scripts/qemustart

   1 #!/usr/bin/env bash
   2
   3 SELF="$0"
   4
   5 # Linux bridge for connecting lan and wan network of guest machines
   6 BR_LAN="${BR_LAN:-br-lan}"
   7 BR_WAN="${BR_WAN:-br-wan}"
   8
   9 # Host network interface providing internet access for guest machines
  10 IF_INET="${IF_INET:-eth0}"
  11
  12 # qemu-bridge-helper does two things here
  13 #
  14 # - create tap interface
  15 # - add the tap interface to bridge
  16 #
  17 # as such it requires CAP_NET_ADMIN to do its job.  It will be convenient to
  18 # have it as a root setuid program.  Be aware of the security risks implied
  19 #
  20 # the helper has an acl list which defaults to deny all bridge.  we need to add
  21 # $BR_LAN and $BR_WAN to its allow list
  22 #
  23 #       # sudo vim /etc/qemu/bridge.conf
  24 #       allow br-lan
  25 #       allow br-wan
  26 #
  27 # Other allowed directives can be 'allow all', 'deny all', 'include xxx',  See
  28 # qemu-bridge-helper.c of qemu source code for details.
  29 #
  30 # The helper can be provided by package qemu-system-common on debian, or
  31 # qemu-kvm-common on rhel
  32 #
  33 HELPER="${HELPER:-/usr/libexec/qemu-bridge-helper}"
  34
  35 ### end of global settings
  36
  37 __errmsg() {
  38         echo "$*" >&2
  39 }
  40
  41 do_setup() {
  42         # setup bridge for LAN network
  43         sudo ip link add dev "$BR_LAN" type bridge
  44         sudo ip link set dev "$BR_LAN" up
  45         sudo ip addr add 192.168.1.3/24 dev "$BR_LAN"
  46
  47         # setup bridge for WAN network
  48         #
  49         # minimal dnsmasq config for configuring guest wan network with dhcp
  50         #
  51         #       # sudo apt-get install dnsmasq
  52         #       # sudo vi /etc/dnsmasq.conf
  53         #       interface=br-wan
  54         #       dhcp-range=192.168.7.50,192.168.7.150,255.255.255.0,30m
  55         #
  56         sudo ip link add dev "$BR_WAN" type bridge
  57         sudo ip link set dev "$BR_WAN" up
  58         sudo ip addr add 192.168.7.1/24 dev "$BR_WAN"
  59
  60         # guest internet access
  61         sudo sysctl -w "net.ipv4.ip_forward=1"
  62         sudo sysctl -w "net.ipv4.conf.$BR_WAN.proxy_arp=1"
  63         while sudo iptables -t nat -D POSTROUTING -o "$IF_INET" -j MASQUERADE 2>/dev/null; do true; done
  64               sudo iptables -t nat -A POSTROUTING -o "$IF_INET" -j MASQUERADE
  65 }
  66
  67 check_setup_() {
  68         ip link show "$BR_LAN" >/dev/null || return 1
  69         ip link show "$BR_WAN" >/dev/null || return 1
  70         [ -x "$HELPER" ] || {
  71                 __errmsg "helper $HELPER is not an executable"
  72                 return 1
  73         }
  74 }
  75
  76 check_setup() {
  77         check_setup_ || {
  78                 __errmsg "please check the script content to see the environment requirement"
  79                 return 1
  80         }
  81 }
  82 #do_setup; check_setup; exit $?
  83
  84 usage() {
  85         cat >&2 <<EOF
  86 Usage: $SELF [-h|--help]
  87        $SELF <target>
  88          [<subtarget> [<extra-qemu-options>]]
  89          [--kernel <kernel>]
  90          [--rootfs <rootfs>]
  91
  92 <subtarget> will default to "generic" and must be specified if
  93 <extra-qemu-options> are present
  94
  95 e.g. <subtarget> for malta can be le, be, le64, be64, le-glibc, le64-glibc, etc
  96
  97 <kernel>, <rootfs> can be required or optional arguments to qemu depending on
  98 the actual <target> in use.  They will default to files under bin/targets/
  99
 100 Examples
 101
 102   $SELF x86 64
 103   $SELF x86 64 -enable-kvm -device virtio-balloon-pci
 104   $SELF x86 64 -incoming tcp:0:4444
 105   $SELF x86 64-glibc
 106   $SELF malta be -m 64
 107   $SELF malta le64
 108   $SELF malta be-glibc
 109   $SELF armvirt 32 \\
 110                 --kernel bin/targets/armvirt/32/openwrt-armvirt-32-zImage \\
 111                 --rootfs bin/targets/armvirt/32/openwrt-armvirt-32-root.ext4
 112 EOF
 113 }
 114
 115 rand_mac() {
 116         hexdump -n 3 -e '"52:54:00:" 2/1 "%02x:" 1/1 "%02x"' /dev/urandom
 117 }
 118
 119 parse_args() {
 120         o_qemu_extra=()
 121         while [ "$#" -gt 0 ]; do
 122                 case "$1" in
 123                         --kernel) o_kernel="$2"; shift 2 ;;
 124                         --rootfs) o_rootfs="$2"; shift 2 ;;
 125                         --help|-h)
 126                                 usage
 127                                 exit 0
 128                                 ;;
 129                         *)
 130                                 if [ -z "$o_target" ]; then
 131                                         o_target="$1"
 132                                 elif [ -z "$o_subtarget" ]; then
 133                                         o_subtarget="$1"
 134                                 else
 135                                         o_qemu_extra+=("$1")
 136                                 fi
 137                                 shift
 138                                 ;;
 139                 esac
 140         done
 141
 142         MAC_LAN="$(rand_mac)"
 143         MAC_WAN="$(rand_mac)"
 144         [ -n "$o_target" ] || {
 145                 usage
 146                 return 1
 147         }
 148         [ -n "$o_subtarget" ] || o_subtarget="generic"
 149         o_bindir="bin/targets/$o_target/$o_subtarget"
 150 }
 151
 152 start_qemu_armvirt() {
 153         local kernel="$o_kernel"
 154         local rootfs="$o_rootfs"
 155         local cpu
 156         local qemu_exe
 157
 158         case "${o_subtarget%-*}" in
 159                 32)
 160                         qemu_exe="qemu-system-arm"
 161                         cpu="cortex-a15"
 162                         [ -n "$kernel" ] || kernel="$o_bindir/openwrt-$o_target-${o_subtarget%-*}-zImage-initramfs"
 163                         ;;
 164                 64)
 165                         qemu_exe="qemu-system-aarch64"
 166                         cpu="cortex-a57"
 167                         [ -n "$kernel" ] || kernel="$o_bindir/openwrt-$o_target-${o_subtarget%-*}-Image-initramfs"
 168                         ;;
 169                 *)
 170                         __errmsg "target $o_target: unknown subtarget $o_subtarget"
 171                         return 1
 172                         ;;
 173         esac
 174         [ -z "$rootfs" ] || {
 175                 if [ ! -f "$rootfs" -a -s "$rootfs.gz" ]; then
 176                         gunzip "$rootfs.gz"
 177                 fi
 178                 o_qemu_extra+=( \
 179                         "-drive" "file=$rootfs,format=raw,if=virtio" \
 180                         "-append" "root=/dev/vda rootwait" \
 181                 )
 182         }
 183
 184         "$qemu_exe" -machine virt -cpu "$cpu" -nographic \
 185                 -netdev bridge,id=lan,br="$BR_LAN,helper=$HELPER" -device virtio-net-pci,id=devlan,netdev=lan,mac="$MAC_LAN" \
 186                 -netdev bridge,id=wan,br="$BR_WAN,helper=$HELPER" -device virtio-net-pci,id=devwan,netdev=wan,mac="$MAC_WAN" \
 187                 -kernel "$kernel" \
 188                 "${o_qemu_extra[@]}"
 189 }
 190
 191 start_qemu_malta() {
 192         local is64
 193         local isel
 194         local qemu_exe
 195         local kernel="$o_kernel"
 196
 197         # o_subtarget can be le, be, le64, be64, le-glibc, le64-glibc, etc..
 198         is64="$(echo $o_subtarget | grep -o 64)"
 199         [ "$(echo "$o_subtarget" | grep -o '^..')" = "le" ] && isel="el"
 200         qemu_exe="qemu-system-mips$is64$isel"
 201
 202         [ -n "$kernel" ] || kernel="$o_bindir/openwrt-malta-${o_subtarget%-*}-vmlinux-initramfs.elf"
 203
 204         # NOTE: order of wan, lan -device arguments matters as it will affect which
 205         # one will be actually used as the wan, lan network interface inside the
 206         # guest machine
 207         "$qemu_exe" -machine malta -nographic \
 208                 -netdev bridge,id=wan,br="$BR_WAN,helper=$HELPER" -device pcnet,netdev=wan,mac="$MAC_WAN" \
 209                 -netdev bridge,id=lan,br="$BR_LAN,helper=$HELPER" -device pcnet,netdev=lan,mac="$MAC_LAN" \
 210                 -kernel "$kernel" \
 211                 "${o_qemu_extra[@]}"
 212 }
 213
 214 start_qemu_x86() {
 215         local rootfs="$o_rootfs"
 216         local qemu_exe
 217
 218         [ -n "$rootfs" ] || {
 219                 rootfs="$o_bindir/openwrt-$o_target-${o_subtarget%-*}-combined-ext4.img"
 220                 if [ ! -f "$rootfs" -a -s "$rootfs.gz" ]; then
 221                         gunzip "$rootfs.gz"
 222                 fi
 223         }
 224         #
 225         # generic: 32-bit, pentium4 (CONFIG_MPENTIUM4), kvm guest, virtio
 226         # legacy: 32-bit, i486 (CONFIG_M486)
 227         # 64: 64-bit, kvm guest, virtio
 228         #
 229         case "${o_subtarget%-*}" in
 230                 legacy)                 qemu_exe="qemu-system-i386"             ;;
 231                 generic|64)             qemu_exe="qemu-system-x86_64"   ;;
 232                 *)
 233                         __errmsg "target $o_target: unknown subtarget $o_subtarget"
 234                         return 1
 235                         ;;
 236         esac
 237
 238         case "${o_subtarget%-*}" in
 239                 legacy)
 240                         # use IDE (PATA) disk instead of AHCI (SATA).  Refer to link
 241                         # [1] for related discussions
 242                         #
 243                         # To use AHCI interface
 244                         #
 245                         #       -device ich9-ahci,id=ahci \
 246                         #       -device ide-drive,drive=drv0,bus=ahci.0 \
 247                         #       -drive "file=$rootfs,format=raw,id=drv0,if=none" \
 248                         #
 249                         # [1] https://dev.openwrt.org/ticket/17947
 250                         "$qemu_exe" -nographic \
 251                                 -netdev bridge,id=lan,br="$BR_LAN,helper=$HELPER" -device e1000,id=devlan,netdev=lan,mac="$MAC_LAN" \
 252                                 -netdev bridge,id=wan,br="$BR_WAN,helper=$HELPER" -device e1000,id=devwan,netdev=wan,mac="$MAC_WAN" \
 253                                 -device ide-drive,drive=drv0 \
 254                                 -drive "file=$rootfs,format=raw,id=drv0,if=none" \
 255                                 "${o_qemu_extra[@]}"
 256                         ;;
 257                 generic|64)
 258                         "$qemu_exe" -nographic \
 259                                 -netdev bridge,id=lan,br="$BR_LAN,helper=$HELPER" -device virtio-net-pci,id=devlan,netdev=lan,mac="$MAC_LAN" \
 260                                 -netdev bridge,id=wan,br="$BR_WAN,helper=$HELPER" -device virtio-net-pci,id=devwan,netdev=wan,mac="$MAC_WAN" \
 261                                 -drive "file=$rootfs,format=raw,if=virtio" \
 262                                 "${o_qemu_extra[@]}"
 263                         ;;
 264         esac
 265 }
 266
 267 start_qemu() {
 268         case "$o_target" in
 269                 armvirt)        start_qemu_armvirt      ;;
 270                 malta)          start_qemu_malta        ;;
 271                 x86)            start_qemu_x86          ;;
 272                 *)
 273                         __errmsg "target $o_target is not supported yet"
 274                         return 1
 275                         ;;
 276         esac
 277 }
 278
 279 check_setup \
 280         && parse_args "$@" \
 281         && start_qemu