package/kernel/mac80211/patches/657-0048-rtl8xxxu-Implement-rtl8188eu_power_off.patch

   1 From 3b86cd428cc1338667585d6b6bffdabc6a601c5e Mon Sep 17 00:00:00 2001
   2 From: Jes Sorensen <Jes.Sorensen@redhat.com>
   3 Date: Fri, 26 Aug 2016 16:09:00 -0400
   4 Subject: [PATCH] rtl8xxxu: Implement rtl8188eu_power_off()
   5
   6 This makes the driver match the poweroff sequence of the vendor driver
   7 and allows the firmware to reload correctly upon rmmod/insmod.
   8 However the device still doesn't receive data upon reloading.
   9
  10 Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
  11 ---
  12  .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 136 ++++++++++++++++++++-
  13  .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h  |   2 +
  14  2 files changed, 137 insertions(+), 1 deletion(-)
  15
  16 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
  17 +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
  18 @@ -1191,6 +1191,71 @@ exit:
  19         return ret;
  20  }
  21
  22 +static int rtl8188eu_emu_to_disabled(struct rtl8xxxu_priv *priv)
  23 +{
  24 +       u8 val8;
  25 +
  26 +       /* 0x04[12:11] = 01 enable WL suspend */
  27 +       val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2);
  28 +       val8 &= ~BIT(0);
  29 +       rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8);
  30 +
  31 +       val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
  32 +       val8 |= BIT(7);
  33 +       rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
  34 +
  35 +       return 0;
  36 +}
  37 +
  38 +static int rtl8188eu_active_to_lps(struct rtl8xxxu_priv *priv)
  39 +{
  40 +       struct device *dev = &priv->udev->dev;
  41 +       u8 val8;
  42 +       u16 val16;
  43 +       u32 val32;
  44 +       int retry, retval;
  45 +
  46 +       rtl8xxxu_write8(priv, REG_TXPAUSE, 0x7f);
  47 +
  48 +       retry = 100;
  49 +       retval = -EBUSY;
  50 +       /*
  51 +        * Poll 32 bit wide 0x05f8 for 0x00000000 to ensure no TX is pending.
  52 +        */
  53 +       do {
  54 +               val32 = rtl8xxxu_read32(priv, 0x05f8);
  55 +               if (!val32) {
  56 +                       retval = 0;
  57 +                       break;
  58 +               }
  59 +       } while (retry--);
  60 +
  61 +       if (!retry) {
  62 +               dev_warn(dev, "Failed to flush TX queue\n");
  63 +               retval = -EBUSY;
  64 +               goto out;
  65 +       }
  66 +
  67 +       /* Disable CCK and OFDM, clock gated */
  68 +       val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
  69 +       val8 &= ~SYS_FUNC_BBRSTB;
  70 +       rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
  71 +
  72 +       udelay(2);
  73 +
  74 +       /* Reset MAC TRX */
  75 +       val16 = rtl8xxxu_read16(priv, REG_CR);
  76 +       val16 &= ~(CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | CR_SECURITY_ENABLE);
  77 +       rtl8xxxu_write16(priv, REG_CR, val16);
  78 +
  79 +       val8 = rtl8xxxu_read8(priv, REG_DUAL_TSF_RST);
  80 +       val8 |= DUAL_TSF_TX_OK;
  81 +       rtl8xxxu_write8(priv, REG_DUAL_TSF_RST, val8);
  82 +
  83 +out:
  84 +       return retval;
  85 +}
  86 +
  87  static int rtl8188eu_power_on(struct rtl8xxxu_priv *priv)
  88  {
  89         u16 val16;
  90 @@ -1221,6 +1286,75 @@ exit:
  91         return ret;
  92  }
  93
  94 +void rtl8188eu_power_off(struct rtl8xxxu_priv *priv)
  95 +{
  96 +       u8 val8;
  97 +       u16 val16;
  98 +
  99 +       rtl8xxxu_flush_fifo(priv);
 100 +
 101 +       val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
 102 +       val8 &= ~TX_REPORT_CTRL_TIMER_ENABLE;
 103 +       rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
 104 +
 105 +       /* Turn off RF */
 106 +       rtl8xxxu_write8(priv, REG_RF_CTRL, 0x00);
 107 +
 108 +       rtl8188eu_active_to_lps(priv);
 109 +
 110 +       /* Reset Firmware if running in RAM */
 111 +       if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL)
 112 +               rtl8xxxu_firmware_self_reset(priv);
 113 +
 114 +       /* Reset MCU */
 115 +       val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
 116 +       val16 &= ~SYS_FUNC_CPU_ENABLE;
 117 +       rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
 118 +
 119 +       /* Reset MCU ready status */
 120 +       rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00);
 121 +
 122 +       /* 32K_CTRL looks to be very 8188e specific */
 123 +       val8 = rtl8xxxu_read8(priv, REG_32K_CTRL);
 124 +       val8 &= ~BIT(0);
 125 +       rtl8xxxu_write8(priv, REG_32K_CTRL, val8);
 126 +
 127 +       rtl8188eu_active_to_emu(priv);
 128 +       rtl8188eu_emu_to_disabled(priv);
 129 +
 130 +       /* Reset MCU IO Wrapper */
 131 +       val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
 132 +       val8 &= ~BIT(3);
 133 +       rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
 134 +
 135 +       val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
 136 +       val8 |= BIT(3);
 137 +       rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
 138 +
 139 +       /* Vendor driver refers to GPIO_IN */
 140 +       val8 = rtl8xxxu_read8(priv, REG_GPIO_PIN_CTRL);
 141 +       /* Vendor driver refers to GPIO_OUT */
 142 +       rtl8xxxu_write8(priv, REG_GPIO_PIN_CTRL + 1, val8);
 143 +       rtl8xxxu_write8(priv, REG_GPIO_PIN_CTRL + 2, 0xff);
 144 +
 145 +       val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL);
 146 +       rtl8xxxu_write8(priv, REG_GPIO_IO_SEL + 1, val8 << 4);
 147 +       val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL + 1);
 148 +       rtl8xxxu_write8(priv, REG_GPIO_IO_SEL + 1, val8 | 0x0f);
 149 +
 150 +       /*
 151 +        * Set LNA, TRSW, EX_PA Pin to output mode
 152 +        * Referred to as REG_BB_PAD_CTRL in 8188eu vendor driver
 153 +        */
 154 +       rtl8xxxu_write32(priv, REG_PAD_CTRL1, 0x00080808);
 155 +
 156 +       rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x00);
 157 +
 158 +       val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO);
 159 +       val16 |= APS_FSMCO_ENABLE_POWERDOWN | APS_FSMCO_HW_POWERDOWN;
 160 +       rtl8xxxu_write16(priv, REG_APS_FSMCO, val16);
 161 +}
 162 +
 163  static void rtl8188e_enable_rf(struct rtl8xxxu_priv *priv)
 164  {
 165         rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
 166 @@ -1265,7 +1399,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
 167         .parse_efuse = rtl8188eu_parse_efuse,
 168         .load_firmware = rtl8188eu_load_firmware,
 169         .power_on = rtl8188eu_power_on,
 170 -       .power_off = rtl8xxxu_power_off,
 171 +       .power_off = rtl8188eu_power_off,
 172         .reset_8051 = rtl8188eu_reset_8051,
 173         .llt_init = rtl8xxxu_init_llt_table,
 174         .init_phy_bb = rtl8188eu_init_phy_bb,
 175 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
 176 +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
 177 @@ -418,6 +418,8 @@
 178  #define REG_MBIST_START                        0x0174
 179  #define REG_MBIST_DONE                 0x0178
 180  #define REG_MBIST_FAIL                 0x017c
 181 +/* 8188EU */
 182 +#define REG_32K_CTRL                   0x0194
 183  #define REG_C2HEVT_MSG_NORMAL          0x01a0
 184  /* 8192EU/8723BU/8812 */
 185  #define REG_C2HEVT_CMD_ID_8723B                0x01ae