package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh

   1 #!/bin/sh
   2 . /lib/netifd/netifd-wireless.sh
   3 . /lib/netifd/hostapd.sh
   4
   5 init_wireless_driver "$@"
   6
   7 MP_CONFIG_INT="mesh_retry_timeout mesh_confirm_timeout mesh_holding_timeout mesh_max_peer_links
   8                mesh_max_retries mesh_ttl mesh_element_ttl mesh_hwmp_max_preq_retries
   9                mesh_path_refresh_time mesh_min_discovery_timeout mesh_hwmp_active_path_timeout
  10                mesh_hwmp_preq_min_interval mesh_hwmp_net_diameter_traversal_time mesh_hwmp_rootmode
  11                mesh_hwmp_rann_interval mesh_gate_announcements mesh_sync_offset_max_neighor
  12                mesh_rssi_threshold mesh_hwmp_active_path_to_root_timeout mesh_hwmp_root_interval
  13                mesh_hwmp_confirmation_interval mesh_awake_window mesh_plink_timeout"
  14 MP_CONFIG_BOOL="mesh_auto_open_plinks mesh_fwding"
  15 MP_CONFIG_STRING="mesh_power_mode"
  16
  17 drv_mac80211_init_device_config() {
  18         hostapd_common_add_device_config
  19
  20         config_add_string path phy 'macaddr:macaddr'
  21         config_add_string hwmode
  22         config_add_int beacon_int chanbw frag rts
  23         config_add_int rxantenna txantenna antenna_gain txpower distance
  24         config_add_boolean noscan
  25         config_add_array ht_capab
  26         config_add_boolean \
  27                 rxldpc \
  28                 short_gi_80 \
  29                 short_gi_160 \
  30                 tx_stbc_2by1 \
  31                 su_beamformer \
  32                 su_beamformee \
  33                 mu_beamformer \
  34                 mu_beamformee \
  35                 vht_txop_ps \
  36                 htc_vht \
  37                 rx_antenna_pattern \
  38                 tx_antenna_pattern
  39         config_add_int vht_max_mpdu vht_max_rx_stbc vht_link_adapt vht160
  40 }
  41
  42 drv_mac80211_init_iface_config() {
  43         hostapd_common_add_bss_config
  44
  45         config_add_string 'macaddr:macaddr' ifname
  46
  47         config_add_boolean wds powersave
  48         config_add_int maxassoc
  49         config_add_int max_listen_int
  50         config_add_int dtim_interval
  51
  52         # mesh
  53         config_add_string mesh_id
  54         config_add_int $MP_CONFIG_INT
  55         config_add_boolean $MP_CONFIG_BOOL
  56         config_add_string $MP_CONFIG_STRING
  57 }
  58
  59 mac80211_hostapd_setup_base() {
  60         local phy="$1"
  61
  62         json_select config
  63
  64         [ "$auto_channel" -gt 0 ] && channel=acs_survey
  65
  66         [ "$enable_ht" -gt 0 ] && {
  67                 json_get_vars noscan htmode
  68                 json_get_values ht_capab_list ht_capab
  69
  70                 ieee80211n=1
  71                 ht_capab=
  72                 case "$htmode" in
  73                         HT20) ;;
  74                         HT40*|VHT40|VHT80|VHT160)
  75                                 case "$(( ($channel / 4) % 2 ))" in
  76                                         1) ht_capab="[HT40+]";;
  77                                         0) ht_capab="[HT40-]";;
  78                                 esac
  79                         ;;
  80                         *) ieee80211n= ;;
  81                 esac
  82
  83                 [ -n "$ieee80211n" ] && append base_cfg "ieee80211n=1" "$N"
  84
  85                 for cap in $ht_capab_list; do
  86                         ht_capab="$ht_capab[$cap]"
  87                 done
  88
  89                 [ -n "$ht_capab" ] && append base_cfg "ht_capab=$ht_capab" "$N"
  90
  91                 # 802.11ac
  92                 enable_ac=0
  93                 idx="$channel"
  94                 case "$htmode" in
  95                         VHT40)
  96                                 case "$(( ($channel / 4) % 2 ))" in
  97                                         1) idx=$(($channel + 2));;
  98                                         0) idx=$(($channel - 2));;
  99                                 esac
 100                                 enable_ac=1
 101                                 append base_cfg "vht_oper_chwidth=0" "$N"
 102                                 append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N"
 103                         ;;
 104                         VHT80)
 105                                 case "$(( ($channel / 4) % 2 ))" in
 106                                         1) idx=$(($channel + 6));;
 107                                         2) idx=$(($channel + 2));;
 108                                         3) idx=$(($channel - 2));;
 109                                         0) idx=$(($channel - 6));;
 110                                 esac
 111                                 enable_ac=1
 112                                 append base_cfg "vht_oper_chwidth=1" "$N"
 113                                 append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N"
 114                         ;;
 115                         VHT160)
 116                                 case "$channel" in
 117                                         36|40|44|48|52|56|60|64) idx=50;;
 118                                         100|104|108|112|116|120|124|128) idx=114;;
 119                                 esac
 120                                 enable_ac=1
 121                                 append base_cfg "vht_oper_chwidth=2" "$N"
 122                                 append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N"
 123                         ;;
 124                 esac
 125
 126                 if [ "$enable_ac" != "0" ]; then
 127                         json_get_vars \
 128                                 rxldpc:1 \
 129                                 short_gi_80:1 \
 130                                 short_gi_160:1 \
 131                                 tx_stbc_2by1:1 \
 132                                 su_beamformer:1 \
 133                                 su_beamformee:1 \
 134                                 mu_beamformer:1 \
 135                                 mu_beamformee:1 \
 136                                 vht_txop_ps:1 \
 137                                 htc_vht:1 \
 138                                 rx_antenna_pattern:1 \
 139                                 tx_antenna_pattern:1 \
 140                                 vht_max_mpdu:11454 \
 141                                 vht_max_rx_stbc:4 \
 142                                 vht_link_adapt:3 \
 143                                 vht160:2
 144
 145                         append base_cfg "ieee80211ac=1" "$N"
 146                         vht_capab=""
 147                         vht_cap=0
 148                         for cap in $(iw phy "$phy" info | awk -F "[()]" '/VHT Capabilities/ { print $2 }'); do
 149                                 vht_cap="$(($vht_cap | $cap))"
 150                         done
 151
 152                         # boolean
 153                         [ "$((($vht_cap & 16) * $rxldpc))" -eq 16 ] && \
 154                                 vht_capab="$vht_capab[RXLDPC]"
 155                         [ "$((($vht_cap & 32) * $short_gi_80))" -eq 32 ] && \
 156                                 vht_capab="$vht_capab[SHORT-GI-80]"
 157                         [ "$((($vht_cap & 64) * $short_gi_160))" -eq 64 ] && \
 158                                 vht_capab="$vht_capab[SHORT-GI-160]"
 159                         [ "$((($vht_cap & 128) * $tx_stbc_2by1))" -eq 128 ] && \
 160                                 vht_capab="$vht_capab[TX-STBC-2BY1]"
 161                         [ "$((($vht_cap & 2048) * $su_beamformer))" -eq 2048 ] && \
 162                                 vht_capab="$vht_capab[SU-BEAMFORMER]"
 163                         [ "$((($vht_cap & 4096) * $su_beamformee))" -eq 4096 ] && \
 164                                 vht_capab="$vht_capab[SU-BEAMFORMEE]"
 165                         [ "$((($vht_cap & 524288) * $mu_beamformer))" -eq 524288 ] && \
 166                                 vht_capab="$vht_capab[MU-BEAMFORMER]"
 167                         [ "$((($vht_cap & 1048576) * $mu_beamformee))" -eq 1048576 ] && \
 168                                 vht_capab="$vht_capab[MU-BEAMFORMEE]"
 169                         [ "$((($vht_cap & 2097152) * $vht_txop_ps))" -eq 2097152 ] && \
 170                                 vht_capab="$vht_capab[VHT-TXOP-PS]"
 171                         [ "$((($vht_cap & 4194304) * $htc_vht))" -eq 4194304 ] && \
 172                                 vht_capab="$vht_capab[HTC-VHT]"
 173                         [ "$((($vht_cap & 268435456) * $rx_antenna_pattern))" -eq 268435456 ] && \
 174                                 vht_capab="$vht_capab[RX-ANTENNA-PATTERN]"
 175                         [ "$((($vht_cap & 536870912) * $tx_antenna_pattern))" -eq 536870912 ] && \
 176                                 vht_capab="$vht_capab[TX-ANTENNA-PATTERN]"
 177
 178                         # supported Channel widths
 179                         vht160_hw=0
 180                         [ "$(($vht_cap & 12))" -eq 4 -a 1 -le "$vht160" ] && \
 181                                 vht160_hw=1
 182                         [ "$(($vht_cap & 12))" -eq 8 -a 2 -le "$vht160" ] && \
 183                                 vht160_hw=2
 184                         [ "$vht160_hw" = 1 ] && vht_capab="$vht_capab[VHT160]"
 185                         [ "$vht160_hw" = 2 ] && vht_capab="$vht_capab[VHT160-80PLUS80]"
 186
 187                         # maximum MPDU length
 188                         vht_max_mpdu_hw=3895
 189                         [ "$(($vht_cap & 3))" -ge 1 -a 7991 -le "$vht_max_mpdu" ] && \
 190                                 vht_max_mpdu_hw=7991
 191                         [ "$(($vht_cap & 3))" -ge 2 -a 11454 -le "$vht_max_mpdu" ] && \
 192                                 vht_max_mpdu_hw=11454
 193                         [ "$vht_max_mpdu_hw" != 3895 ] && \
 194                                 vht_capab="$vht_capab[MAX-MPDU-$vht_max_mpdu_hw]"
 195
 196                         # support for the reception of PPDUs using STBC
 197                         vht_max_rx_stbc_hw=0
 198                         [ "$(($vht_cap & 1792))" -ge 256 -a 1 -le "$vht_max_rx_stbc" ] && \
 199                                 vht_max_rx_stbc_hw=1
 200                         [ "$(($vht_cap & 1792))" -ge 512 -a 2 -le "$vht_max_rx_stbc" ] && \
 201                                 vht_max_rx_stbc_hw=2
 202                         [ "$(($vht_cap & 1792))" -ge 768 -a 3 -le "$vht_max_rx_stbc" ] && \
 203                                 vht_max_rx_stbc_hw=3
 204                         [ "$(($vht_cap & 1792))" -ge 1024 -a 4 -le "$vht_max_rx_stbc" ] && \
 205                                 vht_max_rx_stbc_hw=4
 206                         [ "$vht_max_rx_stbc_hw" = 1 ] && vht_capab="$vht_capab[RX-STBC-1]"
 207                         [ "$vht_max_rx_stbc_hw" = 2 ] && vht_capab="$vht_capab[RX-STBC-12]"
 208                         [ "$vht_max_rx_stbc_hw" = 3 ] && vht_capab="$vht_capab[RX-STBC-123]"
 209                         [ "$vht_max_rx_stbc_hw" = 4 ] && vht_capab="$vht_capab[RX-STBC-1234]"
 210
 211                         # whether or not the STA supports link adaptation using VHT variant
 212                         vht_link_adapt_hw=0
 213                         [ "$(($vht_cap & 201326592))" -ge 134217728 -a 2 -le "$vht_link_adapt" ] && \
 214                                 vht_link_adapt_hw=2
 215                         [ "$(($vht_cap & 201326592))" -ge 201326592 -a 3 -le "$vht_link_adapt" ] && \
 216                                 vht_link_adapt_hw=3
 217                         [ "$vht_link_adapt_hw" != 0 ] && \
 218                                 vht_capab="$vht_capab[VHT-LINK-ADAPT-$vht_link_adapt_hw]"
 219
 220                         [ -n "$vht_capab" ] && append base_cfg "vht_capab=$vht_capab" "$N"
 221                 fi
 222         }
 223
 224         hostapd_prepare_device_config "$hostapd_conf_file" nl80211
 225         cat >> "$hostapd_conf_file" <<EOF
 226 ${channel:+channel=$channel}
 227 ${noscan:+noscan=$noscan}
 228 $base_cfg
 229
 230 EOF
 231         json_select ..
 232 }
 233
 234 mac80211_hostapd_setup_bss() {
 235         local phy="$1"
 236         local ifname="$2"
 237         local macaddr="$3"
 238         local type="$4"
 239
 240         hostapd_cfg=
 241         append hostapd_cfg "$type=$ifname" "$N"
 242
 243         hostapd_set_bss_options hostapd_cfg "$vif" || return 1
 244         json_get_vars wds dtim_period max_listen_int
 245
 246         set_default wds 0
 247
 248         [ "$wds" -gt 0 ] && append hostapd_cfg "wds_sta=1" "$N"
 249         [ "$staidx" -gt 0 ] && append hostapd_cfg "start_disabled=1" "$N"
 250
 251         cat >> /var/run/hostapd-$phy.conf <<EOF
 252 $hostapd_cfg
 253 bssid=$macaddr
 254 ${dtim_period:+dtim_period=$dtim_period}
 255 ${max_listen_int:+max_listen_interval=$max_listen_int}
 256 EOF
 257 }
 258
 259 mac80211_generate_mac() {
 260         local phy="$1"
 261         local id="${macidx:-0}"
 262
 263         local ref="$(cat /sys/class/ieee80211/${phy}/macaddress)"
 264         local mask="$(cat /sys/class/ieee80211/${phy}/address_mask)"
 265
 266         [ "$mask" = "00:00:00:00:00:00" ] && mask="ff:ff:ff:ff:ff:ff";
 267         local oIFS="$IFS"; IFS=":"; set -- $mask; IFS="$oIFS"
 268
 269         local mask1=$1
 270         local mask6=$6
 271
 272         local oIFS="$IFS"; IFS=":"; set -- $ref; IFS="$oIFS"
 273
 274         macidx=$(($id + 1))
 275         [ "$((0x$mask1))" -gt 0 ] && {
 276                 b1="0x$1"
 277                 [ "$id" -gt 0 ] && \
 278                         b1=$(($b1 ^ ((($id - 1) << 2) | 0x2)))
 279                 printf "%02x:%s:%s:%s:%s:%s" $b1 $2 $3 $4 $5 $6
 280                 return
 281         }
 282
 283         [ "$((0x$mask6))" -lt 255 ] && {
 284                 printf "%s:%s:%s:%s:%s:%02x" $1 $2 $3 $4 $5 $(( 0x$6 ^ $id ))
 285                 return
 286         }
 287
 288         off2=$(( (0x$6 + $id) / 0x100 ))
 289         printf "%s:%s:%s:%s:%02x:%02x" \
 290                 $1 $2 $3 $4 \
 291                 $(( (0x$5 + $off2) % 0x100 )) \
 292                 $(( (0x$6 + $id) % 0x100 ))
 293 }
 294
 295 find_phy() {
 296         [ -n "$phy" -a -d /sys/class/ieee80211/$phy ] && return 0
 297         [ -n "$path" -a -d "/sys/devices/$path/ieee80211" ] && {
 298                 phy="$(ls /sys/devices/$path/ieee80211 | grep -m 1 phy)"
 299                 [ -n "$phy" ] && return 0
 300         }
 301         [ -n "$macaddr" ] && {
 302                 for phy in $(ls /sys/class/ieee80211 2>/dev/null); do
 303                         grep -i -q "$macaddr" "/sys/class/ieee80211/${phy}/macaddress" && return 0
 304                 done
 305         }
 306         return 1
 307 }
 308
 309 mac80211_check_ap() {
 310         has_ap=1
 311 }
 312
 313 mac80211_prepare_vif() {
 314         json_select config
 315
 316         json_get_vars ifname mode ssid wds powersave macaddr
 317
 318         [ -n "$ifname" ] || ifname="wlan${phy#phy}${if_idx:+-$if_idx}"
 319         if_idx=$((${if_idx:-0} + 1))
 320
 321         set_default wds 0
 322         set_default powersave 0
 323
 324         json_select ..
 325
 326         [ -n "$macaddr" ] || {
 327                 macaddr="$(mac80211_generate_mac $phy)"
 328                 macidx="$(($macidx + 1))"
 329         }
 330
 331         json_add_object data
 332         json_add_string ifname "$ifname"
 333         json_close_object
 334         json_select config
 335
 336         # It is far easier to delete and create the desired interface
 337         case "$mode" in
 338                 adhoc)
 339                         iw phy "$phy" interface add "$ifname" type adhoc
 340                 ;;
 341                 ap)
 342                         # Hostapd will handle recreating the interface and
 343                         # subsequent virtual APs belonging to the same PHY
 344                         if [ -n "$hostapd_ctrl" ]; then
 345                                 type=bss
 346                         else
 347                                 type=interface
 348                         fi
 349
 350                         mac80211_hostapd_setup_bss "$phy" "$ifname" "$macaddr" "$type" || return
 351
 352                         [ -n "$hostapd_ctrl" ] || {
 353                                 iw phy "$phy" interface add "$ifname" type managed
 354                                 hostapd_ctrl="${hostapd_ctrl:-/var/run/hostapd/$ifname}"
 355                         }
 356                 ;;
 357                 mesh)
 358                         json_get_vars key mesh_id
 359                         if [ -n "$key" ]; then
 360                                 iw phy "$phy" interface add "$ifname" type mp
 361                         else
 362                                 iw phy "$phy" interface add "$ifname" type mp mesh_id "$mesh_id"
 363                         fi
 364                 ;;
 365                 monitor)
 366                         iw phy "$phy" interface add "$ifname" type monitor
 367                 ;;
 368                 sta)
 369                         local wdsflag=
 370                         staidx="$(($staidx + 1))"
 371                         [ "$wds" -gt 0 ] && wdsflag="4addr on"
 372                         iw phy "$phy" interface add "$ifname" type managed $wdsflag
 373                         [ "$powersave" -gt 0 ] && powersave="on" || powersave="off"
 374                         iw "$ifname" set power_save "$powersave"
 375                 ;;
 376         esac
 377
 378         case "$mode" in
 379                 monitor|mesh)
 380                         [ "$auto_channel" -gt 0 ] || iw dev "$ifname" set channel "$channel" $htmode
 381                 ;;
 382         esac
 383
 384         if [ "$mode" != "ap" ]; then
 385                 # ALL ap functionality will be passed to hostapd
 386                 # All interfaces must have unique mac addresses
 387                 # which can either be explicitly set in the device
 388                 # section, or automatically generated
 389                 ifconfig "$ifname" hw ether "$macaddr"
 390         fi
 391
 392         json_select ..
 393 }
 394
 395 mac80211_setup_supplicant() {
 396         wpa_supplicant_prepare_interface "$ifname" nl80211 || return 1
 397         wpa_supplicant_add_network "$ifname"
 398         wpa_supplicant_run "$ifname" ${hostapd_ctrl:+-H $hostapd_ctrl}
 399 }
 400
 401 mac80211_setup_adhoc() {
 402         json_get_vars bssid ssid key mcast_rate
 403
 404         keyspec=
 405         [ "$auth_type" == "wep" ] && {
 406                 set_default key 1
 407                 case "$key" in
 408                         [1234])
 409                                 local idx
 410                                 for idx in 1 2 3 4; do
 411                                         json_get_var ikey "key$idx"
 412
 413                                         [ -n "$ikey" ] && {
 414                                                 ikey="$(($idx - 1)):$(prepare_key_wep "$ikey")"
 415                                                 [ $idx -eq $key ] && ikey="d:$ikey"
 416                                                 append keyspec "$ikey"
 417                                         }
 418                                 done
 419                         ;;
 420                         *)
 421                                 append keyspec "d:0:$(prepare_key_wep "$key")"
 422                         ;;
 423                 esac
 424         }
 425
 426         brstr=
 427         for br in $basic_rate_list; do
 428                 hostapd_add_rate brstr "$br"
 429         done
 430
 431         mcval=
 432         [ -n "$mcast_rate" ] && hostapd_add_rate mcval "$mcast_rate"
 433
 434         iw dev "$ifname" ibss join "$ssid" $freq $htmode fixed-freq $bssid \
 435                 ${beacon_int:+beacon-interval $beacon_int} \
 436                 ${brstr:+basic-rates $brstr} \
 437                 ${mcval:+mcast-rate $mcval} \
 438                 ${keyspec:+keys $keyspec}
 439 }
 440
 441 mac80211_setup_vif() {
 442         local name="$1"
 443         local failed
 444
 445         json_select data
 446         json_get_vars ifname
 447         json_select ..
 448
 449         json_select config
 450         json_get_vars mode
 451         json_get_var vif_txpower txpower
 452
 453         ifconfig "$ifname" up || {
 454                 wireless_setup_vif_failed IFUP_ERROR
 455                 json_select ..
 456                 return
 457         }
 458
 459         set_default vif_txpower "$txpower"
 460         [ -z "$vif_txpower" ] || iw dev "$ifname" set txpower fixed "${vif_txpower%%.*}00"
 461
 462         case "$mode" in
 463                 mesh)
 464                         for var in $MP_CONFIG_INT $MP_CONFIG_BOOL $MP_CONFIG_STRING; do
 465                                 json_get_var mp_val "$var"
 466                                 [ -n "$mp_val" ] && iw dev "$ifname" set mesh_param "$var" "$mp_val"
 467                         done
 468
 469                         # authsae
 470                         json_get_vars key
 471                         if [ -n "$key" ]; then
 472                                 if [ -e "/lib/wifi/authsae.sh" ]; then
 473                                         . /lib/wifi/authsae.sh
 474                                         authsae_start_interface || failed=1
 475                                 else
 476                                         wireless_setup_vif_failed AUTHSAE_NOT_INSTALLED
 477                                         json_select ..
 478                                         return
 479                                 fi
 480                         fi
 481                 ;;
 482                 adhoc)
 483                         wireless_vif_parse_encryption
 484                         if [ "$wpa" -gt 0 -o "$auto_channel" -gt 0 ]; then
 485                                 mac80211_setup_supplicant || failed=1
 486                         else
 487                                 mac80211_setup_adhoc
 488                         fi
 489                 ;;
 490                 sta)
 491                         mac80211_setup_supplicant || failed=1
 492                 ;;
 493         esac
 494
 495         json_select ..
 496         [ -n "$failed" ] || wireless_add_vif "$name" "$ifname"
 497 }
 498
 499 get_freq() {
 500         local phy="$1"
 501         local chan="$2"
 502         iw "$phy" info | grep -E -m1 "(\* ${chan:-....} MHz${chan:+|\\[$chan\\]})" | grep MHz | awk '{print $2}'
 503 }
 504
 505 mac80211_interface_cleanup() {
 506         local phy="$1"
 507
 508         for wdev in $(list_phy_interfaces "$phy"); do
 509                 ifconfig "$wdev" down 2>/dev/null
 510                 iw dev "$wdev" del
 511         done
 512 }
 513
 514 drv_mac80211_cleanup() {
 515         hostapd_common_cleanup
 516 }
 517
 518 drv_mac80211_setup() {
 519         json_select config
 520         json_get_vars \
 521                 phy macaddr path \
 522                 country chanbw distance \
 523                 txpower antenna_gain \
 524                 rxantenna txantenna \
 525                 frag rts beacon_int
 526         json_get_values basic_rate_list basic_rate
 527         json_select ..
 528
 529         find_phy || {
 530                 echo "Could not find PHY for device '$1'"
 531                 wireless_set_retry 0
 532                 return 1
 533         }
 534
 535         wireless_set_data phy="$phy"
 536         mac80211_interface_cleanup "$phy"
 537
 538         # convert channel to frequency
 539         [ "$auto_channel" -gt 0 ] || freq="$(get_freq "$phy" "$channel")"
 540
 541         [ -n "$country" ] && {
 542                 iw reg get | grep -q "^country $country:" || {
 543                         iw reg set "$country"
 544                         sleep 1
 545                 }
 546         }
 547
 548         hostapd_conf_file="/var/run/hostapd-$phy.conf"
 549
 550         no_ap=1
 551         macidx=0
 552         staidx=0
 553
 554         [ -n "$chanbw" ] && {
 555                 for file in /sys/kernel/debug/ieee80211/$phy/ath9k/chanbw /sys/kernel/debug/ieee80211/$phy/ath5k/bwmode; do
 556                         [ -f "$file" ] && echo "$chanbw" > "$file"
 557                 done
 558         }
 559
 560         set_default rxantenna all
 561         set_default txantenna all
 562         set_default distance 0
 563         set_default antenna_gain 0
 564
 565         iw phy "$phy" set antenna $txantenna $rxantenna >/dev/null 2>&1
 566         iw phy "$phy" set antenna_gain $antenna_gain
 567         iw phy "$phy" set distance "$distance"
 568
 569         [ -n "$frag" ] && iw phy "$phy" set frag "${frag%%.*}"
 570         [ -n "$rts" ] && iw phy "$phy" set rts "${rts%%.*}"
 571
 572         has_ap=
 573         hostapd_ctrl=
 574         for_each_interface "ap" mac80211_check_ap
 575
 576         rm -f "$hostapd_conf_file"
 577         [ -n "$has_ap" ] && mac80211_hostapd_setup_base "$phy"
 578
 579         for_each_interface "sta adhoc mesh monitor" mac80211_prepare_vif
 580         for_each_interface "ap" mac80211_prepare_vif
 581
 582         [ -n "$hostapd_ctrl" ] && {
 583                 /usr/sbin/hostapd -P /var/run/wifi-$phy.pid -B "$hostapd_conf_file"
 584                 ret="$?"
 585                 wireless_add_process "$(cat /var/run/wifi-$phy.pid)" "/usr/sbin/hostapd" 1
 586                 [ "$ret" != 0 ] && {
 587                         wireless_setup_failed HOSTAPD_START_FAILED
 588                         return
 589                 }
 590         }
 591
 592         for_each_interface "ap sta adhoc mesh monitor" mac80211_setup_vif
 593
 594         wireless_set_up
 595 }
 596
 597 list_phy_interfaces() {
 598         local phy="$1"
 599         if [ -d "/sys/class/ieee80211/${phy}/device/net" ]; then
 600                 ls "/sys/class/ieee80211/${phy}/device/net" 2>/dev/null;
 601         else
 602                 ls "/sys/class/ieee80211/${phy}/device" 2>/dev/null | grep net: | sed -e 's,net:,,g'
 603         fi
 604 }
 605
 606 drv_mac80211_teardown() {
 607         wireless_process_kill_all
 608
 609         json_select data
 610         json_get_vars phy
 611         json_select ..
 612
 613         mac80211_interface_cleanup "$phy"
 614 }
 615
 616 add_driver mac80211