hostapd: wpas: add missing config symbols
[openwrt/openwrt.git] / package / network / services / hostapd / files / wpa_supplicant-full.config
1 # Example wpa_supplicant build time configuration
2 #
3 # This file lists the configuration options that are used when building the
4 # wpa_supplicant binary. All lines starting with # are ignored. Configuration
5 # option lines must be commented out complete, if they are not to be included,
6 # i.e., just setting VARIABLE=n is not disabling that variable.
7 #
8 # This file is included in Makefile, so variables like CFLAGS and LIBS can also
9 # be modified from here. In most cases, these lines should use += in order not
10 # to override previous values of the variables.
11
12
13 # Uncomment following two lines and fix the paths if you have installed OpenSSL
14 # or GnuTLS in non-default location
15 #CFLAGS += -I/usr/local/openssl/include
16 #LIBS += -L/usr/local/openssl/lib
17
18 # Some Red Hat versions seem to include kerberos header files from OpenSSL, but
19 # the kerberos files are not in the default include path. Following line can be
20 # used to fix build issues on such systems (krb5.h not found).
21 #CFLAGS += -I/usr/include/kerberos
22
23 # Driver interface for generic Linux wireless extensions
24 # Note: WEXT is deprecated in the current Linux kernel version and no new
25 # functionality is added to it. nl80211-based interface is the new
26 # replacement for WEXT and its use allows wpa_supplicant to properly control
27 # the driver to improve existing functionality like roaming and to support new
28 # functionality.
29 CONFIG_DRIVER_WEXT=y
30
31 # Driver interface for Linux drivers using the nl80211 kernel interface
32 CONFIG_DRIVER_NL80211=y
33
34 # QCA vendor extensions to nl80211
35 #CONFIG_DRIVER_NL80211_QCA=y
36
37 # driver_nl80211.c requires libnl. If you are compiling it yourself
38 # you may need to point hostapd to your version of libnl.
39 #
40 #CFLAGS += -I$<path to libnl include files>
41 #LIBS += -L$<path to libnl library files>
42
43 # Use libnl v2.0 (or 3.0) libraries.
44 #CONFIG_LIBNL20=y
45
46 # Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
47 #CONFIG_LIBNL32=y
48
49
50 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
51 #CONFIG_DRIVER_BSD=y
52 #CFLAGS += -I/usr/local/include
53 #LIBS += -L/usr/local/lib
54 #LIBS_p += -L/usr/local/lib
55 #LIBS_c += -L/usr/local/lib
56
57 # Driver interface for Windows NDIS
58 #CONFIG_DRIVER_NDIS=y
59 #CFLAGS += -I/usr/include/w32api/ddk
60 #LIBS += -L/usr/local/lib
61 # For native build using mingw
62 #CONFIG_NATIVE_WINDOWS=y
63 # Additional directories for cross-compilation on Linux host for mingw target
64 #CFLAGS += -I/opt/mingw/mingw32/include/ddk
65 #LIBS += -L/opt/mingw/mingw32/lib
66 #CC=mingw32-gcc
67 # By default, driver_ndis uses WinPcap for low-level operations. This can be
68 # replaced with the following option which replaces WinPcap calls with NDISUIO.
69 # However, this requires that WZC is disabled (net stop wzcsvc) before starting
70 # wpa_supplicant.
71 # CONFIG_USE_NDISUIO=y
72
73 # Driver interface for wired Ethernet drivers
74 CONFIG_DRIVER_WIRED=y
75
76 # Driver interface for MACsec capable Qualcomm Atheros drivers
77 #CONFIG_DRIVER_MACSEC_QCA=y
78
79 # Driver interface for Linux MACsec drivers
80 #CONFIG_DRIVER_MACSEC_LINUX=y
81
82 # Driver interface for the Broadcom RoboSwitch family
83 #CONFIG_DRIVER_ROBOSWITCH=y
84
85 # Driver interface for no driver (e.g., WPS ER only)
86 #CONFIG_DRIVER_NONE=y
87
88 # Solaris libraries
89 #LIBS += -lsocket -ldlpi -lnsl
90 #LIBS_c += -lsocket
91
92 # Enable IEEE 802.1X Supplicant (automatically included if any EAP method or
93 # MACsec is included)
94 CONFIG_IEEE8021X_EAPOL=y
95
96 # EAP-MD5
97 CONFIG_EAP_MD5=y
98
99 # EAP-MSCHAPv2
100 CONFIG_EAP_MSCHAPV2=y
101
102 # EAP-TLS
103 CONFIG_EAP_TLS=y
104
105 # EAL-PEAP
106 CONFIG_EAP_PEAP=y
107
108 # EAP-TTLS
109 CONFIG_EAP_TTLS=y
110
111 # EAP-FAST
112 CONFIG_EAP_FAST=y
113
114 # EAP-TEAP
115 # Note: The current EAP-TEAP implementation is experimental and should not be
116 # enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
117 # of conflicting statements and missing details and the implementation has
118 # vendor specific workarounds for those and as such, may not interoperate with
119 # any other implementation. This should not be used for anything else than
120 # experimentation and interoperability testing until those issues has been
121 # resolved.
122 #CONFIG_EAP_TEAP=y
123
124 # EAP-GTC
125 CONFIG_EAP_GTC=y
126
127 # EAP-OTP
128 CONFIG_EAP_OTP=y
129
130 # EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
131 #CONFIG_EAP_SIM=y
132
133 # Enable SIM simulator (Milenage) for EAP-SIM
134 #CONFIG_SIM_SIMULATOR=y
135
136 # EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
137 #CONFIG_EAP_PSK=y
138
139 # EAP-pwd (secure authentication using only a password)
140 #CONFIG_EAP_PWD=y
141
142 # EAP-PAX
143 #CONFIG_EAP_PAX=y
144
145 # LEAP
146 CONFIG_EAP_LEAP=y
147
148 # EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
149 #CONFIG_EAP_AKA=y
150
151 # EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
152 # This requires CONFIG_EAP_AKA to be enabled, too.
153 #CONFIG_EAP_AKA_PRIME=y
154
155 # Enable USIM simulator (Milenage) for EAP-AKA
156 #CONFIG_USIM_SIMULATOR=y
157
158 # EAP-SAKE
159 #CONFIG_EAP_SAKE=y
160
161 # EAP-GPSK
162 #CONFIG_EAP_GPSK=y
163 # Include support for optional SHA256 cipher suite in EAP-GPSK
164 #CONFIG_EAP_GPSK_SHA256=y
165
166 # EAP-TNC and related Trusted Network Connect support (experimental)
167 #CONFIG_EAP_TNC=y
168
169 # Wi-Fi Protected Setup (WPS)
170 CONFIG_WPS=y
171 # Enable WPS external registrar functionality
172 #CONFIG_WPS_ER=y
173 # Disable credentials for an open network by default when acting as a WPS
174 # registrar.
175 #CONFIG_WPS_REG_DISABLE_OPEN=y
176 # Enable WPS support with NFC config method
177 #CONFIG_WPS_NFC=y
178
179 # EAP-IKEv2
180 #CONFIG_EAP_IKEV2=y
181
182 # EAP-EKE
183 #CONFIG_EAP_EKE=y
184
185 # MACsec
186 #CONFIG_MACSEC=y
187
188 # PKCS#12 (PFX) support (used to read private key and certificate file from
189 # a file that usually has extension .p12 or .pfx)
190 CONFIG_PKCS12=y
191
192 # Smartcard support (i.e., private key on a smartcard), e.g., with openssl
193 # engine.
194 CONFIG_SMARTCARD=y
195
196 # PC/SC interface for smartcards (USIM, GSM SIM)
197 # Enable this if EAP-SIM or EAP-AKA is included
198 #CONFIG_PCSC=y
199
200 # Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
201 CONFIG_HT_OVERRIDES=y
202
203 # Support VHT overrides (disable VHT, mask MCS rates, etc.)
204 CONFIG_VHT_OVERRIDES=y
205
206 # Development testing
207 #CONFIG_EAPOL_TEST=y
208
209 # Select control interface backend for external programs, e.g, wpa_cli:
210 # unix = UNIX domain sockets (default for Linux/*BSD)
211 # udp = UDP sockets using localhost (127.0.0.1)
212 # udp6 = UDP IPv6 sockets using localhost (::1)
213 # named_pipe = Windows Named Pipe (default for Windows)
214 # udp-remote = UDP sockets with remote access (only for tests systems/purpose)
215 # udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
216 # y = use default (backwards compatibility)
217 # If this option is commented out, control interface is not included in the
218 # build.
219 CONFIG_CTRL_IFACE=y
220
221 # Include support for GNU Readline and History Libraries in wpa_cli.
222 # When building a wpa_cli binary for distribution, please note that these
223 # libraries are licensed under GPL and as such, BSD license may not apply for
224 # the resulting binary.
225 #CONFIG_READLINE=y
226
227 # Include internal line edit mode in wpa_cli. This can be used as a replacement
228 # for GNU Readline to provide limited command line editing and history support.
229 #CONFIG_WPA_CLI_EDIT=y
230
231 # Remove debugging code that is printing out debug message to stdout.
232 # This can be used to reduce the size of the wpa_supplicant considerably
233 # if debugging code is not needed. The size reduction can be around 35%
234 # (e.g., 90 kB).
235 #CONFIG_NO_STDOUT_DEBUG=y
236
237 # Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
238 # 35-50 kB in code size.
239 #CONFIG_NO_WPA=y
240
241 # Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
242 # This option can be used to reduce code size by removing support for
243 # converting ASCII passphrases into PSK. If this functionality is removed, the
244 # PSK can only be configured as the 64-octet hexstring (e.g., from
245 # wpa_passphrase). This saves about 0.5 kB in code size.
246 #CONFIG_NO_WPA_PASSPHRASE=y
247
248 # Simultaneous Authentication of Equals (SAE), WPA3-Personal
249 #CONFIG_SAE=y
250
251 # Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
252 # This can be used if ap_scan=1 mode is never enabled.
253 #CONFIG_NO_SCAN_PROCESSING=y
254
255 # Select configuration backend:
256 # file = text file (e.g., wpa_supplicant.conf; note: the configuration file
257 # path is given on command line, not here; this option is just used to
258 # select the backend that allows configuration files to be used)
259 # winreg = Windows registry (see win_example.reg for an example)
260 CONFIG_BACKEND=file
261
262 # Remove configuration write functionality (i.e., to allow the configuration
263 # file to be updated based on runtime configuration changes). The runtime
264 # configuration can still be changed, the changes are just not going to be
265 # persistent over restarts. This option can be used to reduce code size by
266 # about 3.5 kB.
267 #CONFIG_NO_CONFIG_WRITE=y
268
269 # Remove support for configuration blobs to reduce code size by about 1.5 kB.
270 #CONFIG_NO_CONFIG_BLOBS=y
271
272 # Select program entry point implementation:
273 # main = UNIX/POSIX like main() function (default)
274 # main_winsvc = Windows service (read parameters from registry)
275 # main_none = Very basic example (development use only)
276 #CONFIG_MAIN=main
277
278 # Select wrapper for operating system and C library specific functions
279 # unix = UNIX/POSIX like systems (default)
280 # win32 = Windows systems
281 # none = Empty template
282 #CONFIG_OS=unix
283
284 # Select event loop implementation
285 # eloop = select() loop (default)
286 # eloop_win = Windows events and WaitForMultipleObject() loop
287 #CONFIG_ELOOP=eloop
288
289 # Should we use poll instead of select? Select is used by default.
290 #CONFIG_ELOOP_POLL=y
291
292 # Should we use epoll instead of select? Select is used by default.
293 #CONFIG_ELOOP_EPOLL=y
294
295 # Should we use kqueue instead of select? Select is used by default.
296 #CONFIG_ELOOP_KQUEUE=y
297
298 # Select layer 2 packet implementation
299 # linux = Linux packet socket (default)
300 # pcap = libpcap/libdnet/WinPcap
301 # freebsd = FreeBSD libpcap
302 # winpcap = WinPcap with receive thread
303 # ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
304 # none = Empty template
305 #CONFIG_L2_PACKET=linux
306
307 # Disable Linux packet socket workaround applicable for station interface
308 # in a bridge for EAPOL frames. This should be uncommented only if the kernel
309 # is known to not have the regression issue in packet socket behavior with
310 # bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
311 CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
312
313 # IEEE 802.11w (management frame protection), also known as PMF
314 # Driver support is also needed for IEEE 802.11w.
315 #CONFIG_IEEE80211W=y
316
317 # Support Operating Channel Validation
318 #CONFIG_OCV=y
319
320 # Select TLS implementation
321 # openssl = OpenSSL (default)
322 # gnutls = GnuTLS
323 # internal = Internal TLSv1 implementation (experimental)
324 # linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
325 # none = Empty template
326 CONFIG_TLS=internal
327
328 # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
329 # can be enabled to get a stronger construction of messages when block ciphers
330 # are used. It should be noted that some existing TLS v1.0 -based
331 # implementation may not be compatible with TLS v1.1 message (ClientHello is
332 # sent prior to negotiating which version will be used)
333 #CONFIG_TLSV11=y
334
335 # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
336 # can be enabled to enable use of stronger crypto algorithms. It should be
337 # noted that some existing TLS v1.0 -based implementation may not be compatible
338 # with TLS v1.2 message (ClientHello is sent prior to negotiating which version
339 # will be used)
340 #CONFIG_TLSV12=y
341
342 # Select which ciphers to use by default with OpenSSL if the user does not
343 # specify them.
344 #CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
345
346 # If CONFIG_TLS=internal is used, additional library and include paths are
347 # needed for LibTomMath. Alternatively, an integrated, minimal version of
348 # LibTomMath can be used. See beginning of libtommath.c for details on benefits
349 # and drawbacks of this option.
350 CONFIG_INTERNAL_LIBTOMMATH=y
351 #ifndef CONFIG_INTERNAL_LIBTOMMATH
352 #LTM_PATH=/usr/src/libtommath-0.39
353 #CFLAGS += -I$(LTM_PATH)
354 #LIBS += -L$(LTM_PATH)
355 #LIBS_p += -L$(LTM_PATH)
356 #endif
357 # At the cost of about 4 kB of additional binary size, the internal LibTomMath
358 # can be configured to include faster routines for exptmod, sqr, and div to
359 # speed up DH and RSA calculation considerably
360 CONFIG_INTERNAL_LIBTOMMATH_FAST=y
361
362 # Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
363 # This is only for Windows builds and requires WMI-related header files and
364 # WbemUuid.Lib from Platform SDK even when building with MinGW.
365 #CONFIG_NDIS_EVENTS_INTEGRATED=y
366 #PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
367
368 # Add support for new DBus control interface
369 # (fi.w1.hostap.wpa_supplicant1)
370 #CONFIG_CTRL_IFACE_DBUS_NEW=y
371
372 # Add introspection support for new DBus control interface
373 #CONFIG_CTRL_IFACE_DBUS_INTRO=y
374
375 # Add support for loading EAP methods dynamically as shared libraries.
376 # When this option is enabled, each EAP method can be either included
377 # statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
378 # Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
379 # be loaded in the beginning of the wpa_supplicant configuration file
380 # (see load_dynamic_eap parameter in the example file) before being used in
381 # the network blocks.
382 #
383 # Note that some shared parts of EAP methods are included in the main program
384 # and in order to be able to use dynamic EAP methods using these parts, the
385 # main program must have been build with the EAP method enabled (=y or =dyn).
386 # This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
387 # unless at least one of them was included in the main build to force inclusion
388 # of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
389 # in the main build to be able to load these methods dynamically.
390 #
391 # Please also note that using dynamic libraries will increase the total binary
392 # size. Thus, it may not be the best option for targets that have limited
393 # amount of memory/flash.
394 #CONFIG_DYNAMIC_EAP_METHODS=y
395
396 # IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
397 CONFIG_IEEE80211R=y
398
399 # Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
400 #CONFIG_DEBUG_FILE=y
401
402 # Send debug messages to syslog instead of stdout
403 CONFIG_DEBUG_SYSLOG=y
404 # Set syslog facility for debug messages
405 CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
406
407 # Add support for sending all debug messages (regardless of debug verbosity)
408 # to the Linux kernel tracing facility. This helps debug the entire stack by
409 # making it easy to record everything happening from the driver up into the
410 # same file, e.g., using trace-cmd.
411 #CONFIG_DEBUG_LINUX_TRACING=y
412
413 # Add support for writing debug log to Android logcat instead of standard
414 # output
415 #CONFIG_ANDROID_LOG=y
416
417 # Enable privilege separation (see README 'Privilege separation' for details)
418 #CONFIG_PRIVSEP=y
419
420 # Enable mitigation against certain attacks against TKIP by delaying Michael
421 # MIC error reports by a random amount of time between 0 and 60 seconds
422 #CONFIG_DELAYED_MIC_ERROR_REPORT=y
423
424 # Enable tracing code for developer debugging
425 # This tracks use of memory allocations and other registrations and reports
426 # incorrect use with a backtrace of call (or allocation) location.
427 #CONFIG_WPA_TRACE=y
428 # For BSD, uncomment these.
429 #LIBS += -lexecinfo
430 #LIBS_p += -lexecinfo
431 #LIBS_c += -lexecinfo
432
433 # Use libbfd to get more details for developer debugging
434 # This enables use of libbfd to get more detailed symbols for the backtraces
435 # generated by CONFIG_WPA_TRACE=y.
436 #CONFIG_WPA_TRACE_BFD=y
437 # For BSD, uncomment these.
438 #LIBS += -lbfd -liberty -lz
439 #LIBS_p += -lbfd -liberty -lz
440 #LIBS_c += -lbfd -liberty -lz
441
442 # wpa_supplicant depends on strong random number generation being available
443 # from the operating system. os_get_random() function is used to fetch random
444 # data when needed, e.g., for key generation. On Linux and BSD systems, this
445 # works by reading /dev/urandom. It should be noted that the OS entropy pool
446 # needs to be properly initialized before wpa_supplicant is started. This is
447 # important especially on embedded devices that do not have a hardware random
448 # number generator and may by default start up with minimal entropy available
449 # for random number generation.
450 #
451 # As a safety net, wpa_supplicant is by default trying to internally collect
452 # additional entropy for generating random data to mix in with the data fetched
453 # from the OS. This by itself is not considered to be very strong, but it may
454 # help in cases where the system pool is not initialized properly. However, it
455 # is very strongly recommended that the system pool is initialized with enough
456 # entropy either by using hardware assisted random number generator or by
457 # storing state over device reboots.
458 #
459 # wpa_supplicant can be configured to maintain its own entropy store over
460 # restarts to enhance random number generation. This is not perfect, but it is
461 # much more secure than using the same sequence of random numbers after every
462 # reboot. This can be enabled with -e<entropy file> command line option. The
463 # specified file needs to be readable and writable by wpa_supplicant.
464 #
465 # If the os_get_random() is known to provide strong random data (e.g., on
466 # Linux/BSD, the board in question is known to have reliable source of random
467 # data from /dev/urandom), the internal wpa_supplicant random pool can be
468 # disabled. This will save some in binary size and CPU use. However, this
469 # should only be considered for builds that are known to be used on devices
470 # that meet the requirements described above.
471 CONFIG_NO_RANDOM_POOL=y
472
473 # Should we attempt to use the getrandom(2) call that provides more reliable
474 # yet secure randomness source than /dev/random on Linux 3.17 and newer.
475 # Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
476 CONFIG_GETRANDOM=y
477
478 # IEEE 802.11n (High Throughput) support (mainly for AP mode)
479 #CONFIG_IEEE80211N=y
480
481 # IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
482 # (depends on CONFIG_IEEE80211N)
483 #CONFIG_IEEE80211AC=y
484
485 # Wireless Network Management (IEEE Std 802.11v-2011)
486 # Note: This is experimental and not complete implementation.
487 CONFIG_WNM=y
488
489 # Interworking (IEEE 802.11u)
490 # This can be used to enable functionality to improve interworking with
491 # external networks (GAS/ANQP to learn more about the networks and network
492 # selection based on available credentials).
493 CONFIG_INTERWORKING=y
494
495 # Hotspot 2.0
496 CONFIG_HS20=y
497
498 # Enable interface matching in wpa_supplicant
499 #CONFIG_MATCH_IFACE=y
500
501 # Disable roaming in wpa_supplicant
502 #CONFIG_NO_ROAMING=y
503
504 # AP mode operations with wpa_supplicant
505 # This can be used for controlling AP mode operations with wpa_supplicant. It
506 # should be noted that this is mainly aimed at simple cases like
507 # WPA2-Personal while more complex configurations like WPA2-Enterprise with an
508 # external RADIUS server can be supported with hostapd.
509 #CONFIG_AP=y
510
511 # P2P (Wi-Fi Direct)
512 # This can be used to enable P2P support in wpa_supplicant. See README-P2P for
513 # more information on P2P operations.
514 #CONFIG_P2P=y
515
516 # Enable TDLS support
517 #CONFIG_TDLS=y
518
519 # Wi-Fi Display
520 # This can be used to enable Wi-Fi Display extensions for P2P using an external
521 # program to control the additional information exchanges in the messages.
522 #CONFIG_WIFI_DISPLAY=y
523
524 # Autoscan
525 # This can be used to enable automatic scan support in wpa_supplicant.
526 # See wpa_supplicant.conf for more information on autoscan usage.
527 #
528 # Enabling directly a module will enable autoscan support.
529 # For exponential module:
530 #CONFIG_AUTOSCAN_EXPONENTIAL=y
531 # For periodic module:
532 #CONFIG_AUTOSCAN_PERIODIC=y
533
534 # Password (and passphrase, etc.) backend for external storage
535 # These optional mechanisms can be used to add support for storing passwords
536 # and other secrets in external (to wpa_supplicant) location. This allows, for
537 # example, operating system specific key storage to be used
538 #
539 # External password backend for testing purposes (developer use)
540 #CONFIG_EXT_PASSWORD_TEST=y
541
542 # Enable Fast Session Transfer (FST)
543 #CONFIG_FST=y
544
545 # Enable CLI commands for FST testing
546 #CONFIG_FST_TEST=y
547
548 # OS X builds. This is only for building eapol_test.
549 #CONFIG_OSX=y
550
551 # Automatic Channel Selection
552 # This will allow wpa_supplicant to pick the channel automatically when channel
553 # is set to "0".
554 #
555 # TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative
556 # to "channel=0". This would enable us to eventually add other ACS algorithms in
557 # similar way.
558 #
559 # Automatic selection is currently only done through initialization, later on
560 # we hope to do background checks to keep us moving to more ideal channels as
561 # time goes by. ACS is currently only supported through the nl80211 driver and
562 # your driver must have survey dump capability that is filled by the driver
563 # during scanning.
564 #
565 # TODO: In analogy to hostapd be able to customize the ACS survey algorithm with
566 # a newly to create wpa_supplicant.conf variable acs_num_scans.
567 #
568 # Supported ACS drivers:
569 # * ath9k
570 # * ath5k
571 # * ath10k
572 #
573 # For more details refer to:
574 # http://wireless.kernel.org/en/users/Documentation/acs
575 #CONFIG_ACS=y
576
577 # Support Multi Band Operation
578 #CONFIG_MBO=y
579
580 # Fast Initial Link Setup (FILS) (IEEE 802.11ai)
581 #CONFIG_FILS=y
582 # FILS shared key authentication with PFS
583 #CONFIG_FILS_SK_PFS=y
584
585 # Support RSN on IBSS networks
586 # This is needed to be able to use mode=1 network profile with proto=RSN and
587 # key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None).
588 CONFIG_IBSS_RSN=y
589
590 # External PMKSA cache control
591 # This can be used to enable control interface commands that allow the current
592 # PMKSA cache entries to be fetched and new entries to be added.
593 #CONFIG_PMKSA_CACHE_EXTERNAL=y
594
595 # Mesh Networking (IEEE 802.11s)
596 #CONFIG_MESH=y
597
598 # Background scanning modules
599 # These can be used to request wpa_supplicant to perform background scanning
600 # operations for roaming within an ESS (same SSID). See the bgscan parameter in
601 # the wpa_supplicant.conf file for more details.
602 # Periodic background scans based on signal strength
603 #CONFIG_BGSCAN_SIMPLE=y
604 # Learn channels used by the network and try to avoid bgscans on other
605 # channels (experimental)
606 #CONFIG_BGSCAN_LEARN=y
607
608 # Opportunistic Wireless Encryption (OWE)
609 # Experimental implementation of draft-harkins-owe-07.txt
610 #CONFIG_OWE=y
611
612 # Device Provisioning Protocol (DPP)
613 # This requires CONFIG_IEEE80211W=y to be enabled, too. (see
614 # wpa_supplicant/README-DPP for details)
615 #CONFIG_DPP=y
616
617 # uBus IPC/RPC System
618 # Services can connect to the bus and provide methods
619 # that can be called by other services or clients.
620 CONFIG_UBUS=y
621
622 # OpenWrt patch 380-disable-ctrl-iface-mib.patch
623 # leads to the MIB only being compiled in if
624 # CONFIG_CTRL_IFACE_MIB is enabled.
625 CONFIG_CTRL_IFACE_MIB=y