package: layerscape: change loadaddr address At this moment loadaddr in most layerscape boards are configured to 0x81000000. 5.15 kernel on some boards is bigger than 5.10 and it cause error: Loading kernel from FIT Image at 81000000 ... Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: ARM64 OpenWrt Linux-5.15.112 Created: 2023-05-21 17:39:35 UTC Type: Kernel Image Compression: gzip compressed Data Start: 0x810000ec Data Size: 7513944 Bytes = 7.2 MiB Architecture: AArch64 OS: Linux Load Address: 0x80000000 Entry Point: 0x80000000 Hash algo: crc32 Hash value: 6fd69550 Hash algo: sha1 Hash value: ee34c753ffb615e199a428762824ad4a0aaef90a Verifying Hash Integrity ... crc32+ sha1+ OK Loading fdt from FIT Image at 81000000 ... Using 'config-1' configuration Trying 'fdt-1' fdt subimage Description: ARM64 OpenWrt fsl_ls1088a-rdb-sdboot device tree blob Created: 2023-05-21 17:39:35 UTC Type: Flat Device Tree Compression: uncompressed Data Start: 0x8172a98c Data Size: 19794 Bytes = 19.3 KiB Architecture: AArch64 Hash algo: crc32 Hash value: 59792ba3 Hash algo: sha1 Hash value: 135585a49f86cd85acea559b78b0098ae99d5e12 Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x8172a98c Uncompressing Kernel Image ERROR: new format image overwritten - must RESET the board to recover resetting ... This patch changes loadaddr to 0x88000000 (like LS1012A-FRDM board) to avoid overlapping for bigger images (like initramfs) too. Tested-by: Alexandra Alth <alexandra@alth.de> [LS1088ARDB] Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
uboot-layerscape: Bump to lf-6.1.1-1.0.0 and switch to github The default location of uboot-layerscape has been changed from codeuaurora to github. Also use the latest tag for Layerscape Linux Development POC from NXP. Tested on: * NXP FRWY-LS1012A * NXP LS1028A-RDB * NXP LS1046A-RDB V2: Remove ls1028ardb specifix fixups not needed with new uboot Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch> (reset PKG_RELEASE) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
treewide: replace AUTORELEASE with real PKG_RELEASE Based on Paul Fertser <fercerpav@gmail.com>'s guidance: Change AUTORELEASE in rules.mk to: ``` AUTORELEASE = $(if $(DUMP),0,$(shell sed -i "s/\$$(AUTORELEASE)/$(call commitcount,1)/" $(CURDIR)/Makefile)) ``` then update all affected packages by: ``` for i in $(git grep -l PKG_RELEASE:=.*AUTORELEASE | sed 's^.*/\([^/]*\)/Makefile^\1^';); do make package/$i/clean done ``` Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
uboot-layerscape: Add ls1028ardb support Support uboot for NXP LS1028ARDB reference board. GIC V3 has to be disabled in the uboot config to allow booting upstream kernels. This patch can be dropped once uboot is updated to 2022.04 version to nxp-qoriq github lf-6.1.1 branch. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
uboot-layerscape: Don't fixup kaslr seed when no node There seems to be a difference in firmware calling convention between upstream and NXP kernels. On some cpus like ls1028 it will hang on firmware secure get random when using LF uboot with upstream kernel. Instead of commenting it out, don't call get radnom seed when "kaslr-seed" is not present in device tree. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
layerscape: Switch LS1012A-FRDM initramfs to gzip At this moment LS1012A-FRDM have uncompressed initramfs image. Error was caused, because gzip extract area overlap image. Let's change loadaddr and enable gzip initramfs images again. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
uboot-layerscape: adjust LS1012A-IOT config and env In a254279a6c30 LS1012A-IOT kernel image was switched to FIT. But u-boot config is lack of FIT and ext4 support. This patch enables it. It also fix envs, because for some reason this board need to use "loadaddr" variable in brackets. Fixes: #9894 Fixes: a254279a6c30 ("layerscape: Change to combined rootfs on sd images") Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
uboot-layerscape: update PKG_HASH The change of the PKG_VERSION caused the hash of the package to change. This is because the PKG_VERSION is present in the internal directory structure of the uboot-layerscape-21.08.tar.xz archive. i.e: # tar tf uboot-layerscape-21.08.tar.xz: uboot-layerscape-21.08/ uboot-layerscape-21.08/.azure-pipelines.yml uboot-layerscape-21.08/.checkpatch.conf uboot-layerscape-21.08/.gitattributes uboot-layerscape-21.08/.github/ [...] vs. # tar tf uboot-layerscape-LSDK-21.08.tar.xz uboot-layerscape-LSDK-21.08/ uboot-layerscape-LSDK-21.08/.azure-pipelines.yml uboot-layerscape-LSDK-21.08/.checkpatch.conf uboot-layerscape-LSDK-21.08/.gitattributes uboot-layerscape-LSDK-21.08/.github/ [...] the (file) content of both archives are otherwise the same. The PKG_HASH was taken from the builder log: | Hash of the local file uboot-layerscape-21.08.tar.xz does not match |(file: 54909a98bdcc26c7f9b35b35fcae09b977ecbf044be7bffa6dad9306c47cccf6, |requested: 874e871755ef84ebbf3[...]) - deleting download. without this update, the uboot-layerscape-21.08 package would always try to download (from git), repacked the archive and reupload to sources.openwrt.org (~14 MiB saved). Fixes: 038d5bdab117 ("layerscape: use semantic versions for LSDK") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
uboot-layerscape: bump to LSDK-21.08 Update layerscape u-boot package to LSDK-21.08 and drop patches which are no longer needed. The new env variable 'fsl_bootcmd_mcinitcmd_set' is needed to protect the configured bootcmd and mc_init values. See [1] for more informations. [1] https://source.denx.de/u-boot/u-boot/-/commit/b62c174e861bddc3c7131045ed018556645cecb9 Signed-off-by: Martin Schiller <ms@dev.tdt.de>
layerscape: add LX2160ARDB (Rev2.0 silicon) board support The QorIQ LX2160A reference design board provides a comprehensive platform that enables design and evaluation of the LX2160A processor. - Enables network intelligence with the next generation Datapath (DPPA2) which provides differentiated offload and a rich set of IO, including 10GE, 25GE, 40GE, and PCIe Gen4 - Delivers unprecedented efficiency and new virtualized networks - Supports designs in 5G packet processing, network function virtualization, storage controller, white box switching, network interface cards, and mobile edge computing - Supports all three LX2 family members (16-core LX2160A; 12-core LX2120A; and 8-core LX2080A) Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [use AUTORELEASE, add dtb to firmware part] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
layerscape: add FRWY-LS1046A board support The LS1046A Freeway board (FRWY) is a high-performance computing, evaluation, and development platform that supports the QorIQ LS1046A architecture processor capable of support more than 32,000 CoreMark performance. The FRWY-LS1046A board supports the QorIQ LS1046A processor, onboard DDR4 memory, multiple Gigabit Ethernet, USB3.0 and M2_Type_E interfaces for Wi-Fi. The FRWY-LS1046A-TP includes the Coral Tensor Flow Processing Unit that offloads AI/ML inferencing from the CPU to provide significant boost for AI/ML applications. The FRWY-LS1046A-TP includes one M.2 TPU module and more modules can easily be added including USB versions of the module to scale the AI/ML performance. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [rebase, use AUTORELEASE, fix sorting, add dtb to firmware part] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
layerscape: make initramfs kernel fit packed This will make developing process easier, because dtb will be included into image. Not need to enable initramfs image by default. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
layerscape: update u-boot to LSDK-20.04-update-290520 Update u-boot to LSDK-20.04-update-290520. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [fix PKG_RELEASE bump] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
layerscape: Change to combined rootfs on sd images At this moment layerscape images are ext4 only. It causes problem with save changes durring sysupgrade and make "firstboot" and failsafe mode useless. This patch changes sd-card images to squashfs + f2fs combined images. To make place, for saving config, kernel space ar now ext4 partition with fit kernel. This method of image generation is similar to rest of OpenWrt sd-card targets. Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [reword README, reword DEVICE_COMPAT_MESSAGE, keep original indent] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
layerscape: add dtb to sysupgrade At this moment sysupgrade replaces only kernel and rootfs. This patch add dtb part to sysupgrade images to avoid situation when old dtb make system broken. Is possible to sysupgrade older images for NOR devices: 1. Firmware partition in bootargs need to be updated to: "49m@0xf00000(firmware)". Env should be saved after changes. 2. After step one, "sysupgrade -F" will work. Run tested: LS1046A-RDB Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [bump PKG_RELEASE for uboot-layerscape] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
uboot-layerscape: fix LS1012A-FRDM fdt_high value LS1012A-FRDM have configured wrong fdt_high value. That causes impossibility of booting. This patch fix it. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com> [bump PKG_RELEASE] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
layerscape: harmonize device strings OpenWrt lately has harmonized device (definition) names to the pattern vendor_model to improve overall consistency, also with other values like the DTS compatible. This patch applies that scheme to the layerscape target. Since this (intentionally) creates a bigger overlap between DTS names, compatible, and device definition name, it also moves DEVICE_DTS and SUPPORTED_DEVICES definitions to the Device/Default blocks. Apart from that, it also modifies several packages to use consistent naming in order to keep the $(1) file references working. While at it, remove one layer of complexity for the setup in tfa-layerscape package. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
layerscape: support sysupgrade for squashfs rootfs Support sysupgrade for all Layerscape boards with squashfs rootfs. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>