target/linux/apm821xx/patches-4.14/802-usb-xhci-force-msi-renesas-xhci.patch

   1 From a0dc613140bab907a3d5787a7ae7b0638bf674d0 Mon Sep 17 00:00:00 2001
   2 From: Christian Lamparter <chunkeey@gmail.com>
   3 Date: Thu, 23 Jun 2016 20:28:20 +0200
   4 Subject: [PATCH] usb: xhci: force MSI for uPD720201 and
   5  uPD720202
   6
   7 The APM82181 does not support MSI-X. When probed, it will
   8 produce a noisy warning.
   9
  10 ---
  11  drivers/usb/host/pci-quirks.c | 362 ++++++++++++++++++++++++++++++++++++++++++
  12  1 file changed, 362 insertions(+)
  13
  14 --- a/drivers/usb/host/xhci-pci.c
  15 +++ b/drivers/usb/host/xhci-pci.c
  16 @@ -225,7 +225,7 @@ static void xhci_pci_quirks(struct devic
  17                 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
  18         if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
  19                         pdev->device == 0x0015)
  20 -               xhci->quirks |= XHCI_RESET_ON_RESUME;
  21 +               xhci->quirks |= XHCI_RESET_ON_RESUME | XHCI_FORCE_MSI;
  22         if (pdev->vendor == PCI_VENDOR_ID_VIA)
  23                 xhci->quirks |= XHCI_RESET_ON_RESUME;
  24
  25 --- a/drivers/usb/host/xhci.c
  26 +++ b/drivers/usb/host/xhci.c
  27 @@ -370,10 +370,14 @@ static int xhci_try_enable_msi(struct us
  28                 free_irq(hcd->irq, hcd);
  29         hcd->irq = 0;
  30
  31 -       ret = xhci_setup_msix(xhci);
  32 -       if (ret)
  33 -               /* fall back to msi*/
  34 +       if (xhci->quirks & XHCI_FORCE_MSI) {
  35                 ret = xhci_setup_msi(xhci);
  36 +       } else {
  37 +               ret = xhci_setup_msix(xhci);
  38 +               if (ret)
  39 +                       /* fall back to msi*/
  40 +                       ret = xhci_setup_msi(xhci);
  41 +       }
  42
  43         if (!ret) {
  44                 hcd->msi_enabled = 1;
  45 --- a/drivers/usb/host/xhci.h
  46 +++ b/drivers/usb/host/xhci.h
  47 @@ -1858,6 +1858,7 @@ struct xhci_hcd {
  48         /* support xHCI 0.96 spec USB2 software LPM */
  49         unsigned                sw_lpm_support:1;
  50         /* support xHCI 1.0 spec USB2 hardware LPM */
  51 +#define XHCI_FORCE_MSI         (1 << 24)
  52         unsigned                hw_lpm_support:1;
  53         /* Broken Suspend flag for SNPS Suspend resume issue */
  54         unsigned                broken_suspend:1;