add wl-500gx to hardware documentation dir (files from Josephus)
[openwrt/openwrt.git] / openwrt / docs / hardware / asus / wl-500gx / dmesg-2_4_29.txt
1 CPU revision is: 00029007
2 Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
3 Primary data cache 4kB, 2-way, linesize 16 bytes.
4 Linux version 2.4.29 (root@reboot2.lan) (gcc version 3.3.5) #1 Mon Mar 28 22:34:14 EST 2005
5 Determined physical RAM map:
6 memory: 02000000 @ 00000000 (usable)
7 On node 0 totalpages: 8192
8 zone(0): 8192 pages.
9 zone(1): 0 pages.
10 zone(2): 0 pages.
11 Kernel command line: root=/dev/mtdblock2 init=/etc/preinit noinitrd console=ttyS0,115200
12 CPU: BCM5365 rev 1 at 200 MHz
13 Using 100.000 MHz high precision timer.
14 Calibrating delay loop... 199.47 BogoMIPS
15 Memory: 30296k/32768k available (1469k kernel code, 2472k reserved, 104k data, 88k init, 0k highmem)
16 Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
17 Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
18 Mount cache hash table entries: 512 (order: 0, 4096 bytes)
19 Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
20 Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
21 Checking for 'wait' instruction... unavailable.
22 POSIX conformance testing by UNIFIX
23 PCI: Fixing up bus 0
24 PCI: Fixing up bridge
25 PCI: Setting latency timer of device 01:00.0 to 64
26 PCI: Fixing up bus 1
27 Linux NET4.0 for Linux 2.4
28 Based upon Swansea University Computer Society NET3.039
29 Initializing RT netlink socket
30 Starting kswapd
31 devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
32 devfs: boot_options: 0x1
33 JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
34 Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
35 pty: 256 Unix98 ptys configured
36 Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
37 ttyS00 at 0xb8000300 (irq = 3) is a 16550A
38 ttyS01 at 0xb8000400 (irq = 0) is a 16550A
39 Software Watchdog Timer: 0.05, timer margin: 60 sec
40 loop: loaded (max 8 devices)
41 Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
42 Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
43 Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
44 Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
45 Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
46 Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
47 Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
48 Amd/Fujitsu Extended Query Table v1.1 at 0x0040
49 number of CFI chips: 1
50 cfi_cmdset_0002: Disabling fast programming due to code brokenness.
51 Flash device: 0x400000 at 0x1c000000
52 Creating 4 MTD partitions on "Physically mapped flash":
53 0x00000000-0x00040000 : "pmon"
54 0x00040000-0x003f0000 : "linux"
55 0x000f0000-0x003f0000 : "rootfs"
56 0x003f0000-0x00400000 : "nvram"
57 sflash: found no supported devices
58 Initializing Cryptographic API
59 NET4: Linux TCP/IP 1.0 for NET4.0
60 IP Protocols: ICMP, UDP, TCP, IGMP
61 IP: routing cache hash table of 512 buckets, 4Kbytes
62 TCP: Hash tables configured (established 2048 bind 4096)
63 ip_conntrack version 2.1 (256 buckets, 2048 max) - 288 bytes per conntrack
64 ip_tables: (C) 2000-2002 Netfilter core team
65 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
66 NET4: Ethernet Bridge 008 for NET4.0
67 Bridge firewalling registered
68 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
69 All bugs added by David S. Miller <davem@redhat.com>
70 VFS: Mounted root (jffs2 filesystem) readonly.
71 Mounted devfs on /dev
72 Freeing unused kernel memory: 88k freed
73 Algorithmics/MIPS FPU Emulator v1.5
74 diag boardtype: 00000000
75 using v2 hardware
76 jffs2.bbc: SIZE compression mode activated.
77 PCI: Setting latency timer of device 00:01.0 to 64
78 5325E phy=0
79 5325E VLAN programming for BCM5325E-MDIO I/F switch
80 eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
81 PCI: Setting latency timer of device 01:03.0 to 64
82 PCI: Enabling device 01:03.0 (0004 -> 0006)
83 eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
84 device eth0 entered promiscuous mode
85 vlan0: add 01:00:5e:00:00:01 mcast address to master interface
86 device eth1 entered promiscuous mode
87 eth1: attempt to add interface with same source address.
88 br0: port 2(eth1) entering listening state
89 br0: port 1(vlan0) entering listening state
90 br0: port 2(eth1) entering learning state
91 br0: port 1(vlan0) entering learning state
92 br0: port 2(eth1) entering forwarding state
93 br0: topology change detected, propagating
94 br0: port 1(vlan0) entering forwarding state
95 br0: topology change detected, propagating
96 CSLIP: code copyright 1989 Regents of the University of California
97 PPP generic driver version 2.4.2