remove the brcm-2.4 target, it will no longer be supported in future releases. please...
[openwrt/openwrt.git] / package / broadcom-wl-old / src / driver / proto / bcmarp.h
1 /*
2 * Copyright 2007, Broadcom Corporation
3 * All Rights Reserved.
4 *
5 * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;
6 * the contents of this file may not be disclosed to third parties, copied
7 * or duplicated in any form, in whole or in part, without the prior
8 * written permission of Broadcom Corporation.
9 *
10 * Fundamental constants relating to ARP Protocol
11 *
12 */
13
14 #ifndef _bcmarp_h_
15 #define _bcmarp_h_
16
17 /* enable structure packing */
18 #if defined(__GNUC__)
19 #define PACKED __attribute__((packed))
20 #else
21 #pragma pack(1)
22 #define PACKED
23 #endif
24
25 #define ARP_OPC_OFFSET 6 /* option code offset */
26 #define ARP_SRC_ETH_OFFSET 8 /* src h/w address offset */
27 #define ARP_SRC_IP_OFFSET 14 /* src IP address offset */
28 #define ARP_TGT_ETH_OFFSET 18 /* target h/w address offset */
29 #define ARP_TGT_IP_OFFSET 24 /* target IP address offset */
30
31 #define ARP_OPC_REQUEST 1 /* ARP request */
32 #define ARP_OPC_REPLY 2 /* ARP reply */
33
34 #define ARP_DATA_LEN 28 /* ARP data length */
35
36 struct bcmarp {
37 uint16 htype; /* Header type (1 = ethernet) */
38 uint16 ptype; /* Protocol type (0x800 = IP) */
39 uint8 hlen; /* Hardware address length (Eth = 6) */
40 uint8 plen; /* Protocol address length (IP = 4) */
41 uint16 oper; /* ARP_OPC_... */
42 uint8 src_eth[ETHER_ADDR_LEN]; /* Source hardware address */
43 uint8 src_ip[IPV4_ADDR_LEN]; /* Source protocol address (not aligned) */
44 uint8 dst_eth[ETHER_ADDR_LEN]; /* Destination hardware address */
45 uint8 dst_ip[IPV4_ADDR_LEN]; /* Destination protocol address */
46 } PACKED;
47
48 /* Ethernet header + Arp message */
49 struct bcmetharp {
50 struct ether_header eh;
51 struct bcmarp arp;
52 } PACKED;
53
54 #undef PACKED
55 #if !defined(__GNUC__)
56 #pragma pack()
57 #endif
58
59 #endif /* !defined(_bcmarp_h_) */