2 append DRIVERS
"mac80211"
4 mac80211_hostapd_setup_base
() {
8 cfgfile
="/var/run/hostapd-$phy.conf"
10 config_get device
"$vif" device
11 config_get country
"$device" country
12 config_get hwmode
"$device" hwmode
13 config_get channel
"$device" channel
14 config_get beacon_int
"$device" beacon_int
15 config_get basic_rate_list
"$device" basic_rate
16 config_get_bool noscan
"$device" noscan
18 hostapd_set_log_options base_cfg
"$device"
20 [ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode
"$device"
22 [ "$channel" = auto
] && {
23 channel
=$
(iw phy
"$phy" info | \
24 sed -ne '/MHz/ { /disabled\|passive\|radar/d; s/.*\[//; s/\].*//; p; q }')
25 config_set
"$device" channel
"$channel"
29 config_get hwmode_11n
"$device" hwmode_11n
30 [ -n "$hwmode_11n" ] && {
32 append base_cfg
"ieee80211n=1" "$N"
33 config_get htmode
"$device" htmode
34 config_get ht_capab_list
"$device" ht_capab
36 HT20|HT40
+|HT40-
) ht_capab
="[$htmode]";;
39 for cap
in $ht_capab_list; do
40 ht_capab
="$ht_capab[$cap]"
42 [ -n "$ht_capab" ] && append base_cfg
"ht_capab=$ht_capab" "$N"
47 [ -n "$country" ] && country_ie
=1
48 config_get_bool country_ie
"$device" country_ie
"$country_ie"
49 [ "$country_ie" -gt 0 ] && append base_cfg
"ieee80211d=1" "$N"
52 [ -n "$basic_rate_list" ] && {
53 for br
in $basic_rate_list; do
54 brval
="$(($br / 100))"
55 [ -n "$brstr" ] && brstr
="$brstr "
60 cat >> "$cfgfile" <<EOF
61 ctrl_interface=/var/run/hostapd-$phy
66 wmm_ac_bk_txop_limit=0
71 wmm_ac_be_txop_limit=0
76 wmm_ac_vi_txop_limit=94
81 wmm_ac_vo_txop_limit=47
84 tx_queue_data3_cwmin=15
85 tx_queue_data3_cwmax=1023
86 tx_queue_data3_burst=0
88 tx_queue_data2_cwmin=15
89 tx_queue_data2_cwmax=63
90 tx_queue_data2_burst=0
92 tx_queue_data1_cwmin=7
93 tx_queue_data1_cwmax=15
94 tx_queue_data1_burst=3.0
96 tx_queue_data0_cwmin=3
97 tx_queue_data0_cwmax=7
98 tx_queue_data0_burst=1.5
99 ${hwmode:+hw_mode=$hwmode}
100 ${channel:+channel=$channel}
101 ${beacon_int:+beacon_int=$beacon_int}
102 ${country:+country_code=$country}
103 ${noscan:+noscan=$noscan}
104 ${brstr:+basic_rates=$brstr}
110 mac80211_hostapd_setup_bss
() {
116 cfgfile
="/var/run/hostapd-$phy.conf"
117 config_get ifname
"$vif" ifname
119 if [ -f "$cfgfile" ]; then
120 append hostapd_cfg
"bss=$ifname" "$N"
122 mac80211_hostapd_setup_base
"$phy" "$ifname"
123 append hostapd_cfg
"interface=$ifname" "$N"
127 net_cfg
="$(find_net_config "$vif")"
128 [ -z "$net_cfg" ] || bridge
="$(bridge_interface "$net_cfg")"
129 config_set
"$vif" bridge
"$bridge"
131 hostapd_set_bss_options hostapd_cfg
"$vif"
133 config_get_bool wds
"$vif" wds
0
134 [ "$wds" -gt 0 ] && append hostapd_cfg
"wds_sta=1" "$N"
136 [ "$staidx" -gt 0 ] && append hostapd_cfg
"start_disabled=1" "$N"
138 local macaddr hidden maxassoc wmm
139 config_get macaddr
"$vif" macaddr
140 config_get maxassoc
"$vif" maxassoc
141 config_get dtim_period
"$vif" dtim_period
142 config_get max_listen_int
"$vif" max_listen_int
143 config_get_bool hidden
"$vif" hidden
0
144 config_get_bool wmm
"$vif" wmm
1
145 cat >> /var
/run
/hostapd-
$phy.conf
<<EOF
149 ignore_broadcast_ssid=$hidden
150 ${dtim_period:+dtim_period=$dtim_period}
151 ${max_listen_int:+max_listen_interval=$max_listen_int}
152 ${maxassoc:+max_num_sta=$maxassoc}
156 mac80211_start_vif
() {
161 net_cfg
="$(find_net_config "$vif")"
162 [ -z "$net_cfg" ] || start_net
"$ifname" "$net_cfg"
164 set_wifi_up
"$vif" "$ifname"
169 [ -d /sys
/class
/ieee80211
/$phy ] && return
173 config_get devpath
"$device" path
174 [ -n "$devpath" -a -d "/sys/devices/$devpath/ieee80211" ] && {
175 phy
="$(ls /sys/devices/$devpath/ieee80211 | grep -m 1 phy)"
176 [ -n "$phy" ] && return
179 local macaddr
="$(config_get "$device" macaddr | tr 'A-Z' 'a-z')"
180 [ -n "$macaddr" ] && {
181 for _phy
in $
(ls /sys
/class
/ieee80211
2>/dev
/null
); do
182 [ "$macaddr" = "$(cat /sys/class/ieee80211/${_phy}/macaddress)" ] ||
continue
191 find_mac80211_phy
() {
194 config_get phy
"$device" phy
196 [ -n "$phy" -a -d "/sys/class/ieee80211/$phy" ] ||
{
197 echo "PHY for wifi device $1 not found"
200 config_set
"$device" phy
"$phy"
202 config_get macaddr
"$device" macaddr
203 [ -z "$macaddr" ] && {
204 config_set
"$device" macaddr
"$(cat /sys/class/ieee80211/${phy}/macaddress)"
212 local adhoc sta ap monitor mesh disabled
214 config_get vifs
"$device" vifs
216 config_get_bool disabled
"$vif" disabled
0
217 [ $disabled = 0 ] ||
continue
219 config_get mode
"$vif" mode
221 adhoc|sta|ap|monitor|mesh
)
224 *) echo "$device($vif): Invalid mode, ignored."; continue;;
228 config_set
"$device" vifs
"${ap:+$ap }${adhoc:+$adhoc }${sta:+$sta }${monitor:+$monitor }${mesh:+$mesh}"
231 list_phy_interfaces
() {
233 if [ -d "/sys/class/ieee80211/${phy}/device/net" ]; then
234 ls "/sys/class/ieee80211/${phy}/device/net" 2>/dev
/null
;
236 ls "/sys/class/ieee80211/${phy}/device" 2>/dev
/null |
grep net
: |
sed -e 's,net:,,g'
243 find_mac80211_phy
"$device" ||
return 0
244 config_get phy
"$device" phy
246 set_wifi_down
"$device"
247 # kill all running hostapd and wpa_supplicant processes that
248 # are running on atheros/mac80211 vifs
249 for pid
in `pidof hostapd`; do
250 grep -E "$phy" /proc
/$pid/cmdline
>/dev
/null
&& \
255 for wdev
in $
(list_phy_interfaces
"$phy"); do
256 [ -f "/var/run/$wdev.pid" ] && kill $
(cat /var
/run
/$wdev.pid
) >&/dev
/null
2>&1
257 for pid
in `pidof wpa_supplicant meshd-nl80211`; do
258 grep "$wdev" /proc
/$pid/cmdline
>/dev
/null
&& \
261 ifconfig
"$wdev" down
2>/dev
/null
272 iw
"$phy" info |
grep -E -m1 "(\* ${chan:-....} MHz${chan:+|\\[$chan\\]})" | grep MHz | awk '{print $2}'
275 mac80211_generate_mac() {
280 [ "$mask" = "00:00:00:00:00:00" ] && mask="ff
:ff
:ff
:ff
:ff
:ff
";
281 local oIFS="$IFS"; IFS=":"; set -- $mask; IFS="$oIFS"
286 local oIFS="$IFS"; IFS=":"; set -- $ref; IFS="$oIFS"
287 [ "$
((0x
$mask1))" -gt 0 ] && {
290 b1=$(($b1 ^ ((($id - 1) << 2) | 0x2)))
291 printf "%02x
:%s
:%s
:%s
:%s
:%s
" $b1 $2 $3 $4 $5 $6
295 [ "$
((0x
$mask6))" -lt 255 ] && {
296 printf "%s
:%s
:%s
:%s
:%s
:%02x
" $1 $2 $3 $4 $5 $(( 0x$6 ^ $id ))
300 off2=$(( (0x$6 + $id) / 0x100 ))
301 printf "%s
:%s
:%s
:%s
:%02x
:%02x
" \
303 $(( (0x$5 + $off2) % 0x100 )) \
304 $(( (0x$6 + $id) % 0x100 ))
309 config_get channel "$device" channel
310 config_get vifs "$device" vifs
311 config_get txpower "$device" txpower
312 config_get country "$device" country
313 config_get distance "$device" distance
314 config_get txantenna "$device" txantenna all
315 config_get rxantenna "$device" rxantenna all
316 config_get antenna_gain "$device" antenna_gain 0
317 config_get frag "$device" frag
318 config_get rts "$device" rts
319 find_mac80211_phy "$device" || return 0
320 config_get phy "$device" phy
326 local hostapd_ctrl=""
328 [ -n "$country" ] && {
329 iw reg get | grep -q "^country
$country:" || {
330 iw reg set "$country"
335 config_get chanbw "$device" chanbw
336 [ -n "$chanbw" -a -d /sys/kernel/debug/ieee80211/$phy/ath9k ] && echo "$chanbw" > /sys/kernel/debug/ieee80211/$phy/ath9k/chanbw
337 [ -n "$chanbw" -a -d /sys/kernel/debug/ieee80211/$phy/ath5k ] && echo "$chanbw" > /sys/kernel/debug/ieee80211/$phy/ath5k/bwmode
339 [ "$channel" = "auto
" -o "$channel" = "0" ] || {
343 iw phy "$phy" set antenna $txantenna $rxantenna >/dev/null 2>&1
344 iw phy "$phy" set antenna_gain $antenna_gain
346 [ -n "$distance" ] && iw phy "$phy" set distance "$distance"
347 [ -n "$frag" ] && iw phy "$phy" set frag "${frag%%.*}"
348 [ -n "$rts" ] && iw phy "$phy" set rts "${rts%%.*}"
351 # convert channel to frequency
352 local freq="$
(get_freq
"$phy" "${fixed:+$channel}")"
354 wifi_fixup_hwmode "$device" "g
"
356 config_get ifname "$vif" ifname
357 [ -n "$ifname" ] || {
358 [ $i -gt 0 ] && ifname="wlan
${phy#phy}-$i" || ifname="wlan
${phy#phy}"
360 config_set "$vif" ifname "$ifname"
362 config_get mode "$vif" mode
363 config_get ssid "$vif" ssid
365 # It is far easier to delete and create the desired interface
368 iw phy "$phy" interface add "$ifname" type adhoc
371 # Hostapd will handle recreating the interface and
372 # it's accompanying monitor
373 apidx="$
(($apidx + 1))"
374 [ "$apidx" -gt 1 ] || iw phy "$phy" interface add "$ifname" type managed
377 config_get key "$vif" key ""
378 if [ -n "$key" ]; then
379 iw phy "$phy" interface add "$ifname" type mp
381 config_get mesh_id "$vif" mesh_id
382 iw phy "$phy" interface add "$ifname" type mp mesh_id "$mesh_id"
386 iw phy "$phy" interface add "$ifname" type monitor
390 staidx="$
(($staidx + 1))"
391 config_get_bool wds "$vif" wds 0
392 [ "$wds" -gt 0 ] && wdsflag="4addr on
"
393 iw phy "$phy" interface add "$ifname" type managed $wdsflag
394 config_get_bool powersave "$vif" powersave 0
395 [ "$powersave" -gt 0 ] && powersave="on
" || powersave="off
"
396 iw "$ifname" set power_save "$powersave"
400 # All interfaces must have unique mac addresses
401 # which can either be explicitly set in the device
402 # section, or automatically generated
403 config_get macaddr "$device" macaddr
404 config_get vif_mac "$vif" macaddr
405 [ -n "$vif_mac" ] || {
406 vif_mac="$
(mac80211_generate_mac
$macidx $macaddr $
(cat /sys
/class
/ieee80211
/${phy}/address_mask
))"
407 macidx="$
(($macidx + 1))"
409 [ "$mode" = "ap
" ] || ifconfig "$ifname" hw ether "$vif_mac"
410 config_set "$vif" macaddr "$vif_mac"
414 # ALL ap functionality will be passed to hostapd
418 # ALL station functionality will be passed to wpa_supplicant
420 if [ ! "$mode" = "ap
" ]; then
421 # We attempt to set the channel for all interfaces, although
422 # mac80211 may not support it or the driver might not yet
423 # for ap mode this is handled by hostapd
424 config_get htmode "$device" htmode
429 [ -n "$fixed" -a -n "$channel" ] && iw dev "$ifname" set channel "$channel" $htmode
436 rm -f /var/run/hostapd-$phy.conf
438 config_get mode "$vif" mode
441 mac80211_hostapd_setup_bss "$phy" "$vif" "$staidx"
445 config_get key "$vif" key ""
446 [ -n "$key" ] && authsae_start_interface "$device" "$vif"
451 [ -n "$start_hostapd" ] && {
452 hostapd -P /var/run/wifi-$phy.pid -B /var/run/hostapd-$phy.conf || {
453 echo "Failed to start hostapd
for $phy"
459 config_get mode "$vif" mode
460 config_get ifname "$vif" ifname
461 [ "$mode" = "ap
" ] || continue
462 hostapd_ctrl="${hostapd_ctrl:-/var/run/hostapd-$phy/$ifname}"
463 mac80211_start_vif "$vif" "$ifname"
468 config_get mode "$vif" mode
469 config_get ifname "$vif" ifname
470 [ "$mode" = "ap
" ] || ifconfig "$ifname" up
472 config_get vif_txpower "$vif" txpower
473 # use vif_txpower (from wifi-iface) to override txpower (from
474 # wifi-device) if the latter doesn't exist
475 txpower="${txpower:-$vif_txpower}"
476 [ -z "$txpower" ] || iw dev "$ifname" set txpower fixed "${txpower%%.*}00"
480 config_get bssid "$vif" bssid
481 config_get ssid "$vif" ssid
482 config_get beacon_int "$device" beacon_int
483 config_get basic_rate_list "$device" basic_rate
484 config_get encryption "$vif" encryption
485 config_get key "$vif" key 1
486 config_get mcast_rate "$vif" mcast_rate
487 config_get htmode "$device" htmode
495 [ "$encryption" == "psk
" -o "$encryption" == "psk2
" ] && {
496 if eval "type wpa_supplicant_setup_vif
" 2>/dev/null >/dev/null; then
497 wpa_supplicant_setup_vif "$vif" nl80211 "${hostapd_ctrl:+-H $hostapd_ctrl}" $freq $htmode || {
498 echo "enable_mac80211
($device): Failed to
set up wpa_supplicant
for interface
$ifname" >&2
499 # make sure this wifi interface won't accidentally stay open without encryption
500 ifconfig "$ifname" down
502 mac80211_start_vif "$vif" "$ifname"
507 [ "$encryption" == "wep
" ] && {
511 for idx in 1 2 3 4; do
513 config_get ikey "$vif" "key
$idx"
516 ikey="$
(($idx - 1)):$
(prepare_key_wep
"$ikey")"
517 [ $idx -eq $key ] && ikey="d
:$ikey"
518 append keyspec "$ikey"
522 *) append keyspec "d
:0:$
(prepare_key_wep
"$key")" ;;
526 local br brval brsub brstr
527 [ -n "$basic_rate_list" ] && {
528 for br in $basic_rate_list; do
529 brval="$
(($br / 1000))"
530 brsub="$
((($br / 100) % 10))"
531 [ "$brsub" -gt 0 ] && brval="$brval.
$brsub"
532 [ -n "$brstr" ] && brstr="$brstr,"
538 [ -n "$mcast_rate" ] && {
539 mcval="$
(($mcast_rate / 1000))"
540 mcsub="$
(( ($mcast_rate / 100) % 10 ))"
541 [ "$mcsub" -gt 0 ] && mcval="$mcval.
$mcsub"
544 iw dev "$ifname" ibss join "$ssid" $freq $htmode \
545 ${fixed:+fixed-freq} $bssid \
546 ${beacon_int:+beacon-interval $beacon_int} \
547 ${brstr:+basic-rates $brstr} \
548 ${mcval:+mcast-rate $mcval} \
549 ${keyspec:+keys $keyspec}
552 mp_list="mesh_retry_timeout mesh_confirm_timeout mesh_holding_timeout mesh_max_peer_links
553 mesh_max_retries mesh_ttl mesh_element_ttl mesh_auto_open_plinks mesh_hwmp_max_preq_retries
554 mesh_path_refresh_time mesh_min_discovery_timeout mesh_hwmp_active_path_timeout
555 mesh_hwmp_preq_min_interval mesh_hwmp_net_diameter_traversal_time mesh_hwmp_rootmode
556 mesh_hwmp_rann_interval mesh_gate_announcements mesh_fwding mesh_sync_offset_max_neighor
557 mesh_rssi_threshold mesh_hwmp_active_path_to_root_timeout mesh_hwmp_root_interval
558 mesh_hwmp_confirmation_interval mesh_power_mode mesh_awake_window
"
561 config_get mp_val "$vif" "$mp" ""
562 [ -n "$mp_val" ] && iw dev "$ifname" set mesh_param "$mp" "$mp_val"
566 if eval "type wpa_supplicant_setup_vif
" 2>/dev/null >/dev/null; then
567 wpa_supplicant_setup_vif "$vif" nl80211 "${hostapd_ctrl:+-H $hostapd_ctrl}" || {
568 echo "enable_mac80211
($device): Failed to
set up wpa_supplicant
for interface
$ifname" >&2
569 # make sure this wifi interface won't accidentally stay open without encryption
570 ifconfig "$ifname" down
576 [ "$mode" = "ap
" ] || mac80211_start_vif "$vif" "$ifname"
582 check_mac80211_device() {
583 config_get phy "$1" phy
585 find_mac80211_phy "$1" >/dev/null || return 0
586 config_get phy "$1" phy
588 [ "$phy" = "$dev" ] && found=1
595 config_get type "radio
$devidx" type
596 [ -n "$type" ] || break
597 devidx=$(($devidx + 1))
599 for dev in $(ls /sys/class/ieee80211); do
601 config_foreach check_mac80211_device wifi-device
602 [ "$found" -gt 0 ] && continue
608 for cap in $(iw phy "$dev" info | grep 'Capabilities:' | cut -d: -f2); do
609 ht_cap="$
(($ht_cap |
$cap))"
612 [ "$ht_cap" -gt 0 ] && {
614 append ht_capab " option htmode HT20
" "$N"
616 list=" list ht_capab
"
617 [ "$
(($ht_cap & 1))" -eq 1 ] && append ht_capab "$list LDPC
" "$N"
618 [ "$
(($ht_cap & 16))" -eq 16 ] && append ht_capab "$list GF
" "$N"
619 [ "$
(($ht_cap & 32))" -eq 32 ] && append ht_capab "$list SHORT-GI-20
" "$N"
620 [ "$
(($ht_cap & 64))" -eq 64 ] && append ht_capab "$list SHORT-GI-40
" "$N"
621 [ "$
(($ht_cap & 128))" -eq 128 ] && append ht_capab "$list TX-STBC
" "$N"
622 [ "$
(($ht_cap & 768))" -eq 256 ] && append ht_capab "$list RX-STBC1
" "$N"
623 [ "$
(($ht_cap & 768))" -eq 512 ] && append ht_capab "$list RX-STBC12
" "$N"
624 [ "$
(($ht_cap & 768))" -eq 768 ] && append ht_capab "$list RX-STBC123
" "$N"
625 [ "$
(($ht_cap & 4096))" -eq 4096 ] && append ht_capab "$list DSSS_CCK-40
" "$N"
627 iw phy "$dev" info | grep -q '2412 MHz' || { mode_band="a
"; channel="36"; }
629 if [ -x /usr/bin/readlink ]; then
630 path="$
(readlink
-f /sys
/class
/ieee80211
/${dev}/device
)"
631 path="${path##/sys/devices/}"
632 dev_id=" option path
'$path'"
634 dev_id=" option macaddr $
(cat /sys
/class
/ieee80211
/${dev}/macaddress
)"
638 config wifi-device radio$devidx
640 option channel ${channel}
641 option hwmode 11${mode_11n}${mode_band}
644 # REMOVE THIS LINE TO ENABLE WIFI:
648 option device radio$devidx
652 option encryption none
655 devidx=$(($devidx + 1))