ar71xx: PowerCloud CR5000 openwrt configuration
[openwrt/openwrt.git] / target / linux / ar71xx / base-files / lib / upgrade / platform.sh
1 #
2 # Copyright (C) 2011 OpenWrt.org
3 #
4
5 . /lib/functions/system.sh
6 . /lib/ar71xx.sh
7
8 PART_NAME=firmware
9 RAMFS_COPY_DATA=/lib/ar71xx.sh
10
11 CI_BLKSZ=65536
12 CI_LDADR=0x80060000
13
14 platform_find_partitions() {
15 local first dev size erasesize name
16 while read dev size erasesize name; do
17 name=${name#'"'}; name=${name%'"'}
18 case "$name" in
19 vmlinux.bin.l7|vmlinux|kernel|linux|linux.bin|rootfs|filesystem)
20 if [ -z "$first" ]; then
21 first="$name"
22 else
23 echo "$erasesize:$first:$name"
24 break
25 fi
26 ;;
27 esac
28 done < /proc/mtd
29 }
30
31 platform_find_kernelpart() {
32 local part
33 for part in "${1%:*}" "${1#*:}"; do
34 case "$part" in
35 vmlinux.bin.l7|vmlinux|kernel|linux|linux.bin)
36 echo "$part"
37 break
38 ;;
39 esac
40 done
41 }
42
43 platform_do_upgrade_combined() {
44 local partitions=$(platform_find_partitions)
45 local kernelpart=$(platform_find_kernelpart "${partitions#*:}")
46 local erase_size=$((0x${partitions%%:*})); partitions="${partitions#*:}"
47 local kern_length=0x$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null)
48 local kern_blocks=$(($kern_length / $CI_BLKSZ))
49 local root_blocks=$((0x$(dd if="$1" bs=2 skip=5 count=4 2>/dev/null) / $CI_BLKSZ))
50
51 if [ -n "$partitions" ] && [ -n "$kernelpart" ] && \
52 [ ${kern_blocks:-0} -gt 0 ] && \
53 [ ${root_blocks:-0} -gt 0 ] && \
54 [ ${erase_size:-0} -gt 0 ];
55 then
56 local append=""
57 [ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
58
59 ( dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null; \
60 dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null ) | \
61 mtd -r $append -F$kernelpart:$kern_length:$CI_LDADR,rootfs write - $partitions
62 fi
63 }
64
65 tplink_get_image_hwid() {
66 get_image "$@" | dd bs=4 count=1 skip=16 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
67 }
68
69 tplink_get_image_boot_size() {
70 get_image "$@" | dd bs=4 count=1 skip=37 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
71 }
72
73 tplink_pharos_check_image() {
74 local magic_long="$(get_magic_long "$1")"
75 [ "$magic_long" != "7f454c46" ] && {
76 echo "Invalid image magic '$magic_long'"
77 return 1
78 }
79
80 local model_string="$(tplink_pharos_get_model_string)"
81 local line
82
83 # Here $1 is given to dd directly instead of get_image as otherwise the skip
84 # will take almost a second (as dd can't seek then)
85 #
86 # This will fail if the image isn't local, but that's fine: as the
87 # read loop won't be executed at all, it will return true, so the image
88 # is accepted (loading the first 1.5M of a remote image for this check seems
89 # a bit extreme)
90 dd if="$1" bs=1 skip=1511432 count=1024 2>/dev/null | while read line; do
91 [ "$line" == "$model_string" ] && break
92 done || {
93 echo "Unsupported image (model not in support-list)"
94 return 1
95 }
96
97 return 0
98 }
99
100 seama_get_type_magic() {
101 get_image "$@" | dd bs=1 count=4 skip=53 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
102 }
103
104 cybertan_get_image_magic() {
105 get_image "$@" | dd bs=8 count=1 skip=0 2>/dev/null | hexdump -v -n 8 -e '1/1 "%02x"'
106 }
107
108 cybertan_check_image() {
109 local magic="$(cybertan_get_image_magic "$1")"
110 local fw_magic="$(cybertan_get_hw_magic)"
111
112 [ "$fw_magic" != "$magic" ] && {
113 echo "Invalid image, ID mismatch, got:$magic, but need:$fw_magic"
114 return 1
115 }
116
117 return 0
118 }
119
120 platform_do_upgrade_compex() {
121 local fw_file=$1
122 local fw_part=$PART_NAME
123 local fw_mtd=$(find_mtd_part $fw_part)
124 local fw_length=0x$(dd if="$fw_file" bs=2 skip=1 count=4 2>/dev/null)
125 local fw_blocks=$(($fw_length / 65536))
126
127 if [ -n "$fw_mtd" ] && [ ${fw_blocks:-0} -gt 0 ]; then
128 local append=""
129 [ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
130
131 sync
132 dd if="$fw_file" bs=64k skip=1 count=$fw_blocks 2>/dev/null | \
133 mtd $append write - "$fw_part"
134 fi
135 }
136
137 alfa_check_image() {
138 local magic_long="$(get_magic_long "$1")"
139 local fw_part_size=$(mtd_get_part_size firmware)
140
141 case "$magic_long" in
142 "27051956")
143 [ "$fw_part_size" != "16318464" ] && {
144 echo "Invalid image magic \"$magic_long\" for $fw_part_size bytes"
145 return 1
146 }
147 ;;
148
149 "68737173")
150 [ "$fw_part_size" != "7929856" ] && {
151 echo "Invalid image magic \"$magic_long\" for $fw_part_size bytes"
152 return 1
153 }
154 ;;
155 esac
156
157 return 0
158 }
159
160 platform_check_image() {
161 local board=$(ar71xx_board_name)
162 local magic="$(get_magic_word "$1")"
163 local magic_long="$(get_magic_long "$1")"
164
165 [ "$#" -gt 1 ] && return 1
166
167 case "$board" in
168 all0315n | \
169 all0258n | \
170 cap324 | \
171 cap4200ag | \
172 cr3000 |\
173 cr5000)
174 platform_check_image_allnet "$1" && return 0
175 return 1
176 ;;
177 alfa-ap96 | \
178 alfa-nx | \
179 arduino-yun | \
180 ap113 | \
181 ap121 | \
182 ap121-mini | \
183 ap136-010 | \
184 ap136-020 | \
185 ap135-020 | \
186 ap147-010 | \
187 ap96 | \
188 bxu2000n-2-a1 | \
189 db120 | \
190 dr344 | \
191 f9k1115v2 |\
192 hornet-ub | \
193 mr12 | \
194 mr16 | \
195 wpj558 | \
196 zcn-1523h-2 | \
197 zcn-1523h-5)
198 [ "$magic_long" != "68737173" -a "$magic_long" != "19852003" ] && {
199 echo "Invalid image type."
200 return 1
201 }
202 return 0
203 ;;
204 ap81 | \
205 ap83 | \
206 ap132 | \
207 cf-e316n-v2 | \
208 dgl-5500-a1 |\
209 dhp-1565-a1 |\
210 dir-505-a1 | \
211 dir-600-a1 | \
212 dir-615-c1 | \
213 dir-615-e1 | \
214 dir-615-e4 | \
215 dir-615-i1 | \
216 dir-825-c1 | \
217 dir-835-a1 | \
218 dlan-hotspot | \
219 dlan-pro-500-wp | \
220 dlan-pro-1200-ac | \
221 dragino2 | \
222 epg5000 | \
223 esr1750 | \
224 esr900 | \
225 ew-dorin | \
226 ew-dorin-router | \
227 gl-ar150 | \
228 gl-ar300 | \
229 gl-domino | \
230 hiwifi-hc6361 | \
231 hornet-ub-x2 | \
232 mzk-w04nu | \
233 mzk-w300nh | \
234 tew-632brp | \
235 tew-712br | \
236 tew-732br | \
237 tew-823dru | \
238 wrt400n | \
239 airgateway | \
240 airgatewaypro | \
241 airrouter | \
242 bullet-m | \
243 loco-m-xw | \
244 nanostation-m | \
245 rocket-m | \
246 rocket-m-xw | \
247 rocket-m-ti | \
248 nanostation-m-xw | \
249 rw2458n | \
250 wpj531 | \
251 wndap360 | \
252 wpj344 | \
253 wzr-hp-g300nh2 | \
254 wzr-hp-g300nh | \
255 wzr-hp-g450h | \
256 wzr-hp-ag300h | \
257 wzr-450hp2 | \
258 whr-g301n | \
259 whr-hp-g300n | \
260 whr-hp-gn | \
261 wlae-ag300n | \
262 nbg460n_550n_550nh | \
263 unifi | \
264 unifi-outdoor | \
265 carambola2 | \
266 weio )
267 [ "$magic" != "2705" ] && {
268 echo "Invalid image type."
269 return 1
270 }
271 return 0
272 ;;
273
274 cpe510)
275 tplink_pharos_check_image "$1" && return 0
276 return 1
277 ;;
278
279 bsb | \
280 dir-825-b1 | \
281 tew-673gru)
282 dir825b_check_image "$1" && return 0
283 ;;
284
285 mynet-rext|\
286 wrt160nl)
287 cybertan_check_image "$1" && return 0
288 return 1
289 ;;
290
291 qihoo-c301 | \
292 mynet-n600 | \
293 mynet-n750)
294 [ "$magic_long" != "5ea3a417" ] && {
295 echo "Invalid image, bad magic: $magic_long"
296 return 1
297 }
298
299 local typemagic=$(seama_get_type_magic "$1")
300 [ "$typemagic" != "6669726d" ] && {
301 echo "Invalid image, bad type: $typemagic"
302 return 1
303 }
304
305 return 0;
306 ;;
307 mr1750 | \
308 mr600 | \
309 mr600v2 | \
310 mr900 | \
311 mr900v2 | \
312 om2p | \
313 om2pv2 | \
314 om2p-hs | \
315 om2p-hsv2 | \
316 om2p-lc | \
317 om5p | \
318 om5p-an)
319 platform_check_image_openmesh "$magic_long" "$1" && return 0
320 return 1
321 ;;
322
323 antminer-s1 | \
324 antminer-s3 | \
325 archer-c5 | \
326 archer-c7 | \
327 el-m150 | \
328 el-mini | \
329 gl-inet | \
330 mc-mac1200r | \
331 minibox-v1 |\
332 onion-omega | \
333 oolite | \
334 smart-300 | \
335 tl-mr10u | \
336 tl-mr11u | \
337 tl-mr12u | \
338 tl-mr13u | \
339 tl-mr3020 | \
340 tl-mr3040 | \
341 tl-mr3040-v2 | \
342 tl-mr3220 | \
343 tl-mr3220-v2 | \
344 tl-mr3420 | \
345 tl-mr3420-v2 | \
346 tl-wa701nd-v2 | \
347 tl-wa7210n-v2 | \
348 tl-wa7510n | \
349 tl-wa750re | \
350 tl-wa850re | \
351 tl-wa860re | \
352 tl-wa801nd-v2 | \
353 tl-wa901nd | \
354 tl-wa901nd-v2 | \
355 tl-wa901nd-v3 | \
356 tl-wdr3320-v2 | \
357 tl-wdr3500 | \
358 tl-wdr4300 | \
359 tl-wdr4900-v2 | \
360 tl-wdr6500-v2 | \
361 tl-wr703n | \
362 tl-wr710n | \
363 tl-wr720n-v3 | \
364 tl-wr741nd | \
365 tl-wr741nd-v4 | \
366 tl-wr841n-v1 | \
367 tl-wa830re-v2 | \
368 tl-wr841n-v7 | \
369 tl-wr841n-v8 | \
370 tl-wr841n-v9 | \
371 tl-wr842n-v2 | \
372 tl-wr941nd | \
373 tl-wr941nd-v5 | \
374 tl-wr941nd-v6 | \
375 tl-wr1041n-v2 | \
376 tl-wr1043nd | \
377 tl-wr1043nd-v2 | \
378 tl-wr2543n)
379 local magic_ver="0100"
380
381 case "$board" in
382 tl-wdr6500-v2)
383 magic_ver="0200"
384 ;;
385 esac
386
387 [ "$magic" != "$magic_ver" ] && {
388 echo "Invalid image type."
389 return 1
390 }
391
392 local hwid
393 local imageid
394
395 hwid=$(tplink_get_hwid)
396 imageid=$(tplink_get_image_hwid "$1")
397
398 [ "$hwid" != "$imageid" ] && {
399 echo "Invalid image, hardware ID mismatch, hw:$hwid image:$imageid."
400 return 1
401 }
402
403 local boot_size
404
405 boot_size=$(tplink_get_image_boot_size "$1")
406 [ "$boot_size" != "00000000" ] && {
407 echo "Invalid image, it contains a bootloader."
408 return 1
409 }
410
411 return 0
412 ;;
413
414 tube2h)
415 alfa_check_image "$1" && return 0
416 return 1
417 ;;
418
419 nbg6616 | \
420 unifi-outdoor-plus | \
421 uap-pro)
422 [ "$magic_long" != "19852003" ] && {
423 echo "Invalid image type."
424 return 1
425 }
426 return 0
427 ;;
428 wndr3700 | \
429 wnr2000-v3 | \
430 wnr612-v2 | \
431 wnr1000-v2)
432 local hw_magic
433
434 hw_magic="$(ar71xx_get_mtd_part_magic firmware)"
435 [ "$magic_long" != "$hw_magic" ] && {
436 echo "Invalid image, hardware ID mismatch, hw:$hw_magic image:$magic_long."
437 return 1
438 }
439 return 0
440 ;;
441 mr18)
442 merakinand_do_platform_check $board $1
443 return $?;
444 ;;
445 nbg6716 | \
446 r6100 | \
447 wndr3700v4 | \
448 wndr4300 )
449 nand_do_platform_check $board $1
450 return $?;
451 ;;
452 routerstation | \
453 routerstation-pro | \
454 ls-sr71 | \
455 pb42 | \
456 pb44 | \
457 all0305 | \
458 eap300v2 | \
459 eap7660d | \
460 ja76pf | \
461 ja76pf2 | \
462 jwap003 | \
463 wp543 | \
464 wpe72)
465 [ "$magic" != "4349" ] && {
466 echo "Invalid image. Use *-sysupgrade.bin files on this board"
467 return 1
468 }
469
470 local md5_img=$(dd if="$1" bs=2 skip=9 count=16 2>/dev/null)
471 local md5_chk=$(dd if="$1" bs=$CI_BLKSZ skip=1 2>/dev/null | md5sum -); md5_chk="${md5_chk%% *}"
472
473 if [ -n "$md5_img" -a -n "$md5_chk" ] && [ "$md5_img" = "$md5_chk" ]; then
474 return 0
475 else
476 echo "Invalid image. Contents do not match checksum (image:$md5_img calculated:$md5_chk)"
477 return 1
478 fi
479 return 0
480 ;;
481 wnr2000-v4)
482 [ "$magic_long" != "32303034" ] && {
483 echo "Invalid image type."
484 return 1
485 }
486 return 0
487 ;;
488
489 esac
490
491 echo "Sysupgrade is not yet supported on $board."
492 return 1
493 }
494
495 platform_pre_upgrade() {
496 local board=$(ar71xx_board_name)
497
498 case "$board" in
499 nbg6716 | \
500 r6100 | \
501 wndr3700v4 | \
502 wndr4300 )
503 nand_do_upgrade "$1"
504 ;;
505 mr18)
506 merakinand_do_upgrade "$1"
507 ;;
508 esac
509 }
510
511 platform_do_upgrade() {
512 local board=$(ar71xx_board_name)
513
514 case "$board" in
515 routerstation | \
516 routerstation-pro | \
517 ls-sr71 | \
518 all0305 | \
519 eap7660d | \
520 pb42 | \
521 pb44 | \
522 ja76pf | \
523 ja76pf2 | \
524 jwap003)
525 platform_do_upgrade_combined "$ARGV"
526 ;;
527 wp543|\
528 wpe72)
529 platform_do_upgrade_compex "$ARGV"
530 ;;
531 all0258n )
532 platform_do_upgrade_allnet "0x9f050000" "$ARGV"
533 ;;
534 all0315n )
535 platform_do_upgrade_allnet "0x9f080000" "$ARGV"
536 ;;
537 eap300v2 |\
538 cap4200ag)
539 platform_do_upgrade_allnet "0xbf0a0000" "$ARGV"
540 ;;
541 dir-825-b1 |\
542 tew-673gru)
543 platform_do_upgrade_dir825b "$ARGV"
544 ;;
545 mr1750 | \
546 mr600 | \
547 mr600v2 | \
548 mr900 | \
549 mr900v2 | \
550 om2p | \
551 om2pv2 | \
552 om2p-hs | \
553 om2p-hsv2 | \
554 om2p-lc | \
555 om5p | \
556 om5p-an)
557 platform_do_upgrade_openmesh "$ARGV"
558 ;;
559 unifi-outdoor-plus | \
560 uap-pro)
561 MTD_CONFIG_ARGS="-s 0x180000"
562 default_do_upgrade "$ARGV"
563 ;;
564 *)
565 default_do_upgrade "$ARGV"
566 ;;
567 esac
568 }
569
570 disable_watchdog() {
571 killall watchdog
572 ( ps | grep -v 'grep' | grep '/dev/watchdog' ) && {
573 echo 'Could not disable watchdog'
574 return 1
575 }
576 }
577
578 append sysupgrade_pre_upgrade disable_watchdog