ath10k-ct: depend on kmod-hwmon-core, it gets used when CONFIG_THERMAL is set
[openwrt/openwrt.git] / package / kernel / mac80211 / patches / 652-0002-rtl8xxxu-Pass-tx_info-to-fill_txdesc-in-order-to-hav.patch
1 From f958b1e0806c045830d78c4287fbcddf9e5fd9d0 Mon Sep 17 00:00:00 2001
2 From: Jes Sorensen <Jes.Sorensen@redhat.com>
3 Date: Thu, 6 Oct 2016 21:08:53 -0400
4 Subject: [PATCH] rtl8xxxu: Pass tx_info to fill_txdesc in order to have access
5 to retry count
6
7 In order to obtain retry count for a given rate we need to pass the
8 full struct ieee80211_tx_info to the function setting the rate in he
9 TX descriptor.
10
11 This uncovered a huge bug where the old code would use struct
12 ieee80211_rate.flags to test for rate parameters, which is always
13 zero, instead of the flags value from struct ieee80211_tx_rate.
14
15 Time to find a brown paper bag :(
16
17 Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
18 ---
19 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 27 ++++----
20 .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 71 ++++++++++++++--------
21 2 files changed, 60 insertions(+), 38 deletions(-)
22
23 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
24 +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
25 @@ -1337,10 +1337,11 @@ struct rtl8xxxu_fileops {
26 u32 ramask, int sgi);
27 void (*report_connect) (struct rtl8xxxu_priv *priv,
28 u8 macid, bool connect);
29 - void (*fill_txdesc) (struct ieee80211_hdr *hdr,
30 - struct rtl8xxxu_txdesc32 *tx_desc, u32 rate,
31 - u16 rate_flag, bool sgi, bool short_preamble,
32 - bool ampdu_enable, u32 rts_rate);
33 + void (*fill_txdesc) (struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
34 + struct ieee80211_tx_info *tx_info,
35 + struct rtl8xxxu_txdesc32 *tx_desc, bool sgi,
36 + bool short_preamble, bool ampdu_enable,
37 + u32 rts_rate);
38 int writeN_block_size;
39 int rx_agg_buf_size;
40 char tx_desc_size;
41 @@ -1434,14 +1435,16 @@ int rtl8xxxu_parse_rxdesc24(struct rtl8x
42 int rtl8xxxu_gen2_channel_to_group(int channel);
43 bool rtl8xxxu_gen2_simularity_compare(struct rtl8xxxu_priv *priv,
44 int result[][8], int c1, int c2);
45 -void rtl8xxxu_fill_txdesc_v1(struct ieee80211_hdr *hdr,
46 - struct rtl8xxxu_txdesc32 *tx_desc, u32 rate,
47 - u16 rate_flag, bool sgi, bool short_preamble,
48 - bool ampdu_enable, u32 rts_rate);
49 -void rtl8xxxu_fill_txdesc_v2(struct ieee80211_hdr *hdr,
50 - struct rtl8xxxu_txdesc32 *tx_desc32, u32 rate,
51 - u16 rate_flag, bool sgi, bool short_preamble,
52 - bool ampdu_enable, u32 rts_rate);
53 +void rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
54 + struct ieee80211_tx_info *tx_info,
55 + struct rtl8xxxu_txdesc32 *tx_desc, bool sgi,
56 + bool short_preamble, bool ampdu_enable,
57 + u32 rts_rate);
58 +void rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
59 + struct ieee80211_tx_info *tx_info,
60 + struct rtl8xxxu_txdesc32 *tx_desc32, bool sgi,
61 + bool short_preamble, bool ampdu_enable,
62 + u32 rts_rate);
63
64 extern struct rtl8xxxu_fileops rtl8192cu_fops;
65 extern struct rtl8xxxu_fileops rtl8192eu_fops;
66 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
67 +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
68 @@ -4759,13 +4759,28 @@ static void rtl8xxxu_dump_action(struct
69 * This format is used on 8188cu/8192cu/8723au
70 */
71 void
72 -rtl8xxxu_fill_txdesc_v1(struct ieee80211_hdr *hdr,
73 - struct rtl8xxxu_txdesc32 *tx_desc, u32 rate,
74 - u16 rate_flag, bool sgi, bool short_preamble,
75 - bool ampdu_enable, u32 rts_rate)
76 +rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
77 + struct ieee80211_tx_info *tx_info,
78 + struct rtl8xxxu_txdesc32 *tx_desc, bool sgi,
79 + bool short_preamble, bool ampdu_enable, u32 rts_rate)
80 {
81 + struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info);
82 + struct rtl8xxxu_priv *priv = hw->priv;
83 + struct device *dev = &priv->udev->dev;
84 + u32 rate;
85 + u16 rate_flags = tx_info->control.rates[0].flags;
86 u16 seq_number;
87
88 + if (rate_flags & IEEE80211_TX_RC_MCS &&
89 + !ieee80211_is_mgmt(hdr->frame_control))
90 + rate = tx_info->control.rates[0].idx + DESC_RATE_MCS0;
91 + else
92 + rate = tx_rate->hw_value;
93 +
94 + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_TX)
95 + dev_info(dev, "%s: TX rate: %d, pkt size %d\n",
96 + __func__, rate, cpu_to_le16(tx_desc->pkt_size));
97 +
98 seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
99
100 tx_desc->txdw5 = cpu_to_le32(rate);
101 @@ -4800,10 +4815,10 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211
102 * rts_rate is zero if RTS/CTS or CTS to SELF are not enabled
103 */
104 tx_desc->txdw4 |= cpu_to_le32(rts_rate << TXDESC32_RTS_RATE_SHIFT);
105 - if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) {
106 + if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
107 tx_desc->txdw4 |= cpu_to_le32(TXDESC32_RTS_CTS_ENABLE);
108 tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE);
109 - } else if (rate_flag & IEEE80211_TX_RC_USE_CTS_PROTECT) {
110 + } else if (rate_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
111 tx_desc->txdw4 |= cpu_to_le32(TXDESC32_CTS_SELF_ENABLE);
112 tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE);
113 }
114 @@ -4814,16 +4829,31 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211
115 * This format is used on 8192eu/8723bu
116 */
117 void
118 -rtl8xxxu_fill_txdesc_v2(struct ieee80211_hdr *hdr,
119 - struct rtl8xxxu_txdesc32 *tx_desc32, u32 rate,
120 - u16 rate_flag, bool sgi, bool short_preamble,
121 - bool ampdu_enable, u32 rts_rate)
122 +rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
123 + struct ieee80211_tx_info *tx_info,
124 + struct rtl8xxxu_txdesc32 *tx_desc32, bool sgi,
125 + bool short_preamble, bool ampdu_enable, u32 rts_rate)
126 {
127 + struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info);
128 + struct rtl8xxxu_priv *priv = hw->priv;
129 + struct device *dev = &priv->udev->dev;
130 struct rtl8xxxu_txdesc40 *tx_desc40;
131 + u32 rate;
132 + u16 rate_flags = tx_info->control.rates[0].flags;
133 u16 seq_number;
134
135 tx_desc40 = (struct rtl8xxxu_txdesc40 *)tx_desc32;
136
137 + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_TX)
138 + dev_info(dev, "%s: TX rate: %d, pkt size %d\n",
139 + __func__, rate, cpu_to_le16(tx_desc40->pkt_size));
140 +
141 + if (rate_flags & IEEE80211_TX_RC_MCS &&
142 + !ieee80211_is_mgmt(hdr->frame_control))
143 + rate = tx_info->control.rates[0].idx + DESC_RATE_MCS0;
144 + else
145 + rate = tx_rate->hw_value;
146 +
147 seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
148
149 tx_desc40->txdw4 = cpu_to_le32(rate);
150 @@ -4854,10 +4884,10 @@ rtl8xxxu_fill_txdesc_v2(struct ieee80211
151 /*
152 * rts_rate is zero if RTS/CTS or CTS to SELF are not enabled
153 */
154 - if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) {
155 + if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
156 tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_RTS_CTS_ENABLE);
157 tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_HW_RTS_ENABLE);
158 - } else if (rate_flag & IEEE80211_TX_RC_USE_CTS_PROTECT) {
159 + } else if (rate_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
160 /*
161 * For some reason the vendor driver doesn't set
162 * TXDESC40_HW_RTS_ENABLE for CTS to SELF
163 @@ -4872,14 +4902,13 @@ static void rtl8xxxu_tx(struct ieee80211
164 {
165 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
166 struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
167 - struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info);
168 struct rtl8xxxu_priv *priv = hw->priv;
169 struct rtl8xxxu_txdesc32 *tx_desc;
170 struct rtl8xxxu_tx_urb *tx_urb;
171 struct ieee80211_sta *sta = NULL;
172 struct ieee80211_vif *vif = tx_info->control.vif;
173 struct device *dev = &priv->udev->dev;
174 - u32 queue, rate, rts_rate;
175 + u32 queue, rts_rate;
176 u16 pktlen = skb->len;
177 u16 seq_number;
178 u16 rate_flag = tx_info->control.rates[0].flags;
179 @@ -4906,10 +4935,6 @@ static void rtl8xxxu_tx(struct ieee80211
180 goto error;
181 }
182
183 - if (rtl8xxxu_debug & RTL8XXXU_DEBUG_TX)
184 - dev_info(dev, "%s: TX rate: %d (%d), pkt size %d\n",
185 - __func__, tx_rate->bitrate, tx_rate->hw_value, pktlen);
186 -
187 if (ieee80211_is_action(hdr->frame_control))
188 rtl8xxxu_dump_action(dev, hdr);
189
190 @@ -4963,12 +4988,6 @@ static void rtl8xxxu_tx(struct ieee80211
191 }
192 }
193
194 - if (rate_flag & IEEE80211_TX_RC_MCS &&
195 - !ieee80211_is_mgmt(hdr->frame_control))
196 - rate = tx_info->control.rates[0].idx + DESC_RATE_MCS0;
197 - else
198 - rate = tx_rate->hw_value;
199 -
200 if (rate_flag & IEEE80211_TX_RC_SHORT_GI ||
201 (ieee80211_is_data_qos(hdr->frame_control) &&
202 sta && sta->ht_cap.cap &
203 @@ -4988,8 +5007,8 @@ static void rtl8xxxu_tx(struct ieee80211
204
205 seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
206
207 - priv->fops->fill_txdesc(hdr, tx_desc, rate, rate_flag, sgi,
208 - short_preamble, ampdu_enable, rts_rate);
209 + priv->fops->fill_txdesc(hw, hdr, tx_info, tx_desc, sgi, short_preamble,
210 + ampdu_enable, rts_rate);
211
212 rtl8xxxu_calc_tx_desc_csum(tx_desc);
213