ixp4xx: add Generic subtarget definition Add Generic subtarget definition. This is needed to keep consistent name on every other target/subtarget and also to permit correct work of CI workflows that expect a target/subtarget pattern. Fixes: c16b2293fe71 ("ixp4xx: Resurrect IXP4xx support using device tree") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
kernel: bump 6.1 to 6.1.64 Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.64 Removed upstreamed: ixp4xx/patches-6.1/0001-mtd-cfi_cmdset_0001-Byte-swap-OTP-info.patch[1] mvebu/patches-6.1/106-Revert-i2c-pxa-move-to-generic-GPIO-recovery.patch[2] qualcommax/patches-6.1/0026-v6.7-clk-qcom-ipq8074-drop-the-CLK_SET_RATE_PARENT-flag-f.patch[3] Manually rebased: bcm27xx/patches-6.1/950-0111-MMC-added-alternative-MMC-driver.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.64&id=3b93096d29c5b9ca2af94be4ee9949c1767acf17 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.64&id=b3fd9db79e30d5eb5f76ef1f5b7e4f444af574ea 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.64&id=877080a3490102da26b8d969588159b2385f739e Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
kernel: bump 6.1 to 6.1.63 Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.63 Removed upstreamed: generic/backport-6.1/815-v6.6-2-leds-turris-omnia-Drop-unnecessary-mutex-locking.patch generic/backport-6.1/815-v6.7-1-leds-turris-omnia-Do-not-use-SMBUS-calls.patch ixp4xx/patches-6.1/0007-watchdog-ixp4xx-Make-sure-restart-always-works.patch Manually rebased: bcm27xx/patches-6.1/950-0606-hwrng-bcm2835-sleep-more-intelligently.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.63&id=7d0e60e4ff840e97fb18afb2a7344442c10a6fdf 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.63&id=63cdeb20ee3bfef820b045b8d3b8395f9f815a74 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.63&id=8803da01fe1b4ca3d37745283f7e73c6c2558c0c Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me>
ixp4xx: Add USRobotics USR8200 support This brings back USRobotics USR8200 support to the IXP4xx target. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
ixp4xx: remove unmaintained target This target is still on kernel 4.9, and it looks like there is no active maintainer for this target anymore. Remove the code and all the packages which are only used by this target. To add this target to OpenWrt again port it to a recent and supported kernel version. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
treewide: remove kmod-usb-core from DEVICE_PACKAGES This removes _all_ occurrences of kmod-usb-core from DEVICE_PACKAGES and similar variables. This package is pulled as dependency by one of the following packages in any case: - kmod-usb-chipidea - kmod-usb-dwc2 - kmod-usb-ledtrig-usbport - kmod-usb-ohci - kmod-usb2 - kmod-usb2-pci - kmod-usb3 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> [remove kmod-usb-core from EnGenius ESR600] Signed-off-by: David Bauer <mail@david-bauer.net>
treewide: sysupgrade: use $UPGRADE_BACKUP to check for backup Now that $UPGRADE_BACKUP is set conditionally there is no need to check the $UPGRADE_OPT_SAVE_CONFIG anymore. All conditions can be simplified. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
treewide: use new procd sysupgrade $UPGRADE_BACKUP variable It's a variable set by procd that should replace hardcoded /tmp/sysupgrade.tgz. This change requires the most recent procd with the commit 0f3c136 ("sysupgrade: set UPGRADE_BACKUP env variable"). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
treewide: replace remaining (not working now) $SAVE_CONFIG uses This var has been replaced by the $UPGRADE_OPT_UPGRADE_OPT_SAVE_CONFIG Fixes: b534ba961100 ("base-files: pass "save_config" option to the "sysupgrade" method") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
kernel: bump 4.9 to 4.9.154 Refreshed all patches. Adapted patches: - 012-kbuild-add-macro-for-controlling-warnings-to-linux-c.patch Compile-tested on: ar7 Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>