mt76: update to Git HEAD (2024-03-18) a903d3169193 wifi: mt76: mt7921: fix a potential association failure upon resuming eb0d0ce344f3 wifi: mt76: mt7921: fix suspend issue on MediaTek COB platform 841bf82e9958 wifi: mt76: fix the issue of missing txpwr settings from ch153 to ch177 ce7ccc540168 wifi: mt76: Remove redundant assignment to variable tidno a238df940d6f wifi: mt76: mt7915: initialize rssi on adding stations 46c7d1849dbd wifi: mt76: replace skb_put with skb_put_zero b5640b3153c7 wifi: mt76: fix tx packet loss when scanning on DBDC 7b054e5cb3af wifi: mt76: mt7915: fix mcu command format for mt7915 tx stats 3f27a64a8010 wifi: mt76: mt7915: fix bogus Tx/Rx airtime duration values 4f681a8fbc91 wifi: mt76: mt7915: fix HE PHY capabilities IE for station mode 8ede229eb8b5 wifi: mt76: mt7915: only set MT76_MCU_RESET for the main phy 2330781b8c5f wifi: mt76: mt7996: only set MT76_MCU_RESET for the main phy e5fb6995e7eb wifi: mt76: mt7915: add support for disabling in-band discovery b4a917417c85 wifi: mt76: mt7915: add mt7986, mt7916 and mt7981 pre-calibration 2135e201e7a9 mt76: mt7915: add fallback in case of missing precal data Signed-off-by: Felix Fietkau <nbd@nbd.name>
kirkwood: add support for Netgear Stora (MS2000/2110) NAS Dual-slot NAS based on Marvell Kirkwood. Specifications: - Marvell 88F6281 @1GHz - 128Mb RAM - 256Mb NAND - 1x GbE LAN (Marvell 88E1116) - 1x USB 2.0 - 2x SATA - PCF8563 RTC - LM75 sensor - TC654 PWM fan controller - Serial on J2 (115200,8n1) - Newer bootROM so kwboot-ing via serial is possible Installation: 1. Serial console - Connect your levelshifter to the serial console on J2 (refer to the wiki page for pinout) 2. Update u-boot - Download the u-boot.kwb image for the device - Powercycle the NAS - Run "kwboot -b ./u-boot.kwb /dev/ttyUSB0 -p" - Connect to the serial console with minicom - tftp 0x0800000 netgear_stora-u-boot.kwb - nand erase 0x0 100000 - nand write 0x0800000 0x0 0x100000 - reset 3. Install OpenWrt - Boot up the initramfs image - tftpboot 0x800000 openwrt-kirkwood-netgear_stora-initramfs-uImage; bootm 0x800000 - Download the sysupgrade image and perform sysupgrade The fan is controlled in 3 stages by a script running every minute from cron, measuring the CPU temperature. Snippets taken from bodhi <mibodhi@gmail.com> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
ds-lite: Add support for IPIP6(RFC2473) tunnel Add Generic Packet Tunneling in IPv6 Specification (RFC 2473) support. Signed-off-by: Arayuki Mago <ms@missing233.com> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
mac80211: fix another regression in the broadcast AQL patch Add a separate bit in struct ieee80211_tx_info to indicate airtime tracked as broadcast/multicast. This avoids a race condition where airtime from stations that were just removed wasn't getting subtracted from the total PHY airtime. Fixes: 95e633efbd1b ("mac80211: add AQL support for broadcast/multicast packets") Signed-off-by: Felix Fietkau <nbd@nbd.name>
kernel: modules: video: select drm-exec and drm-suballoc-helper for AMDGPU drm-amdgpu and drm-radeon require drm-exec and/or drm-suballoc-helper in 6.6, so since we have them packaged separately include them when required. Fixes: 5b08b5600720 ("kernel: modules: video: adapt for kernel 6.6") Signed-off-by: Robert Marko <robimarko@gmail.com>
kernel: modules: video: package DRM suballocation helper Linux 6.4 has split out the previously AMDGPU specific suballocation helper into a generic one and it has its own symbol now. So, lets package it as a separate helper as AMDGPU still requires it for 6.6. Signed-off-by: Robert Marko <robimarko@gmail.com>
kernel: modules: video: drm: remove DRM_EXEC and DRM_SUBALLOC_HELPER As part of adding kernel 6.6 support, DRM_EXEC and DRM_SUBALLOC_HELPER were added to the kmod-drm, however these are only used by drm-amdgpu and drm-radeon which are only supported on x86. So, lets start fixing building of other targets by removing these from the main kmod-drm, in follow-up commits they will be packaged separately and selected when required. Fixes: 5b08b5600720 ("kernel: modules: video: adapt for kernel 6.6") Signed-off-by: Robert Marko <robimarko@gmail.com>
ath11k-firmware: update IPQ8074 and QCN9074 to 2.9.0.1-01977 After a long time QCA has pushed an updated release of 2.9.0.1 firmware for IPQ8074 and QCN9074, so lets update to 2.9.0.1-01977. Sadly, still nothing new for IPQ6018. Signed-off-by: Robert Marko <robimarko@gmail.com>
kernel: kmod-video-cpia2: Depend on kernel 5.15 This driver was moved to staging in kernel 6.1 and then removed in kernel 6.3, see these commits: https://git.kernel.org/linus/be8cebc46d9d38166a1b3fda22a018ae52b0928e https://git.kernel.org/linus/9ea8a9c72a9b4d24e6045ee25f5e465dc22f9f55 Build it only on older kernel versions. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
kernel: kmod-can: Fix build of can drivers Many can kernel modules are now gated by the newly introduced CONFIG_CAN_NETLINK configuration option. Activate it to build the can drivers again. This was changed in this upstream Linux commit: https://git.kernel.org/linus/df6ad5dd838e0fa543ca28ca6154901fa65a9443 This should fix these warnings with kernel 6.1 and 6.6: logs/package/kernel/linux/compile.txt:WARNING: kmod-can-c-can is not available in the kernel config - generating empty package logs/package/kernel/linux/compile.txt:WARNING: kmod-can-c-can-pci is not available in the kernel config - generating empty package logs/package/kernel/linux/compile.txt:WARNING: kmod-can-c-can-platform is not available in the kernel config - generating empty package logs/package/kernel/linux/compile.txt:WARNING: kmod-can-mcp251x is not available in the kernel config - generating empty package logs/package/kernel/linux/compile.txt:WARNING: kmod-can-slcan is not available in the kernel config - generating empty package logs/package/kernel/linux/compile.txt:WARNING: kmod-can-usb-8dev is not available in the kernel config - generating empty package logs/package/kernel/linux/compile.txt:WARNING: kmod-can-usb-ems is not available in the kernel config - generating empty package logs/package/kernel/linux/compile.txt:WARNING: kmod-can-usb-kvaser is not available in the kernel config - generating empty package logs/package/kernel/linux/compile.txt:WARNING: kmod-can-usb-peak is not available in the kernel config - generating empty package Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
kernel: kmod-can-flexcan: Fix flexcan.ko location The flexcan.ko file was moved in upstream Linux: https://git.kernel.org/linus/bfd00e021cf162049946a9e0047b0997d2b35fec This fixes the build with kernel >= 5.17. This module was never build with kernel 6.1 before. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
kernel: kmod-can-slcan: Fix can-slcan.ko location The slcan.ko file was moved in upstream Linux: https://git.kernel.org/linus/98b12064591d635db86da4957b547067dc6897cc This fixes the build with kernel >= 6.0. This module was never build with kernel 6.1 before. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>