ipq8065: adjust SS USB PHY power settings
[openwrt/openwrt.git] / package / network / services / authsae / files / lib / wifi / authsae.sh
1 authsae_start_interface() {
2 local mcast_rate
3 local mesh_htmode
4 local mesh_band
5 local authsae_conf_file="/var/run/authsae-$ifname.cfg"
6 local ret=1
7
8 json_get_vars mcast_rate mesh_id
9 set_default mcast_rate "12000"
10
11 case "$htmode" in
12 HT20|HT40+|HT40-) mesh_htmode="$htmode";;
13 *) mesh_htmode="none";;
14 esac
15
16 case "$hwmode" in
17 *g*) mesh_band=11g;;
18 *a*) mesh_band=11a;;
19 esac
20
21 if [ "$mcast_rate" -gt 1000 ]; then
22 # authsae only allows integers as rates and not things like 5.5
23 mcval=$(($mcast_rate / 1000))
24 else
25 # compat: to still support mbit/s rates
26 mcval="$mcast_rate"
27 fi
28
29 cat > "$authsae_conf_file" <<EOF
30 authsae:
31 {
32 sae:
33 {
34 debug = 0;
35 password = "$key";
36 group = [19, 26, 21, 25, 20];
37 blacklist = 5;
38 thresh = 5;
39 lifetime = 3600;
40 };
41 meshd:
42 {
43 meshid = "$mesh_id";
44 interface = "$ifname";
45 passive = 0;
46 debug = 0;
47 mediaopt = 1;
48 band = "$mesh_band";
49 channel = $channel;
50 htmode = "$mesh_htmode";
51 mcast-rate = $mcval;
52 };
53 };
54 EOF
55
56 /usr/bin/meshd-nl80211 -i "$ifname" -s "$mesh_id" -c "$authsae_conf_file" </dev/null >/dev/null 2>/dev/null &
57 authsae_pid="$!"
58 ret="$?"
59
60 echo $authsae_pid > /var/run/authsae-$ifname.pid
61 wireless_add_process "$authsae_pid" "/usr/bin/meshd-nl80211" 1
62
63 [ "$ret" != 0 ] && wireless_setup_vif_failed AUTHSAE_FAILED
64 return $ret
65 }