uqmi: also try newer pin verification
[openwrt/openwrt.git] / package / network / utils / uqmi / files / lib / netifd / proto / qmi.sh
1 #!/bin/sh
2
3 [ -n "$INCLUDE_ONLY" ] || {
4 . /lib/functions.sh
5 . ../netifd-proto.sh
6 init_proto "$@"
7 }
8
9 proto_qmi_init_config() {
10 available=1
11 no_device=1
12 proto_config_add_string "device:device"
13 proto_config_add_string apn
14 proto_config_add_string auth
15 proto_config_add_string username
16 proto_config_add_string password
17 proto_config_add_string pincode
18 proto_config_add_int delay
19 proto_config_add_string modes
20 proto_config_add_string pdptype
21 proto_config_add_int profile
22 proto_config_add_boolean dhcpv6
23 proto_config_add_boolean autoconnect
24 proto_config_add_int plmn
25 proto_config_add_defaults
26 }
27
28 proto_qmi_setup() {
29 local interface="$1"
30
31 local device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect plmn $PROTO_DEFAULT_OPTIONS
32 local cid_4 pdh_4 cid_6 pdh_6
33 local ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6
34 json_get_vars device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect plmn $PROTO_DEFAULT_OPTIONS
35
36 [ "$metric" = "" ] && metric="0"
37
38 [ -n "$ctl_device" ] && device=$ctl_device
39
40 [ -n "$device" ] || {
41 echo "No control device specified"
42 proto_notify_error "$interface" NO_DEVICE
43 proto_set_available "$interface" 0
44 return 1
45 }
46
47 device="$(readlink -f $device)"
48 [ -c "$device" ] || {
49 echo "The specified control device does not exist"
50 proto_notify_error "$interface" NO_DEVICE
51 proto_set_available "$interface" 0
52 return 1
53 }
54
55 devname="$(basename "$device")"
56 devpath="$(readlink -f /sys/class/usbmisc/$devname/device/)"
57 ifname="$( ls "$devpath"/net )"
58 [ -n "$ifname" ] || {
59 echo "The interface could not be found."
60 proto_notify_error "$interface" NO_IFACE
61 proto_set_available "$interface" 0
62 return 1
63 }
64
65 [ -n "$delay" ] && sleep "$delay"
66
67 while uqmi -s -d "$device" --get-pin-status | grep '"UIM uninitialized"' > /dev/null; do
68 sleep 1;
69 done
70
71 [ -n "$pincode" ] && {
72 uqmi -s -d "$device" --verify-pin1 "$pincode" || uqmi -s -d "$device" --uim-verify-pin1 "$pincode" || {
73 echo "Unable to verify PIN"
74 proto_notify_error "$interface" PIN_FAILED
75 proto_block_restart "$interface"
76 return 1
77 }
78 }
79
80 [ -n "$plmn" ] && {
81 local mcc mnc
82 if [ "$plmn" = 0 ]; then
83 mcc=0
84 mnc=0
85 echo "Setting PLMN to auto"
86 else
87 mcc=${plmn:0:3}
88 mnc=${plmn:3}
89 echo "Setting PLMN to $plmn"
90 fi
91 uqmi -s -d "$device" --set-plmn --mcc "$mcc" --mnc "$mnc" || {
92 echo "Unable to set PLMN"
93 proto_notify_error "$interface" PLMN_FAILED
94 proto_block_restart "$interface"
95 return 1
96 }
97 }
98
99 uqmi -s -d "$device" --set-data-format 802.3
100 uqmi -s -d "$device" --wda-set-data-format 802.3
101 uqmi -s -d "$device" --sync
102
103 echo "Waiting for network registration"
104 while uqmi -s -d "$device" --get-serving-system | grep '"searching"' > /dev/null; do
105 sleep 5;
106 done
107
108 [ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes"
109
110 echo "Starting network $interface"
111
112 pdptype=`echo "$pdptype" | awk '{print tolower($0)}'`
113 [ "$pdptype" = "ip" -o "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] || pdptype="ip"
114
115 if [ "$pdptype" = "ip" ]; then
116 [ -z "$autoconnect" ] && autoconnect=1
117 [ "$autoconnect" = 0 ] && autoconnect=""
118 else
119 [ "$autoconnect" = 1 ] || autoconnect=""
120 fi
121
122 [ "$pdptype" = "ip" -o "$pdptype" = "ipv4v6" ] && {
123 cid_4=`uqmi -s -d "$device" --get-client-id wds`
124 [ $? -ne 0 ] && {
125 echo "Unable to obtain client ID"
126 proto_notify_error "$interface" NO_CID
127 return 1
128 }
129
130 uqmi -s -d "$device" --set-client-id wds,"$cid_4" --set-ip-family ipv4 > /dev/null
131
132 # try to clear previous autoconnect state
133 uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
134 --stop-network 0xffffffff \
135 --autoconnect > /dev/null
136
137 pdh_4=`uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
138 --start-network \
139 ${apn:+--apn $apn} \
140 ${profile:+--profile $profile} \
141 ${auth:+--auth-type $auth} \
142 ${username:+--username $username} \
143 ${password:+--password $password} \
144 ${autoconnect:+--autoconnect}`
145 [ $? -ne 0 ] && {
146 echo "Unable to connect IPv4"
147 uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds
148 proto_notify_error "$interface" CALL_FAILED
149 return 1
150 }
151 }
152
153 [ "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] && {
154 cid_6=`uqmi -s -d "$device" --get-client-id wds`
155 [ $? -ne 0 ] && {
156 echo "Unable to obtain client ID"
157 proto_notify_error "$interface" NO_CID
158 return 1
159 }
160
161 uqmi -s -d "$device" --set-client-id wds,"$cid_6" --set-ip-family ipv6 > /dev/null
162
163 # try to clear previous autoconnect state
164 uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
165 --stop-network 0xffffffff \
166 --autoconnect > /dev/null
167
168 pdh_6=`uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
169 --start-network \
170 ${apn:+--apn $apn} \
171 ${profile:+--profile $profile} \
172 ${auth:+--auth-type $auth} \
173 ${username:+--username $username} \
174 ${password:+--password $password} \
175 ${autoconnect:+--autoconnect}`
176 [ $? -ne 0 ] && {
177 echo "Unable to connect IPv6"
178 uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds
179 proto_notify_error "$interface" CALL_FAILED
180 return 1
181 }
182 }
183
184 echo "Setting up $ifname"
185 proto_init_update "$ifname" 1
186 proto_set_keep 1
187 proto_add_data
188 [ -n "$pdh_4" ] && {
189 json_add_string "cid_4" "$cid_4"
190 json_add_string "pdh_4" "$pdh_4"
191 }
192 [ -n "$pdh_6" ] && {
193 json_add_string "cid_6" "$cid_6"
194 json_add_string "pdh_6" "$pdh_6"
195 }
196 proto_close_data
197 proto_send_update "$interface"
198 [ -n "$pdh_6" ] && {
199 if [ -z "$dhcpv6" -o "$dhcpv6" = 0 ]; then
200 json_load "$(uqmi -s -d $device --set-client-id wds,$cid_6 --get-current-settings)"
201 json_select ipv6
202 json_get_var ip_6 ip
203 json_get_var gateway_6 gateway
204 json_get_var dns1_6 dns1
205 json_get_var dns2_6 dns2
206 json_get_var ip_prefix_length ip-prefix-length
207
208 proto_init_update "$ifname" 1
209 proto_set_keep 1
210 proto_add_ipv6_address "$ip_6" "128"
211 proto_add_ipv6_prefix "${ip_6}/${ip_prefix_length}"
212 proto_add_ipv6_route "$gateway_6" "128"
213 [ "$defaultroute" = 0 ] || proto_add_ipv6_route "::0" 0 "$gateway_6" "" "" "${ip_6}/${ip_prefix_length}"
214 [ "$peerdns" = 0 ] || {
215 proto_add_dns_server "$dns1_6"
216 proto_add_dns_server "$dns2_6"
217 }
218 proto_send_update "$interface"
219 else
220 json_init
221 json_add_string name "${interface}_6"
222 json_add_string ifname "@$interface"
223 json_add_string proto "dhcpv6"
224 proto_add_dynamic_defaults
225 # RFC 7278: Extend an IPv6 /64 Prefix to LAN
226 json_add_string extendprefix 1
227 json_close_object
228 ubus call network add_dynamic "$(json_dump)"
229 fi
230 }
231
232 [ -n "$pdh_4" ] && {
233 json_init
234 json_add_string name "${interface}_4"
235 json_add_string ifname "@$interface"
236 json_add_string proto "dhcp"
237 proto_add_dynamic_defaults
238 json_close_object
239 ubus call network add_dynamic "$(json_dump)"
240 }
241 }
242
243 qmi_wds_stop() {
244 local cid="$1"
245 local pdh="$2"
246
247 [ -n "$cid" ] || return
248
249 uqmi -s -d "$device" --set-client-id wds,"$cid" \
250 --stop-network 0xffffffff \
251 --autoconnect > /dev/null
252
253 [ -n "$pdh" ] && uqmi -s -d "$device" --set-client-id wds,"$cid" --stop-network "$pdh"
254 uqmi -s -d "$device" --set-client-id wds,"$cid" --release-client-id wds
255 }
256
257 proto_qmi_teardown() {
258 local interface="$1"
259
260 local device cid_4 pdh_4 cid_6 pdh_6
261 json_get_vars device
262
263 [ -n "$ctl_device" ] && device=$ctl_device
264
265 echo "Stopping network $interface"
266
267 json_load "$(ubus call network.interface.$interface status)"
268 json_select data
269 json_get_vars cid_4 pdh_4 cid_6 pdh_6
270
271 qmi_wds_stop "$cid_4" "$pdh_4"
272 qmi_wds_stop "$cid_6" "$pdh_6"
273
274 proto_init_update "*" 0
275 proto_send_update "$interface"
276 }
277
278 [ -n "$INCLUDE_ONLY" ] || {
279 add_protocol qmi
280 }