package/network/services/hostapd/files/netifd.sh

   1 wpa_supplicant_add_rate() {
   2         local var="$1"
   3         local val="$(($2 / 1000))"
   4         local sub="$((($2 / 100) % 10))"
   5         append $var "$val" ","
   6         [ $sub -gt 0 ] && append $var "."
   7 }
   8
   9 hostapd_add_rate() {
  10         local var="$1"
  11         local val="$(($2 / 100))"
  12         append $var "$val" " "
  13 }
  14
  15 hostapd_append_wep_key() {
  16         local var="$1"
  17
  18         wep_keyidx=0
  19         set_default key 1
  20         case "$key" in
  21                 [1234])
  22                         for idx in 1 2 3 4; do
  23                                 local zidx
  24                                 zidx=$(($idx - 1))
  25                                 json_get_var ckey "key${idx}"
  26                                 [ -n "$ckey" ] && \
  27                                         append $var "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N$T"
  28                         done
  29                         wep_keyidx=$((key - 1))
  30                 ;;
  31                 *)
  32                         append $var "wep_key0=$(prepare_key_wep "$key")" "$N$T"
  33                 ;;
  34         esac
  35 }
  36
  37 hostapd_add_log_config() {
  38         config_add_boolean \
  39                 log_80211 \
  40                 log_8021x \
  41                 log_radius \
  42                 log_wpa \
  43                 log_driver \
  44                 log_iapp \
  45                 log_mlme
  46
  47         config_add_int log_level
  48 }
  49
  50 hostapd_common_add_device_config() {
  51         config_add_array basic_rate
  52         config_add_array supported_rates
  53
  54         config_add_string country
  55         config_add_boolean country_ie doth ht_coex
  56         config_add_string require_mode
  57
  58         hostapd_add_log_config
  59 }
  60
  61 hostapd_prepare_device_config() {
  62         local config="$1"
  63         local driver="$2"
  64
  65         local base="${config%%.conf}"
  66         local base_cfg=
  67
  68         json_get_vars country country_ie beacon_int doth require_mode ht_coex
  69
  70         hostapd_set_log_options base_cfg
  71
  72         set_default country_ie 1
  73         set_default doth 1
  74         set_default ht_coex 0
  75
  76         append base_cfg "ht_coex=$ht_coex" "$N"
  77         [ -n "$country" ] && {
  78                 append base_cfg "country_code=$country" "$N"
  79
  80                 [ "$country_ie" -gt 0 ] && append base_cfg "ieee80211d=1" "$N"
  81                 [ "$hwmode" = "a" -a "$doth" -gt 0 ] && append base_cfg "ieee80211h=1" "$N"
  82         }
  83         [ -n "$hwmode" ] && append base_cfg "hw_mode=$hwmode" "$N"
  84
  85         local brlist= br
  86         json_get_values basic_rate_list basic_rate
  87         for br in $basic_rate_list; do
  88                 hostapd_add_rate brlist "$br"
  89         done
  90         case "$require_mode" in
  91                 g) brlist="60 120 240" ;;
  92                 n) append base_cfg "require_ht=1" "$N";;
  93                 ac) append base_cfg "require_vht=1" "$N";;
  94         esac
  95
  96         local rlist= r
  97         json_get_values rate_list supported_rates
  98         for r in $rate_list; do
  99                 hostapd_add_rate rlist "$r"
 100         done
 101
 102         [ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
 103         [ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
 104         [ -n "$beacon_int" ] && append base_cfg "beacon_int=$beacon_int" "$N"
 105
 106         cat > "$config" <<EOF
 107 driver=$driver
 108 $base_cfg
 109 EOF
 110 }
 111
 112 hostapd_common_add_bss_config() {
 113         config_add_string 'bssid:macaddr' 'ssid:string'
 114         config_add_boolean wds wmm uapsd hidden
 115
 116         config_add_int maxassoc max_inactivity
 117         config_add_boolean disassoc_low_ack isolate short_preamble
 118
 119         config_add_int \
 120                 wep_rekey eap_reauth_period \
 121                 wpa_group_rekey wpa_pair_rekey wpa_master_rekey
 122
 123         config_add_boolean rsn_preauth auth_cache
 124         config_add_int ieee80211w
 125
 126         config_add_string 'auth_server:host' 'server:host'
 127         config_add_string auth_secret
 128         config_add_int 'auth_port:port' 'port:port'
 129
 130         config_add_string acct_server
 131         config_add_string acct_secret
 132         config_add_int acct_port
 133
 134         config_add_string dae_client
 135         config_add_string dae_secret
 136         config_add_int dae_port
 137
 138         config_add_string nasid
 139         config_add_string ownip
 140         config_add_string iapp_interface
 141         config_add_string eap_type ca_cert client_cert identity auth priv_key priv_key_pwd
 142
 143         config_add_int dynamic_vlan vlan_naming
 144         config_add_string vlan_tagged_interface vlan_bridge
 145
 146         config_add_string 'key1:wepkey' 'key2:wepkey' 'key3:wepkey' 'key4:wepkey' 'password:wpakey'
 147
 148         config_add_string wpa_psk_file
 149
 150         config_add_boolean wps_pushbutton wps_label ext_registrar wps_pbc_in_m1
 151         config_add_string wps_device_type wps_device_name wps_manufacturer wps_pin
 152
 153         config_add_boolean ieee80211r pmk_r1_push
 154         config_add_int r0_key_lifetime reassociation_deadline
 155         config_add_string mobility_domain r1_key_holder
 156         config_add_array r0kh r1kh
 157
 158         config_add_int ieee80211w_max_timeout ieee80211w_retry_timeout
 159
 160         config_add_string macfilter 'macfile:file'
 161         config_add_array 'maclist:list(macaddr)'
 162
 163         config_add_array bssid_blacklist
 164         config_add_array bssid_whitelist
 165
 166         config_add_int mcast_rate
 167         config_add_array basic_rate
 168         config_add_array supported_rates
 169 }
 170
 171 hostapd_set_bss_options() {
 172         local var="$1"
 173         local phy="$2"
 174         local vif="$3"
 175
 176         wireless_vif_parse_encryption
 177
 178         local bss_conf
 179         local wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_key_mgmt
 180
 181         json_get_vars \
 182                 wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey \
 183                 maxassoc max_inactivity disassoc_low_ack isolate auth_cache \
 184                 wps_pushbutton wps_label ext_registrar wps_pbc_in_m1 \
 185                 wps_device_type wps_device_name wps_manufacturer wps_pin \
 186                 macfilter ssid wmm uapsd hidden short_preamble rsn_preauth \
 187                 iapp_interface
 188
 189         set_default isolate 0
 190         set_default maxassoc 0
 191         set_default max_inactivity 0
 192         set_default short_preamble 1
 193         set_default disassoc_low_ack 1
 194         set_default hidden 0
 195         set_default wmm 1
 196         set_default uapsd 1
 197
 198         append bss_conf "ctrl_interface=/var/run/hostapd"
 199         if [ "$isolate" -gt 0 ]; then
 200                 append bss_conf "ap_isolate=$isolate" "$N"
 201         fi
 202         if [ "$maxassoc" -gt 0 ]; then
 203                 append bss_conf "max_num_sta=$maxassoc" "$N"
 204         fi
 205         if [ "$max_inactivity" -gt 0 ]; then
 206                 append bss_conf "ap_max_inactivity=$max_inactivity" "$N"
 207         fi
 208
 209         append bss_conf "disassoc_low_ack=$disassoc_low_ack" "$N"
 210         append bss_conf "preamble=$short_preamble" "$N"
 211         append bss_conf "wmm_enabled=$wmm" "$N"
 212         append bss_conf "ignore_broadcast_ssid=$hidden" "$N"
 213         append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 214
 215         [ "$wpa" -gt 0 ] && {
 216                 [ -n "$wpa_group_rekey"  ] && append bss_conf "wpa_group_rekey=$wpa_group_rekey" "$N"
 217                 [ -n "$wpa_pair_rekey"   ] && append bss_conf "wpa_ptk_rekey=$wpa_pair_rekey"    "$N"
 218                 [ -n "$wpa_master_rekey" ] && append bss_conf "wpa_gmk_rekey=$wpa_master_rekey"  "$N"
 219         }
 220
 221         case "$auth_type" in
 222                 none)
 223                         wps_possible=1
 224                         # Here we make the assumption that if we're in open mode
 225                         # with WPS enabled, we got to be in unconfigured state.
 226                         wps_not_configured=1
 227                 ;;
 228                 psk)
 229                         json_get_vars key wpa_psk_file
 230                         if [ ${#key} -lt 8 ]; then
 231                                 wireless_setup_vif_failed INVALID_WPA_PSK
 232                                 return 1
 233                         elif [ ${#key} -eq 64 ]; then
 234                                 append bss_conf "wpa_psk=$key" "$N"
 235                         else
 236                                 append bss_conf "wpa_passphrase=$key" "$N"
 237                         fi
 238                         [ -n "$wpa_psk_file" ] && {
 239                                 [ -e "$wpa_psk_file" ] || touch "$wpa_psk_file"
 240                                 append bss_conf "wpa_psk_file=$wpa_psk_file" "$N"
 241                         }
 242                         wps_possible=1
 243                         append wpa_key_mgmt "WPA-PSK"
 244                 ;;
 245                 eap)
 246                         json_get_vars \
 247                                 auth_server auth_secret auth_port \
 248                                 acct_server acct_secret acct_port \
 249                                 dae_client dae_secret dae_port \
 250                                 ownip \
 251                                 eap_reauth_period dynamic_vlan \
 252                                 vlan_naming vlan_tagged_interface \
 253                                 vlan_bridge
 254
 255                         # legacy compatibility
 256                         [ -n "$auth_server" ] || json_get_var auth_server server
 257                         [ -n "$auth_port" ] || json_get_var auth_port port
 258                         [ -n "$auth_secret" ] || json_get_var auth_secret key
 259
 260                         set_default auth_port 1812
 261                         set_default acct_port 1813
 262                         set_default dae_port 3799
 263
 264                         set_default vlan_naming 1
 265
 266                         append bss_conf "auth_server_addr=$auth_server" "$N"
 267                         append bss_conf "auth_server_port=$auth_port" "$N"
 268                         append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
 269
 270                         [ -n "$acct_server" ] && {
 271                                 append bss_conf "acct_server_addr=$acct_server" "$N"
 272                                 append bss_conf "acct_server_port=$acct_port" "$N"
 273                                 [ -n "$acct_secret" ] && \
 274                                         append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
 275                         }
 276
 277                         [ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
 278
 279                         [ -n "$dae_client" -a -n "$dae_secret" ] && {
 280                                 append bss_conf "radius_das_port=$dae_port" "$N"
 281                                 append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
 282                         }
 283
 284                         [ -n "$ownip" ] && append bss_conf "own_ip_addr=$ownip" "$N"
 285                         append bss_conf "eapol_key_index_workaround=1" "$N"
 286                         append bss_conf "ieee8021x=1" "$N"
 287                         append wpa_key_mgmt "WPA-EAP"
 288
 289                         [ -n "$dynamic_vlan" ] && {
 290                                 append bss_conf "dynamic_vlan=$dynamic_vlan" "$N"
 291                                 append bss_conf "vlan_naming=$vlan_naming" "$N"
 292                                 [ -n "$vlan_bridge" ] && \
 293                                         append bss_conf "vlan_bridge=$vlan_bridge" "$N"
 294                                 [ -n "$vlan_tagged_interface" ] && \
 295                                         append bss_conf "vlan_tagged_interface=$vlan_tagged_interface" "$N"
 296                         }
 297                 ;;
 298                 wep)
 299                         local wep_keyidx=0
 300                         json_get_vars key
 301                         hostapd_append_wep_key bss_conf
 302                         append bss_conf "wep_default_key=$wep_keyidx" "$N"
 303                         [ -n "$wep_rekey" ] && append bss_conf "wep_rekey_period=$wep_rekey" "$N"
 304                 ;;
 305         esac
 306
 307         local auth_algs=$((($auth_mode_shared << 1) | $auth_mode_open))
 308         append bss_conf "auth_algs=${auth_algs:-1}" "$N"
 309         append bss_conf "wpa=$wpa" "$N"
 310         [ -n "$wpa_pairwise" ] && append bss_conf "wpa_pairwise=$wpa_pairwise" "$N"
 311
 312         set_default wps_pushbutton 0
 313         set_default wps_label 0
 314         set_default wps_pbc_in_m1 0
 315
 316         config_methods=
 317         [ "$wps_pushbutton" -gt 0 ] && append config_methods push_button
 318         [ "$wps_label" -gt 0 ] && append config_methods label
 319
 320         [ -n "$wps_possible" -a -n "$config_methods" ] && {
 321                 set_default ext_registrar 0
 322                 set_default wps_device_type "6-0050F204-1"
 323                 set_default wps_device_name "OpenWrt AP"
 324                 set_default wps_manufacturer "openwrt.org"
 325
 326                 wps_state=2
 327                 [ -n "$wps_configured" ] && wps_state=1
 328
 329                 [ "$ext_registrar" -gt 0 -a -n "$network_bridge" ] && append bss_conf "upnp_iface=$network_bridge" "$N"
 330
 331                 append bss_conf "eap_server=1" "$N"
 332                 [ -n "$wps_pin" ] && append bss_conf "ap_pin=$wps_pin" "$N"
 333                 append bss_conf "wps_state=$wps_state" "$N"
 334                 append bss_conf "ap_setup_locked=0" "$N"
 335                 append bss_conf "device_type=$wps_device_type" "$N"
 336                 append bss_conf "device_name=$wps_device_name" "$N"
 337                 append bss_conf "manufacturer=$wps_manufacturer" "$N"
 338                 append bss_conf "config_methods=$config_methods" "$N"
 339                 [ "$wps_pbc_in_m1" -gt 0 ] && append bss_conf "pbc_in_m1=$wps_pbc_in_m1" "$N"
 340         }
 341
 342         append bss_conf "ssid=$ssid" "$N"
 343         [ -n "$network_bridge" ] && append bss_conf "bridge=$network_bridge" "$N"
 344         [ -n "$iapp_interface" ] && {
 345                 iapp_interface="$(uci_get_state network "$iapp_interface" ifname "$iapp_interface")"
 346                 [ -n "$iapp_interface" ] && append bss_conf "iapp_interface=$iapp_interface" "$N"
 347         }
 348
 349         if [ "$wpa" -ge "1" ]; then
 350                 json_get_vars nasid ieee80211r
 351                 set_default ieee80211r 0
 352                 [ -n "$nasid" ] && append bss_conf "nas_identifier=$nasid" "$N"
 353
 354                 if [ "$ieee80211r" -gt "0" ]; then
 355                         json_get_vars mobility_domain r0_key_lifetime r1_key_holder \
 356                         reassociation_deadline pmk_r1_push
 357                         json_get_values r0kh r0kh
 358                         json_get_values r1kh r1kh
 359
 360                         set_default mobility_domain "4f57"
 361                         set_default r0_key_lifetime 10000
 362                         set_default r1_key_holder "00004f577274"
 363                         set_default reassociation_deadline 1000
 364                         set_default pmk_r1_push 0
 365
 366                         append bss_conf "mobility_domain=$mobility_domain" "$N"
 367                         append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
 368                         append bss_conf "r1_key_holder=$r1_key_holder" "$N"
 369                         append bss_conf "reassociation_deadline=$reassociation_deadline" "$N"
 370                         append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"
 371
 372                         for kh in $r0kh; do
 373                                 append bss_conf "r0kh=${kh//,/ }" "$N"
 374                         done
 375                         for kh in $r1kh; do
 376                                 append bss_conf "r1kh=${kh//,/ }" "$N"
 377                         done
 378
 379                         [ "$wpa_key_mgmt" != "${wpa_key_mgmt/EAP/}" ] && append wpa_key_mgmt "FT-EAP"
 380                         [ "$wpa_key_mgmt" != "${wpa_key_mgmt/PSK/}" ] && append wpa_key_mgmt "FT-PSK"
 381                 fi
 382
 383                 [ -n "$wpa_key_mgmt" ] && append bss_conf "wpa_key_mgmt=$wpa_key_mgmt" "$N"
 384         fi
 385
 386         if [ "$wpa" -ge "2" ]; then
 387                 if [ -n "$network_bridge" -a "$rsn_preauth" = 1 ]; then
 388                         set_default auth_cache 1
 389                         append bss_conf "rsn_preauth=1" "$N"
 390                         append bss_conf "rsn_preauth_interfaces=$network_bridge" "$N"
 391                 else
 392                         set_default auth_cache 0
 393                 fi
 394
 395                 append bss_conf "okc=$auth_cache" "$N"
 396                 [ "$auth_cache" = 0 ] && append bss_conf "disable_pmksa_caching=1" "$N"
 397
 398                 # RSN -> allow management frame protection
 399                 json_get_var ieee80211w ieee80211w
 400                 case "$ieee80211w" in
 401                         [012])
 402                                 json_get_vars ieee80211w_max_timeout ieee80211w_retry_timeout
 403                                 append bss_conf "ieee80211w=$ieee80211w" "$N"
 404                                 [ "$ieee80211w" -gt "0" ] && {
 405                                         [ -n "$ieee80211w_max_timeout" ] && \
 406                                                 append bss_conf "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N"
 407                                         [ -n "$ieee80211w_retry_timeout" ] && \
 408                                                 append bss_conf "assoc_sa_query_retry_timeout=$ieee80211w_retry_timeout" "$N"
 409                                 }
 410                         ;;
 411                 esac
 412         fi
 413
 414         _macfile="/var/run/hostapd-$ifname.maclist"
 415         case "$macfilter" in
 416                 allow)
 417                         append bss_conf "macaddr_acl=1" "$N"
 418                         append bss_conf "accept_mac_file=$_macfile" "$N"
 419                 ;;
 420                 deny)
 421                         append bss_conf "macaddr_acl=0" "$N"
 422                         append bss_conf "deny_mac_file=$_macfile" "$N"
 423                 ;;
 424                 *)
 425                         _macfile=""
 426                 ;;
 427         esac
 428
 429         [ -n "$_macfile" ] && {
 430                 json_get_vars macfile
 431                 json_get_values maclist maclist
 432
 433                 rm -f "$_macfile"
 434                 (
 435                         for mac in $maclist; do
 436                                 echo "$mac"
 437                         done
 438                         [ -n "$macfile" -a -f "$macfile" ] && cat "$macfile"
 439                 ) > "$_macfile"
 440         }
 441
 442         append "$var" "$bss_conf" "$N"
 443         return 0
 444 }
 445
 446 hostapd_set_log_options() {
 447         local var="$1"
 448
 449         local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
 450         json_get_vars log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
 451
 452         set_default log_level 2
 453         set_default log_80211  1
 454         set_default log_8021x  1
 455         set_default log_radius 1
 456         set_default log_wpa    1
 457         set_default log_driver 1
 458         set_default log_iapp   1
 459         set_default log_mlme   1
 460
 461         local log_mask=$(( \
 462                 ($log_80211  << 0) | \
 463                 ($log_8021x  << 1) | \
 464                 ($log_radius << 2) | \
 465                 ($log_wpa    << 3) | \
 466                 ($log_driver << 4) | \
 467                 ($log_iapp   << 5) | \
 468                 ($log_mlme   << 6)   \
 469         ))
 470
 471         append "$var" "logger_syslog=$log_mask" "$N"
 472         append "$var" "logger_syslog_level=$log_level" "$N"
 473         append "$var" "logger_stdout=$log_mask" "$N"
 474         append "$var" "logger_stdout_level=$log_level" "$N"
 475
 476         return 0
 477 }
 478
 479 _wpa_supplicant_common() {
 480         local ifname="$1"
 481
 482         _rpath="/var/run/wpa_supplicant"
 483         _config="${_rpath}-$ifname.conf"
 484 }
 485
 486 wpa_supplicant_teardown_interface() {
 487         _wpa_supplicant_common "$1"
 488         rm -rf "$_rpath/$1" "$_config"
 489 }
 490
 491 wpa_supplicant_prepare_interface() {
 492         local ifname="$1"
 493         _w_driver="$2"
 494
 495         _wpa_supplicant_common "$1"
 496
 497         json_get_vars mode wds
 498
 499         [ -n "$network_bridge" ] && {
 500                 fail=
 501                 case "$mode" in
 502                         adhoc)
 503                                 fail=1
 504                         ;;
 505                         sta)
 506                                 [ "$wds" = 1 ] || fail=1
 507                         ;;
 508                 esac
 509
 510                 [ -n "$fail" ] && {
 511                         wireless_setup_vif_failed BRIDGE_NOT_ALLOWED
 512                         return 1
 513                 }
 514         }
 515
 516         local ap_scan=
 517
 518         _w_mode="$mode"
 519         _w_modestr=
 520
 521         [[ "$mode" = adhoc ]] && {
 522                 ap_scan="ap_scan=2"
 523
 524                 _w_modestr="mode=1"
 525         }
 526
 527         wpa_supplicant_teardown_interface "$ifname"
 528         cat > "$_config" <<EOF
 529 $ap_scan
 530 EOF
 531         return 0
 532 }
 533
 534 wpa_supplicant_add_network() {
 535         local ifname="$1"
 536
 537         _wpa_supplicant_common "$1"
 538         wireless_vif_parse_encryption
 539
 540         json_get_vars \
 541                 ssid bssid key \
 542                 basic_rate mcast_rate \
 543                 ieee80211w
 544
 545         local key_mgmt='NONE'
 546         local enc_str=
 547         local network_data=
 548         local T="       "
 549
 550         local wpa_key_mgmt="WPA-PSK"
 551         local scan_ssid="scan_ssid=1"
 552         local freq
 553
 554         [[ "$_w_mode" = "adhoc" ]] && {
 555                 append network_data "mode=1" "$N$T"
 556                 [ -n "$channel" ] && {
 557                         freq="$(get_freq "$phy" "$channel")"
 558                         append network_data "fixed_freq=1" "$N$T"
 559                         append network_data "frequency=$freq" "$N$T"
 560                 }
 561
 562                 scan_ssid="scan_ssid=0"
 563
 564                 [ "$_w_driver" = "nl80211" ] || wpa_key_mgmt="WPA-NONE"
 565         }
 566
 567         [[ "$_w_mode" = "mesh" ]] && {
 568                 append network_data "mode=5" "$N$T"
 569                 [ -n "$channel" ] && {
 570                         freq="$(get_freq "$phy" "$channel")"
 571                         append network_data "frequency=$freq" "$N$T"
 572                 }
 573                 wpa_key_mgmt="SAE"
 574                 scan_ssid=""
 575         }
 576
 577         [[ "$_w_mode" = "adhoc" -o "$_w_mode" = "mesh" ]] && append network_data "$_w_modestr" "$N$T"
 578
 579         case "$auth_type" in
 580                 none) ;;
 581                 wep)
 582                         local wep_keyidx=0
 583                         hostapd_append_wep_key network_data
 584                         append network_data "wep_tx_keyidx=$wep_keyidx" "$N$T"
 585                 ;;
 586                 psk)
 587                         local passphrase
 588
 589                         key_mgmt="$wpa_key_mgmt"
 590                         if [ ${#key} -eq 64 ]; then
 591                                 passphrase="psk=${key}"
 592                         else
 593                                 passphrase="psk=\"${key}\""
 594                         fi
 595                         append network_data "$passphrase" "$N$T"
 596                 ;;
 597                 eap)
 598                         key_mgmt='WPA-EAP'
 599
 600                         json_get_vars eap_type identity ca_cert
 601                         [ -n "$ca_cert" ] && append network_data "ca_cert=\"$ca_cert\"" "$N$T"
 602                         [ -n "$identity" ] && append network_data "identity=\"$identity\"" "$N$T"
 603                         case "$eap_type" in
 604                                 tls)
 605                                         json_get_vars client_cert priv_key priv_key_pwd
 606                                         append network_data "client_cert=\"$client_cert\"" "$N$T"
 607                                         append network_data "private_key=\"$priv_key\"" "$N$T"
 608                                         append network_data "private_key_passwd=\"$priv_key_pwd\"" "$N$T"
 609                                 ;;
 610                                 peap|ttls)
 611                                         json_get_vars auth password
 612                                         set_default auth MSCHAPV2
 613                                         append network_data "phase2=\"$auth\"" "$N$T"
 614                                         append network_data "password=\"$password\"" "$N$T"
 615                                 ;;
 616                         esac
 617                         append network_data "eap=$(echo $eap_type | tr 'a-z' 'A-Z')" "$N$T"
 618                 ;;
 619         esac
 620
 621         [ "$mode" = mesh ] || {
 622                 case "$wpa" in
 623                         1)
 624                                 append network_data "proto=WPA" "$N$T"
 625                         ;;
 626                         2)
 627                                 append network_data "proto=RSN" "$N$T"
 628                         ;;
 629                 esac
 630
 631                 case "$ieee80211w" in
 632                         [012])
 633                                 [ "$wpa" -ge 2 ] && append network_data "ieee80211w=$ieee80211w" "$N$T"
 634                         ;;
 635                 esac
 636         }
 637         local beacon_int brates mrate
 638         [ -n "$bssid" ] && append network_data "bssid=$bssid" "$N$T"
 639         [ -n "$beacon_int" ] && append network_data "beacon_int=$beacon_int" "$N$T"
 640
 641         local bssid_blacklist bssid_whitelist
 642         json_get_values bssid_blacklist bssid_blacklist
 643         json_get_values bssid_whitelist bssid_whitelist
 644
 645         [ -n "$bssid_blacklist" ] && append network_data "bssid_blacklist=$bssid_blacklist" "$N$T"
 646         [ -n "$bssid_whitelist" ] && append network_data "bssid_whitelist=$bssid_whitelist" "$N$T"
 647
 648         [ -n "$basic_rate" ] && {
 649                 local br rate_list=
 650                 for br in $basic_rate; do
 651                         wpa_supplicant_add_rate rate_list "$br"
 652                 done
 653                 [ -n "$rate_list" ] && append network_data "rates=$rate_list" "$N$T"
 654         }
 655
 656         [ -n "$mcast_rate" ] && {
 657                 local mc_rate=
 658                 wpa_supplicant_add_rate mc_rate "$mcast_rate"
 659                 append network_data "mcast_rate=$mc_rate" "$N$T"
 660         }
 661
 662         local ht_str
 663         [[ "$_w_mode" = adhoc ]] || ibss_htmode=
 664         [ -n "$ibss_htmode" ] && append network_data "htmode=$ibss_htmode" "$N$T"
 665
 666         cat >> "$_config" <<EOF
 667 network={
 668         $scan_ssid
 669         ssid="$ssid"
 670         key_mgmt=$key_mgmt
 671         $network_data
 672 }
 673 EOF
 674         return 0
 675 }
 676
 677 wpa_supplicant_run() {
 678         local ifname="$1"; shift
 679
 680         _wpa_supplicant_common "$ifname"
 681
 682         /usr/sbin/wpa_supplicant -B \
 683                 ${network_bridge:+-b $network_bridge} \
 684                 -P "/var/run/wpa_supplicant-${ifname}.pid" \
 685                 -D ${_w_driver:-wext} \
 686                 -i "$ifname" \
 687                 -c "$_config" \
 688                 -C "$_rpath" \
 689                 "$@"
 690
 691         ret="$?"
 692         wireless_add_process "$(cat "/var/run/wpa_supplicant-${ifname}.pid")" /usr/sbin/wpa_supplicant 1
 693
 694         [ "$ret" != 0 ] && wireless_setup_vif_failed WPA_SUPPLICANT_FAILED
 695
 696         return $ret
 697 }
 698
 699 hostapd_common_cleanup() {
 700         killall hostapd wpa_supplicant meshd-nl80211
 701 }