package/network/config/ltq-vdsl-app/files/dsl_control

   1 #!/bin/sh /etc/rc.common
   2 # Copyright (C) 2012 OpenWrt.org
   3
   4 # needs to start before the atm layer which starts at 50
   5 START=48
   6
   7 EXTRA_COMMANDS="status lucistat"
   8 EXTRA_HELP="    status  Get DSL status information
   9         lucistat  Get status information if lua friendly format"
  10
  11 SERVICE_DAEMONIZE=1
  12 SERVICE_WRITE_PID=1
  13
  14 [ -f /lib/functions/lantiq_dsl.sh ] && . /lib/functions/lantiq_dsl.sh
  15
  16 # G.992.1 Annex A
  17 # G.992.2 Annex A
  18 # G.992.3 Annex A
  19 # G.992.4 Annex A
  20 # G.992.5 Annex A
  21 # G.993.2 Annex A/B/C
  22 xtse_adsl_a="04 01 04 01 00 01 00 00"
  23
  24 # G.992.1 Annex B
  25 # G.992.3 Annex B
  26 # G.992.5 Annex B
  27 # G.993.2 Annex A/B/C
  28 xtse_adsl_b="10 00 10 00 00 04 00 00"
  29
  30 # G.992.1 Annex B
  31 # G.992.3 Annex B
  32 # G.992.3 Annex J
  33 # G.992.5 Annex B
  34 # G.992.5 Annex J
  35 # G.993.2 Annex A/B/C
  36 xtse_adsl_j="10 00 10 40 00 04 01 00"
  37
  38 xtse_vdsl="00 00 00 00 00 00 00 07"
  39
  40 start() {
  41         local annex
  42         local firmware
  43         local xtse
  44         local xtse_adsl
  45         local mode
  46
  47         config_load network
  48         config_get annex dsl annex
  49         config_get firmware dsl firmware
  50         config_get xfer_mode dsl xfer_mode
  51
  52         [ -z "${xfer_mode}" ] && xfer_mode=ptm
  53
  54         case "${xfer_mode}" in
  55         atm)
  56                 insmod ltq_atm_vr9
  57                 mode=1
  58                 ;;
  59         *)
  60                 insmod ltq_ptm_vr9
  61                 mode=2
  62                 ;;
  63         esac
  64
  65         eval "xtse_adsl=\"\${xtse_adsl_$annex}\""
  66         if [ "${xtse_adsl}" ]; then
  67                 xtse=$xtse_adsl
  68         else
  69                 xtse=$xtse_vdsl
  70         fi
  71
  72         [ -z "${firmware}" ] && firmware=/lib/firmware/vdsl.bin
  73         [ -f "${firmware}" ] || {
  74                 echo failed to find $firmware
  75                 return 1
  76         }
  77
  78         service_start /sbin/vdsl_cpe_control \
  79                         -i `echo $xtse | sed "s/ /_/g"` \
  80                         -n /sbin/dsl_notify.sh \
  81                         -f ${firmware} \
  82                         -M ${mode}
  83 }
  84
  85 stop() {
  86         DSL_NOTIFICATION_TYPE="DSL_INTERFACE_STATUS" \
  87         DSL_INTERFACE_STATUS="DOWN" \
  88                 /sbin/dsl_notify.sh
  89
  90         service_stop /sbin/vdsl_cpe_control
  91 }