package/base-files/files/lib/preinit/10_indicate_preinit

   1 #!/bin/sh
   2 # Copyright (C) 2006 OpenWrt.org
   3 # Copyright (C) 2010 Vertical Communications
   4
   5 preinit_ip_config() {
   6         local netdev vid
   7
   8         netdev=${1%\.*}
   9         vid=${1#*\.}
  10
  11         if [ "$vid" = "$netdev" ]; then
  12                 vid=
  13         fi
  14
  15         grep -q "$netdev" /proc/net/dev || return
  16
  17         if [ -n "$vid" ]; then
  18                 ip link add link $netdev name $1 type vlan id $vid
  19         fi
  20
  21         ip link set dev $netdev up
  22         ip -4 address add $pi_ip/$pi_netmask broadcast $pi_broadcast dev $1
  23 }
  24
  25 preinit_config_switch() {
  26         local role roles ports device enable reset
  27
  28         local name=$1
  29         local lan_if=$2
  30
  31         json_select switch
  32         json_select $name
  33
  34         json_get_vars enable reset
  35
  36         if json_is_a roles array; then
  37                 json_get_keys roles roles
  38                 json_select roles
  39
  40                 for role in $roles; do
  41                         json_select "$role"
  42                         json_get_vars ports device
  43                         json_select ..
  44
  45                         if [ "$device" = "$lan_if" ]; then
  46                                 swconfig dev $name set reset $reset
  47                                 swconfig dev $name set enable_vlan $enable
  48                                 swconfig dev $name vlan $role set ports "$ports"
  49                                 swconfig dev $name set apply
  50                         fi
  51                 done
  52
  53                 json_select ..
  54         fi
  55
  56         json_select ..
  57         json_select ..
  58 }
  59
  60 preinit_config_board() {
  61         /bin/board_detect /tmp/board.json
  62
  63         [ -f "/tmp/board.json" ] || return
  64
  65         . /usr/share/libubox/jshn.sh
  66
  67         json_init
  68         json_load "$(cat /tmp/board.json)"
  69
  70         json_select network
  71                 json_select "lan"
  72                         json_get_vars ifname
  73                 json_select ..
  74         json_select ..
  75
  76         [ -n "$ifname" ] || return
  77
  78         # only use the first one
  79         ifname=${ifname%% *}
  80
  81         if [ -x /sbin/swconfig ]; then
  82                 # configure the switch, if present
  83
  84                 json_get_keys keys switch
  85                 for key in $keys; do
  86                         preinit_config_switch $key $ifname
  87                 done
  88         else
  89                 # trim any vlan ids
  90                 ifname=${ifname%\.*}
  91         fi
  92
  93         pi_ifname=$ifname
  94
  95         preinit_ip_config $pi_ifname
  96 }
  97
  98 preinit_ip() {
  99         [ "$pi_preinit_no_failsafe" = "y" ] && return
 100
 101         # if the preinit interface isn't specified and ifname is set in
 102         # preinit.arch use that interface
 103         if [ -z "$pi_ifname" ]; then
 104                 pi_ifname=$ifname
 105         fi
 106
 107         if [ -n "$pi_ifname" ]; then
 108                 preinit_ip_config $pi_ifname
 109         elif [ -d "/etc/board.d/" ]; then
 110                 preinit_config_board
 111         fi
 112
 113         preinit_net_echo "Doing Lede Preinit\n"
 114 }
 115
 116 preinit_ip_deconfig() {
 117         [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
 118                 local netdev vid
 119
 120                 netdev=${pi_ifname%\.*}
 121                 vid=${pi_ifname#*\.}
 122
 123                 if [ "$vid" = "$netdev" ]; then
 124                         vid=
 125                 fi
 126
 127                 ip -4 address flush dev $pi_ifname
 128                 ip link set dev $netdev down
 129
 130                 if [ -n "$vid" ]; then
 131                         ip link delete $pi_ifname
 132                 fi
 133         }
 134 }
 135
 136 preinit_net_echo() {
 137         [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
 138                 {
 139                         [ "$pi_preinit_net_messages" = "y" ] || {
 140                                 [ "$pi_failsafe_net_message" = "true" ] &&
 141                                         [ "$pi_preinit_no_failsafe_netmsg" != "y" ]
 142                         }
 143                 } && netmsg $pi_broadcast "$1"
 144         }
 145 }
 146
 147 preinit_echo() {
 148         preinit_net_echo $1
 149         echo $1
 150 }
 151
 152 pi_indicate_preinit() {
 153         set_state preinit
 154 }
 155
 156 boot_hook_add preinit_main preinit_ip
 157 boot_hook_add preinit_main pi_indicate_preinit