b8ab6a4be330f684fd9f5739d8f6e132b1fff2db
[openwrt/openwrt.git] / package / kernel / lantiq / ltq-vmmc / Config.in
1 choice
2 prompt "device selection"
3 depends on PACKAGE_kmod-ltq-vmmc
4 default VOICE_CPE_VMMC_WITH_DEVICE_DANUBE
5 help
6 Select the target device.
7
8 config VOICE_CPE_VMMC_WITH_DEVICE_DANUBE
9 bool "Danube, Twinpass, Vinax"
10 depends on TARGET_lantiq_xway
11
12 # config VOICE_CPE_VMMC_WITH_DEVICE_AR9
13 # bool "AR9 family"
14 # depends on TARGET_lantiq_ar9
15
16 config VOICE_CPE_VMMC_WITH_DEVICE_VR9
17 bool "VR9 family"
18 depends on TARGET_lantiq_xrx200
19
20 config VOICE_VMMC_WITH_DEVICE_FALCON
21 bool "FALC-ON"
22 depends on (TARGET_lantiq_falcon||TARGET_lantiq_falcon_stable)
23
24 endchoice
25
26 choice
27 depends on PACKAGE_kmod-ltq-vmmc
28 prompt "FXS coefficients"
29 default LTQ_VOICE_CPE_VMMC_COEF_FALCON_ETSI
30 help
31 Select country specific FXS coefficient file.
32
33 config LTQ_VOICE_CPE_VMMC_COEF_FALCON_ETSI
34 bool "ETSI_T3R10: Vl:40V, Ic:25mA, Vid:25V, Vri:45Vrms, f:25Hz"
35 help
36 These coefficents contains a parameter set with line impedance Zr according to ETSI.
37
38 T: gain in transmit direction (attenuation 3dBr) [dBr]
39 R: gain in receive direction (attenuation 10dBr) [dBr]
40 Vl: on-hook voltage limit [V]
41 Ic: off-hook loop current [mA]
42 Vid: low-power-standby voltage [V]
43 Vri: ring voltage [v]
44 f: ring frequency [V]
45
46 config LTQ_VOICE_CPE_VMMC_COEF_FALCON_US600R
47 bool "USA_600R_T3R10: Vl:40V, Ic:25mA, Vid:25V, Vri:45V, f:20Hz"
48 help
49 These coefficents contains a parameter set with line impedance e.g. for USA.
50
51 T: gain in transmit direction (attenuation 3dBr) [dBr]
52 R: gain in receive direction (attenuation 10dBr) [dBr]
53 Vl: on-hook voltage limit [V]
54 Ic: off-hook loop current [mA]
55 Vid: low-power-standby voltage [V]
56 Vri: ring voltage [v]
57 f: ring frequency [V]
58
59 config LTQ_VOICE_CPE_VMMC_COEF_FALCON_USE_CUSTOM_FILE
60 bool "Select own FXS coefficient file"
61 endchoice
62
63 config VOICE_CPE_VMMC_PMC
64 depends on (VOICE_CPE_VMMC_WITH_DEVICE_AR9 || VOICE_CPE_VMMC_WITH_DEVICE_VR9)
65 bool "Power Management Control support"
66 default n
67 help
68 Option to enable Power Management Control on AR9, VR9. Not supported for Danube.
69
70 config VOICE_CPE_VMMC_DISABLE_DECT_NIBBLE_SWAP
71 bool "Disable DECT nibble swap"
72 depends on PACKAGE_kmod-ltq-vmmc
73 default n
74 help
75 Option to disable DECT nibble swap for COSIC modem (for backward compatibility only).
76
77 config VOICE_CPE_VMMC_EVENT_LOGGER
78 depends on BROKEN
79 bool "Event logger support"
80 depends on PACKAGE_kmod-ltq-vmmc
81 default n
82 help
83 Option to enable details traces between drv_vmmc and the voice FW
84 - for debugging only
85 - requires package ifx-evtlog
86
87 config VOICE_CPE_VMMC_MPS_HISTORY_SIZE
88 int "MPS history buffer in words (0<=size<=512)"
89 depends on PACKAGE_kmod-ltq-vmmc
90 default "128"
91 help
92 MPS history buffer (default=128 words, maximum=512 words, 0=disable)
93 To opimize the memory footprint in RAM, you might want to set the
94 buffer size to 0.
95