T1200H ...openwrt-bmips-bcm63268-actiontec_t1200h-initramfs.elf ...openwrt-bmips-bcm63268-actiontec_t1200h-squashfs-cfe.bin /tmp/ ...openwrt-bmips-bcm63268-actiontec_t1200h-squashfs-cfe.bin |
commit | commitdiff | tree |
| 2025-04-02 | Álvaro Fernández... | bcm63xx-cfe: update to latest version actiontec: t1200h: add cferam.000 file |
commit | commitdiff | tree |
| 2025-03-28 | Weikai Kong | qualcommax: ipq60xx: add Linksys MR7500 support ...boot_part = 1; then run bootpart1; else run bootpart2; fi' ...boot_part = 1; then run bootpart1; else run bootpart2; fi' ...boot_part = 1; then run bootpart1; else run bootpart2; fi' |
commit | commitdiff | tree |
| 2025-03-27 | Paul Donald | lldpd: bump to 1.0.19 Built on 2025-03-24T17:43:44Z ...LLDP features: LLDP-MED, Dot1, Dot3, Custom TLV |
commit | commitdiff | tree |
| 2025-03-24 | Chukun Pan | qualcommax: ipq60xx: add GL.iNet GL-AX1800/AXT1800... ...ipq60xx: add GL.iNet GL-AX1800/AXT1800 support SD slot: 1 in GL-AXT1800 |
commit | commitdiff | tree |
| 2025-03-16 | Lech Perczak | ath79: support ZTE MF286C ... cat /dev/mtd9 > mtd5_ubiconcat1.bin (scp -O mtd5_ubiconcat1.bin root@192.168.1.1:/tmp/) mtd write ubiconcat1 /tmp/mtd5_ubiconcat1.bin rm /tmp/mtd5_ubiconcat1.bin |
commit | commitdiff | tree |
| 2025-03-09 | Bernardus Jansen | ath79: add support for Fortinet FAP-221-C "fwconcat0", "loader", and "fwconcat1" |
commit | commitdiff | tree |
| 2025-03-02 | George Moussalem | qualcommax: ipq50xx: Add support for Linksys MR5500 ...boot_part = 1; then run bootpart1; else run bootpart2; fi' |
commit | commitdiff | tree |
| 2025-02-24 | Daniel Golle | linux-firmware: update to 20250211 ...qcom:x1e80100: Support for Lenovo T14s G6 Qualcomm platform ...qcom:x1e80100: Support for Lenovo T14s G6 Qualcomm platform |
commit | commitdiff | tree |
| 2025-02-19 | Michael Trinidad | mwlwifi: update to version 10.4.11-20250206 The fixes are only for the WRT1900X and WRT1200AC. |
commit | commitdiff | tree |
| 2025-02-19 | Sean Khan | wifi-scripts: fix missing VHT capabilities detection ...parentheses in the conditionals for VHT160/VHT160-80PLUS80 * Change the `vht160` condition to `config.vht160... |
commit | commitdiff | tree |
| 2025-02-19 | Sean Khan | wifi-scripts: fix vht_oper_centr_freq_seg0_idx_map... ...selecting channels above 100 in VHT160+ modes the center width specification for VHT160, HE160, and EHT160. |
commit | commitdiff | tree |
| 2025-01-27 | Robert Marko | generic: add missing CONFIG_LEDS_ST1202 symbol generic: add missing CONFIG_LEDS_ST1202 symbol ST1202 controller was added recently... |
commit | commitdiff | tree |
| 2025-01-21 | INAGAKI Hiroshi | realtek: add support for XikeStor SKS8300-8X 2. Connect your PC to Port1 on SKS8300-8X 6. Enable Port1 with the following commands |
commit | commitdiff | tree |
| 2025-01-20 | Lech Perczak | ath79: add support for Ruckus R500 1x TPM, SLB9645TT12 ...presence switch for the SLB9645TT12 TPM. |
commit | commitdiff | tree |
| 2025-01-19 | Aleksander Jan Bajkowski | mediatek: EX5601-T0 add Zyxel EX5601-T1 and T-56 alias mediatek: EX5601-T0 add Zyxel EX5601-T1 and T-56 alias Define EX5601-T1 and T-56 as alternative name,... ...supported using existing image. EX5601-T1 does not version of the EX5601-T1. |
commit | commitdiff | tree |
| 2025-01-19 | Andrea Pesaresi | ethtool: update to 6.11 * Feature: add T1BRR 10Mb/s mode to link mode tables |
commit | commitdiff | tree |
| 2025-01-19 | Manuel Fombuena | generic: add leds_st1202 patch to fix NULL pointer... generic: add leds_st1202 patch to fix NULL pointer access As per @KanjiMonster comment: st1202_dt_init() calls devm_led_classdev_re... |
commit | commitdiff | tree |
| 2025-01-12 | Robert Senderek | mvebu: Add support for WD Cloud Mirror Gen2 Weltrend MCU WT6703F connected via UART1 for Power LED / PWM Fan / hw reset... Weltrend MCU control is done via uart1 19200 |
commit | commitdiff | tree |
| 2025-01-04 | Shiji Yang | ramips: mmc-mtk: add more vendor driver register init... MSDC_PATCH_BIT1 have different init values than... |
commit | commitdiff | tree |
| 2024-12-31 | Paweł Owoc | qualcommax: ipq807x: add support for Linksys MX4300... ...boot_part = 1; then run bootpart1; else run bootpart2; fi' |
commit | commitdiff | tree |
| 2024-11-30 | Andreas Böhler | ath79: add support for KuWFi N650 CPE $ dd if=fullbackup.bin of=fwconcat1.bin bs=65536 skip=217 count=22 $ cat fwconcat0.bin fwconcat1.bin > firmware.bin |
commit | commitdiff | tree |
| 2024-10-19 | Stefan Lippers-Hollmann | linux-firmware: Update to version 20241017 realtek/rt1320/rt1320-patch-code-vab.bin realtek/rt1320/rt1320-patch-code-vc.bin |
commit | commitdiff | tree |
| 2024-10-17 | David Bauer | mpc85xx: convert Watchguard T10 mac-assignment to NVMEM mpc85xx: convert Watchguard T10 mac-assignment to NVMEM |
commit | commitdiff | tree |
| 2024-09-22 | Antonio Flores | rockchip: add FriendlyElec NanoPi R6C ...NPU: 6TOPs, supports INT4/INT8/INT16/FP16 |
commit | commitdiff | tree |
| 2024-08-24 | xiaobo tian | rockchip: add support for nanopc t6 NPU: 6TOPs, supports INT4/INT8/INT16/FP16 |
commit | commitdiff | tree |
| 2024-08-19 | Mark Mentovai | failsafe: fix console failsafe shell ...appropriate for serial consoles, "vt102", as used for ...by busybox init. This "linux"/"vt102" TERM setting is |
commit | commitdiff | tree |
| 2024-08-16 | Felix Fietkau | mt76: update to Git HEAD (2024-08-16) ...wifi: mt76: mt7996: use hweight16 to get correct tx antenna |
commit | commitdiff | tree |
| 2024-06-30 | David Bauer | hostapd: don't ignore probe-requests with invalid DSSS... dot11RadioMeasurementActivated is set... dot11RadioMeasurementActivated set... |
commit | commitdiff | tree |
| 2024-06-30 | Robert Marko | ipq40xx: habanero-dvk: fix LAN MAC adresses happening via the ethernet1 alias so U-Boot does it, previously... |
commit | commitdiff | tree |
| 2024-06-08 | Tony Ambardar | kexec-tools: fix multiple compile errors ...sscanf(basename(sysfs_name), "int13_dev%hhx", &devnum) != 1) { ...sscanf(basename(sysfs_name), "int13_dev%hhx", &devnum) != 1) { |
commit | commitdiff | tree |
| 2024-06-07 | Roman Azarenko | build: add explicit timezone in CycloneDX SBOM 2024-06-03T15:51:10 ...metadata.timestamp: 2024-06-03T15:51:10 is an invalid date-time" |
commit | commitdiff | tree |
| 2024-05-16 | Paweł Owoc | qualcommax: ipq807x: add support for Linksys MX8500 ...boot_part = 1; then run bootpart1; else run bootpart2; fi' ...boot_part = 1; then run bootpart1; else run bootpart2; fi' ...boot_part = 1; then run bootpart1; else run bootpart2; fi' |
commit | commitdiff | tree |
| 2024-05-07 | Stijn Tintel | realtek/rtl839x: respect phy-is-integrated property SG2452P/T1600G-52PS), use PHYs at a different... |
commit | commitdiff | tree |
| 2024-04-12 | Paul Donald | mediatek: mt7622: rtl8367c: source comment fixes port8~port10的设置在另外一个register -> port8~port10 setup is done in a separate register |
commit | commitdiff | tree |
| 2024-03-23 | Steffen Loley | ramips: add support for TP-Link RE205 v3 - 2T2R 2.4 GHz and 1T1R 5 GHz |
commit | commitdiff | tree |
| 2024-03-13 | Jean Thomas | mediatek: mt7981: pinctrl: add additional uart group Add uart1_3 (pins 26, 27) group to the pinctrl... |
commit | commitdiff | tree |
| 2024-03-08 | INAGAKI Hiroshi | ath79: cleanup and enable uart1 on ELECOM WAB-I1750-PS ath79: cleanup and enable uart1 on ELECOM WAB-I1750-PS Cleanup uart1-related node on ELECOM WAB-I1750... |
commit | commitdiff | tree |
| 2024-03-08 | INAGAKI Hiroshi | ath79: add aliases to qca955x.dtsi for uart0/1 qca955x.dtsi, to enable uart1 on Linux Kernel. |
commit | commitdiff | tree |
| 2024-03-08 | INAGAKI Hiroshi | ath79: add HighSpeed UART (uart1) support for QCA955x ath79: add HighSpeed UART (uart1) support for QCA955x (uart1). This UART is compatible with... |
commit | commitdiff | tree |
| 2024-03-08 | INAGAKI Hiroshi | ath79: rename label of primary UART on QCA955x to ... UART (uart1) support. |
commit | commitdiff | tree |
| 2024-02-24 | Mieczyslaw Nalewaj | kernel: support for RTL8367C/S switch SGMII/HSGMII mode for EXT1 is not implemented for the sake... |
commit | commitdiff | tree |
| 2024-02-23 | Marcin Gajda | ipq40xx: Add support Netgear LBR20 - There are two Torx T10 screws under the label next to... - PCB is screwed with 4Pcs of Torx T10 screws |
commit | commitdiff | tree |
| 2024-02-23 | Paweł Owoc | qualcommax: ipq807x: add support for Linksys MX5300 ...boot_part = 1; then run bootpart1; else run bootpart2; fi' |
commit | commitdiff | tree |
| 2024-02-18 | Daniel Golle | kernel: nvmem: correctly assign fwnode to MMC block... mmcblk0boot1 will not work without this change. |
commit | commitdiff | tree |
| 2024-02-15 | Daniel Golle | mediatek: filogic: add BananaPi BPi-R3 mini ...PHY firmware to /dev/mmcblk0boot1: echo 0 > /sys/block/mmcblk0boot1/force_ro ...EthMD32.dm.bin of=/dev/mmcblk0boot1 ...16384 seek=1 of=/dev/mmcblk0boot1 |
commit | commitdiff | tree |
| 2024-02-15 | Daniel Golle | uboot-mediatek: add builds for BananaPi BPi-R3 mini ...UBI volume en8811h-fw or MMC boot1 hardware partition. |
commit | commitdiff | tree |
| 2024-02-15 | Daniel Golle | mediatek: dts: mt7988: add uart1 and uart2 mediatek: dts: mt7988: add uart1 and uart2 Add device tree nodes for uart1 and uart2 of the MT7988 SoC. |
commit | commitdiff | tree |
| 2024-02-15 | Daniel Golle | mediatek: pinctrl-mt7988: add additional uart1_2_lite... ...pinctrl-mt7988: add additional uart1_2_lite group ...using only pins 80 and 81 for uart1. |
commit | commitdiff | tree |
| 2024-02-11 | Christian Marangi | qualcommax: fix wrong PHY node definition for Buffalo... - Drop ESS_PORT1 as it's not actually attached... |
commit | commitdiff | tree |
| 2024-01-24 | Linus Walleij | bmips: bcm6368-enetsw: Bump max MTU eth0 ext1 enp7s0 ifconfig ext1 mtu 1506 An MTU of 1506 on ext1 is a logic consequence of the... |
commit | commitdiff | tree |
| 2024-01-09 | Felix Fietkau | mac80211: do not emit VHT160 capabilities if channel... mac80211: do not emit VHT160 capabilities if channel width... Fixes compatibility issues with VHT160 capable clients |
commit | commitdiff | tree |
| 2023-12-10 | Daniel Golle | mediatek: add support for Adtran SmartRG Bonanza Peak... 3. run boot1 |
commit | commitdiff | tree |
| 2023-11-25 | Valerio 'ftp21'... | mediatek: add Zyxel EX5601-T0 with uboot custom partition In this instance the PCIe and the uart1 and uart2 are disabled. UART1 seems to be used as a flash port... |
commit | commitdiff | tree |
| 2023-11-25 | Mikhail Zhilkin | ramips: add support for Sercomm CPJ routers Option 1. Restore firmware Slot1 from a backup (firmware2.bin): take Slot1 parts (kernel2.bin, rootfs2.bin... |
commit | commitdiff | tree |
| 2023-11-15 | Christian Marangi | scripts/dump-target-info.pl: add new function to DUMP... ...DEVICE NAME" "ALT0 DEVICE NAME" "ALT1 DEVICE NAME" ... |
commit | commitdiff | tree |
| 2023-11-13 | Christian Marangi | qca-ssdk: fix unsupported scenario with PORT1 not declared... ...fix unsupported scenario with PORT1 not declared in switch bmp ...malibu first PHY referring port1 on a different PHY addres results in PORT1 PORT2 PORT3 PORT4 present) or... ...even exotic configuration with PORT1 not PORT1 declared in any of the bitmap. ...that coincidentally is always PORT1. PORT1 addr is 0x0. The entire code in... Declaring a bitmap where the PORT1 is missing (or worse PORT4 the... |
commit | commitdiff | tree |
| 2023-11-13 | Christian Marangi | Revert "qca-ssdk: fix unsupported scenario with PORT1... ...fix unsupported scenario with PORT1 not declared in switch bmp" |
commit | commitdiff | tree |
| 2023-11-11 | Christian Marangi | qca-ssdk: fix unsupported scenario with PORT1 not declared... ...fix unsupported scenario with PORT1 not declared in switch bmp results in PORT1 PORT2 PORT3 PORT4 present) or... ...even exotic configuration with PORT1 not PORT1 declared in any of the bitmap. ...that coincidentally is always PORT1. PORT1 addr is 0x0. The entire code in... Declaring a bitmap where the PORT1 is missing (or worse PORT4 the... |
commit | commitdiff | tree |
| 2023-11-03 | Lech Perczak | ath79: support Fortinet FAP-220-B ...fwconcat0", "loader", and "fwconcat1" ...cat /dev/mtd3 > /tmp/mtd3_fwconcat1.bin # mtd write /tmp/mtd3_fwconcat1.bin fwconcat1 |
commit | commitdiff | tree |
| 2023-11-02 | Koen Vandeputte | ath10k-ct: bump to latest upstream 92900bf("at10k-ct: fixup version info") |
commit | commitdiff | tree |
| 2023-10-20 | Andreas Böhler | realtek: add support for TP-Link T1600G-28TS v3 realtek: add support for TP-Link T1600G-28TS v3 |
commit | commitdiff | tree |
| 2023-09-25 | Glen Lee | ipq40xx: add support for Extreme Networks WS-AP391x... Senao EXT1025 HD Camera (AP3916 only) |
commit | commitdiff | tree |
| 2023-09-17 | Max Qian | ramips: RT1800: fix invalid octal number error ramips: RT1800: fix invalid octal number error |
commit | commitdiff | tree |
| 2023-08-19 | Andreas Böhler | ipq4019: add support for ZTE MF287 Pro aka DreiNeo Pro LTE: ZTE Cat12 |
commit | commitdiff | tree |
| 2023-08-02 | Stefan Kalscheuer | mvebu: add kernel 6.1 as testing kernel Run-tested on the cortexa9 subtarget (WRT1900ACS, Turris Omnia) |
commit | commitdiff | tree |
| 2023-07-14 | Felix Fietkau | mt76: update to the latest version bb3937d5c3e0 wifi: mt76: mt7915: remove VHT160 capability on MT7915 |
commit | commitdiff | tree |
| 2023-07-02 | Sander Vanheule | ramips: mt7621: add TP-Link EAP613 v1 ...Two stamped metal antennas (ANT1, ANT2) |
commit | commitdiff | tree |
| 2023-07-01 | Joao Henrique Albuqu... | ath79: add support for COMFAST CF-E380AC v2 - UART (T11), LEDs/GPIO (J7) and USB (T12... |
commit | commitdiff | tree |
| 2023-06-25 | Andreas Böhler | ipq4019: add support for ZTE MF287+ aka DreiNeo LTE: ZTE Cat12 (MF287+) / ZTE Cat6 (MF287) |
commit | commitdiff | tree |
| 2023-05-14 | Christian Marangi | kernel: ltq-vdsl-vr9: fix multiple compilation warning 3359 | DSL_uint16_t nMsgId = EVT_PMD_TESTPARAMSGET; |
commit | commitdiff | tree |
| 2023-04-17 | Oleksandr Zharov | ramips: add Xiaomi RA75 red signal led ...Deisenhofer. GPIO46 is used for UART1 by |
commit | commitdiff | tree |
| 2023-04-07 | Eneas U de Queiroz | openssl: fix CVE-2023-464 and CVE-2023-465 `X509_VERIFY_PARAM_set1_policies()' function. `X509_VERIFY_PARAM_set1_policies()' function. |
commit | commitdiff | tree |
| 2023-04-03 | David Bauer | Revert "mpc85xx: remove Watchguard T10 MAC override" Revert "mpc85xx: remove Watchguard T10 MAC override" |
commit | commitdiff | tree |
| 2023-03-22 | Lech Perczak | ath79: support Ruckus ZoneFlex 7351 ...server, and removing a single T10 screw. |
commit | commitdiff | tree |
| 2023-03-20 | David Bauer | mpc85xx: remove Watchguard T10 MAC override mpc85xx: remove Watchguard T10 MAC override ...the readout for the Watchguard T10 |
commit | commitdiff | tree |
| 2023-03-07 | David Bauer | mpc85xx: add support for Watchguard Firebox T10 ...support for Watchguard Firebox T10 https://github.com/blocktrron/t10-uboot-patcher/ ...ethernet port 0 of the Watchguard T10. ...sysupgrade image to the Watchguard T10 using Note: The LAN ports of the T10 are 1 & 2 while 0 is WAN. You... |
commit | commitdiff | tree |
| 2023-01-24 | Lorenz Brun | realtek: dsa: support active-high LEDs The TP-LINK TL-ST1008F has active-high LEDs, so we... |
commit | commitdiff | tree |
| 2023-01-08 | Arınç ÜNAL | ramips: do not use GPIO function on switch pins on... mt7621_belkin_rt1800.dts: There's only one LED which... |
commit | commitdiff | tree |
| 2023-01-07 | Sebastian Schaper | ramips: add support for D-Link DAP-X1860 A1 -out FWImage.st1 -k MB0dBx62oXJXDvt12lETWQ== - tar -xvf FWImage.st1 |
commit | commitdiff | tree |
| 2023-01-06 | Michael Pratt | ath79: add support for Fortinet FAP-221-B "fwconcat0", "loader", and "fwconcat1" |
commit | commitdiff | tree |
| 2022-11-13 | Lech Perczak | ath79: support Ruckus ZoneFlex 7025 ...server, and removing a single T10 screw, fwconcat0 and fwconcat1 MTD partitions, or restore backup... |
commit | commitdiff | tree |
| 2022-11-13 | Martin Dziura | ramips: glinet_gl-mt300n-v2: allow to use I2C and UART1... ...mt300n-v2: allow to use I2C and UART1 pins as GPIO |
commit | commitdiff | tree |
| 2022-11-13 | Sven Eckelmann | ipq40xx: Convert plasmacloud,pa2200 to DSA * ethernet1: |
commit | commitdiff | tree |
| 2022-11-13 | Sven Eckelmann | ipq40xx: Convert plasmacloud,pa1200 to DSA * ethernet1: |
commit | commitdiff | tree |
| 2022-11-13 | Arne Zachlod | ramips: fix MAC address assignment for rt1800, e7350 ...fix MAC address assignment for rt1800, e7350 assignment for belkin,rt1800 and linksys,e7350. |
commit | commitdiff | tree |
| 2022-11-12 | Sven Eckelmann | ipq40xx: Convert openmesh,a62 to DSA * ethernet1: |
commit | commitdiff | tree |
| 2022-11-12 | Sven Eckelmann | ipq40xx: Convert openmesh,a42 to DSA * ethernet1: |
commit | commitdiff | tree |
| 2022-11-07 | Michael Lyle | ramips: gl-mt1300: downclock SPI to 50MHz ramips: gl-mt1300: downclock SPI to 50MHz |
commit | commitdiff | tree |
| 2022-10-13 | Huangbin Zhan | build: image: use printf for ModelNameLimit16 ...image: use printf for ModelNameLimit16 define ModelNameLimit16 define ModelNameLimit16_2 echo $(call ModelNameLimit16, technicolor_tg582n-telecom-italia) echo $(call ModelNameLimit16_2, technicolor_tg582n-telecom... |
commit | commitdiff | tree |
| 2022-10-11 | Christian Marangi | ipq806x: 5.15: add boot-partitions binding to fix block... <offset1 size1 offset2 size2 offset3 ...> |
commit | commitdiff | tree |
| 2022-09-24 | Giammarco Marzano | ipq40xx: Add ZTE MF289F AT1 = QCA9984 5Ghz Radio on PCI-E bus (QCA9984): a/n/ac, 4x4 HW REV AT1 |
commit | commitdiff | tree |
| 2022-09-24 | INAGAKI Hiroshi | ipq40xx: add support for Sony NCP-HG100/Cellular [ 1.537831] mmcblk0boot1: mmc0:0001 004GA0 partition 2... |
commit | commitdiff | tree |
| 2022-09-19 | David Bauer | hostapd: update to 2022-07-29 ...vs. 160 part from wpa2_ocv_ap_vht160_mismatch |
commit | commitdiff | tree |
| 2022-09-13 | Rosen Penev | mt7621: fix Belkin RT1800 GPIO mt7621: fix Belkin RT1800 GPIO ...ramips: add support for Belkin RT1800") |
commit | commitdiff | tree |
| 2022-09-11 | Nick French | ath79: add support for TP-Link Deco S4 3. Connect pc to router ethernet port1 |
commit | commitdiff | tree |
| 2022-09-10 | Lech Perczak | ath79: support Ruckus ZoneFlex 7321 ...server, and removing a single T10 screw, 1F7PQzivmzbcLpYftmfH87G56Wz+/v18sT1r19vu649dqi/2qaqns0W4utmelalPm27I... fwconcat0 and fwconcat1 MTD partitions, or restore backup... |
commit | commitdiff | tree |
| 2022-09-10 | Lech Perczak | ath79: support Ruckus ZoneFlex 7372 ...server, and removing a single T10 screw, fwconcat0 and fwconcat1 MTD partitions, or restore backup... |
commit | commitdiff | tree |
| next | |||