package/base-files/image-config.in

   1 # Copyright (C) 2006-2012 OpenWrt.org
   2 # Copyright (C) 2010 Vertical Communications
   3 #
   4 # This is free software, licensed under the GNU General Public License v2.
   5 # See /LICENSE for more information.
   6 #
   7
   8 menuconfig PREINITOPT
   9         bool "Preinit configuration options" if IMAGEOPT
  10         default n
  11         help
  12                 These options are used to control the environment used to initialize
  13                 the system before running init (which typically mean /sbin/init which
  14                 switches to multiuser mode).
  15
  16 config TARGET_PREINIT_SUPPRESS_STDERR
  17         bool "Suppress stderr messages during preinit" if PREINITOPT
  18         default y
  19         help
  20                 Sends stderr to null during preinit.  This is the default behaviour
  21                 in previous versions of OpenWrt.  This also prevents init process
  22                 itself from displaying stderr, however processes launched by init
  23                 in multiuser through inittab will use the current terminal (e.g.
  24                 the ash shell launched by inittab will display stderr).  That's
  25                 the same behaviour as seen in previous version of OpenWrt.
  26
  27 config TARGET_PREINIT_DISABLE_FAILSAFE
  28         bool
  29         prompt "Disable failsafe" if PREINITOPT
  30         default n
  31         help
  32                 Disable failsafe mode.  While it is very handy while
  33                 experimenting or developing it really ought to be
  34                 disabled in production environments as it is a major
  35                 security loophole.
  36
  37 config TARGET_PREINIT_TIMEOUT
  38         int
  39         prompt "Failsafe/Debug wait timeout" if PREINITOPT
  40         default 2
  41         help
  42                 How long to wait for failsafe mode to be entered or for
  43                 a debug option to be pressed before continuing with a
  44                 regular boot.
  45
  46 config TARGET_PREINIT_SHOW_NETMSG
  47         bool
  48         prompt "Show all preinit network messages" if PREINITOPT
  49         default n
  50         help
  51                 Show preinit all network messages (via netmsg broadcast), not only
  52                 the message indicating to press reset to enter failsafe.  Note that
  53                 if the architecture doesn't define an interface, and there is no
  54                 'Preinit network interface' defined, then no messages will be
  55                 emitted, even if this is set.
  56
  57 config TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG
  58         bool
  59         prompt "Suppress network message indicating failsafe" if ( PREINITOPT && !TARGET_PREINIT_SHOW_NETMSG && !TARGET_PREINIT_DISABLE_FAILSAFE )
  60         default n
  61         help
  62                 If "Show all preinit network messages" above is not set, then
  63                 setting this option suppresses the only message that would be
  64                 emitted otherwise, name the network message to enter failsafe
  65                 (via netmsg).
  66
  67 config TARGET_PREINIT_IFNAME
  68         string
  69         prompt "Preinit network interface" if PREINITOPT
  70         default ""
  71         help
  72                 Interface for sending preinit messages to network, and any other
  73                 default networking in failsafe or preinit.  If empty
  74                 uses $ifname (if defined in /etc/preinit.arch).
  75
  76 config TARGET_PREINIT_IP
  77         string
  78         prompt "IP address for preinit network messages" if PREINITOPT
  79         default "192.168.1.1"
  80         help
  81                 IP address used to configure interface for preinit network
  82                 messages, including failsafe messages
  83
  84 config TARGET_PREINIT_NETMASK
  85         string
  86         prompt "Netmask for preinit network messages" if PREINITOPT
  87         default "255.255.255.0"
  88         help
  89                 Netmask used to configure interface for preinit network
  90                 messages, including failsafes messages
  91
  92 config TARGET_PREINIT_BROADCAST
  93         string
  94         prompt "Broadcast address for preinit network messages" if PREINITOPT
  95         default "192.168.1.255"
  96         help
  97                 Broadcast address to which to send preinit network messages, as
  98                 as failsafe messages
  99
 100
 101 menuconfig INITOPT
 102         bool "Init configuration options" if IMAGEOPT
 103         default n
 104         help
 105                 These option choose the command that will run as the 'init' command
 106                 (that is which is responsible for controlling the system once preinit
 107                 transfers control to it) as well as some options controlling its
 108                 behaviour.  Normally init is /sbin/init.
 109
 110         config TARGET_INIT_PATH
 111                 string
 112                 prompt "PATH for regular boot" if INITOPT
 113                 default "/usr/sbin:/usr/bin:/sbin:/bin"
 114                 help
 115                         Default PATH used during normal operation
 116
 117         config TARGET_INIT_ENV
 118                 string
 119                 prompt "Environment variables to set when starting init (start with none)" if INITOPT
 120                 default ""
 121                 help
 122                         Should be a space seperated list of variable assignments.  These
 123                         variables will be present in the environment.  Spaces may not be
 124                         present (including through expansion) even in a quoted string
 125                         (env doesn't understanding quoting).
 126
 127         config TARGET_INIT_CMD
 128                 string
 129                 prompt "Init command" if INITOPT
 130                 default "/sbin/init"
 131                 help
 132                         The executable to run as the init process.  Is 'exec'd by
 133                         preinit (which is the init that the kernel launches on boot).
 134
 135         config TARGET_INIT_SUPPRESS_STDERR
 136                 bool
 137                 prompt "Suppress stderr messages of init" if INITOPT
 138                 default y
 139                 help
 140                         Prevents showing stderr messages for init command if not already
 141                         suppressed during preinit.  This is the default behaviour in
 142                         previous versions of OpenWrt.  Removing this does nothing if
 143                         stderr is suppressed during preinit (which is the default).
 144
 145
 146 menuconfig VERSIONOPT
 147         bool "Version configuration options" if IMAGEOPT
 148         default n
 149         help
 150                 These options allow to override the version information embedded in
 151                 the /etc/openwrt_version, /etc/openwrt_release, /etc/banner and
 152                 /etc/opkg.conf files. Usually there is no need to set these, but
 153                 they're useful for release builds or custom OpenWrt redistributions
 154                 that should carry custom version tags.
 155
 156 if VERSIONOPT
 157
 158         config VERSION_DIST
 159                 string
 160                 prompt "Release distribution"
 161                 default "Lede"
 162                 help
 163                         This is the name of the release distribution.
 164                         If unspecified, it defaults to OpenWrt.
 165
 166         config VERSION_NICK
 167                 string
 168                 prompt "Release version nickname"
 169                 help
 170                         This is the release codename embedded in the image.
 171                         If unspecified, it defaults to the name of source branch.
 172
 173         config VERSION_NUMBER
 174                 string
 175                 prompt "Release version number"
 176                 help
 177                         This is the release version number embedded in the image.
 178                         If unspecified, it defaults to the svn or git-svn revision
 179                         of the build tree.
 180
 181         config VERSION_REPO
 182                 string
 183                 prompt "Release repository"
 184                 default "http://downloads.lede-project.org/snapshots"
 185                 help
 186                         This is the repository address embedded in the image, it defaults
 187                         to the trunk snapshot repo; the url may contain the following placeholders:
 188                          %R .. Revision number
 189                          %V .. Release version or revision number, uppercase
 190                          %v .. Release version or revision number, lowercase
 191                          %C .. Release version or "HEAD", uppercase
 192                          %c .. Release version or "head", lowercase
 193                          %N .. Release name, uppercase
 194                          %n .. Release name, lowercase
 195                          %D .. Distribution name or "Lede", uppercase
 196                          %d .. Distribution name or "lede", lowercase
 197                          %T .. Target name
 198                          %S .. Target/Subtarget name
 199                          %A .. Package architecture
 200                          %t .. Build taint flags, e.g. "no-all busybox"
 201                          %M .. Manufacturer name or "Lede"
 202                          %P .. Product name or "Generic"
 203                          %h .. Hardware revision or "v0"
 204
 205         config VERSION_MANUFACTURER
 206                 string
 207                 prompt "Manufacturer name"
 208                 help
 209                         This is the manufacturer name embedded in /etc/device_info
 210                         Useful for OEMs building OpenWrt based firmware
 211
 212         config VERSION_MANUFACTURER_URL
 213                 string
 214                 prompt "Manufacturer URL"
 215                 help
 216                         This is an URL to the manufacturer's website embedded in /etc/device_info
 217                         Useful for OEMs building OpenWrt based firmware
 218
 219         config VERSION_PRODUCT
 220                 string
 221                 prompt "Product name"
 222                 help
 223                         This is the product name embedded in /etc/device_info
 224                         Useful for OEMs building OpenWrt based firmware
 225
 226         config VERSION_HWREV
 227                 string
 228                 prompt "Hardware revision"
 229                 help
 230                         This is the hardware revision string embedded in /etc/device_info
 231                         Useful for OEMs building OpenWrt based firmware
 232
 233         config VERSION_FILENAMES
 234                 bool
 235                 prompt "Version number in filenames"
 236                 default y
 237                 help
 238                         Enable this to include the version number in firmware image, SDK-
 239                         and Image Builder archive file names
 240 endif
 241
 242
 243 menuconfig PER_FEED_REPO
 244         bool "Separate feed repositories" if IMAGEOPT
 245         default y
 246         help
 247                 If set, a separate repository is generated within bin/*/packages/
 248                 for the core packages and each enabled feed.
 249
 250         config PER_FEED_REPO_ADD_DISABLED
 251                 bool "Add available but not enabled feeds to opkg.conf"
 252                 default y
 253                 depends on PER_FEED_REPO
 254                 help
 255                   Add not installed or disabled feeds from feeds.conf to opkg.conf.
 256
 257         config PER_FEED_REPO_ADD_COMMENTED
 258                 bool "Comment out not enabled feeds"
 259                 default y
 260                 depends on PER_FEED_REPO && PER_FEED_REPO_ADD_DISABLED
 261                 help
 262                   Add not enabled feeds as commented out source lines to opkg.conf.
 263
 264 source "tmp/.config-feeds.in"
 265
 266
 267 menuconfig SMIMEOPT
 268         bool "Package signing options" if IMAGEOPT
 269         default n
 270         help
 271                 These options configure the signing key and certificate to
 272                 be used for signing and verifying packages.
 273
 274         config OPKGSMIME_CERT
 275                 string
 276                 prompt "Path to certificate (PEM certificate format)" if SMIMEOPT
 277                 help
 278                   Path to the certificate to use for signature verification
 279
 280         config OPKGSMIME_KEY
 281                 string
 282                 prompt "Path to signing key (PEM private key format)" if SMIMEOPT
 283                 help
 284                   Path to the key to use for signing packages
 285
 286         config OPKGSMIME_PASSPHRASE
 287                 bool
 288                 default y
 289                 prompt "Wait for a passphrase when signing packages?" if SMIMEOPT
 290                 help
 291                   If this value is set, then the build will pause and request a passphrase
 292                   from the command line when signing packages. This SHOULD NOT be used with
 293                   automatic builds. If this value is not set, a file can be specified from
 294                   which the passphrase will be read.
 295
 296         config OPKGSMIME_PASSFILE
 297                 string
 298                 prompt "Path to a file containing the passphrase" if SMIMEOPT
 299                 depends on !OPKGSMIME_PASSPHRASE
 300                 help
 301                   Path to a file containing the passphrase for the signing key.
 302                   If the signing key is not encrypted and does not require a passphrase,
 303                   this option may be left blank.