linux: ar71xx: add support for Mikrotik Routerboard RB493G
[openwrt/openwrt.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-ap81.c
1 /*
2 * Atheros AP81 board support
3 *
4 * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
5 * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License version 2 as published
9 * by the Free Software Foundation.
10 */
11
12 #include <linux/mtd/mtd.h>
13 #include <linux/mtd/partitions.h>
14
15 #include <asm/mach-ar71xx/ar71xx.h>
16
17 #include "machtype.h"
18 #include "devices.h"
19 #include "dev-m25p80.h"
20 #include "dev-ar9xxx-wmac.h"
21 #include "dev-gpio-buttons.h"
22 #include "dev-leds-gpio.h"
23 #include "dev-usb.h"
24
25 #define AP81_GPIO_LED_STATUS 1
26 #define AP81_GPIO_LED_AOSS 3
27 #define AP81_GPIO_LED_WLAN 6
28 #define AP81_GPIO_LED_POWER 14
29
30 #define AP81_GPIO_BTN_SW4 12
31 #define AP81_GPIO_BTN_SW1 21
32
33 #define AP81_KEYS_POLL_INTERVAL 20 /* msecs */
34 #define AP81_KEYS_DEBOUNCE_INTERVAL (3 * AP81_KEYS_POLL_INTERVAL)
35
36 #ifdef CONFIG_MTD_PARTITIONS
37 static struct mtd_partition ap81_partitions[] = {
38 {
39 .name = "u-boot",
40 .offset = 0,
41 .size = 0x040000,
42 .mask_flags = MTD_WRITEABLE,
43 }, {
44 .name = "u-boot-env",
45 .offset = 0x040000,
46 .size = 0x010000,
47 }, {
48 .name = "rootfs",
49 .offset = 0x050000,
50 .size = 0x500000,
51 }, {
52 .name = "uImage",
53 .offset = 0x550000,
54 .size = 0x100000,
55 }, {
56 .name = "ART",
57 .offset = 0x650000,
58 .size = 0x1b0000,
59 .mask_flags = MTD_WRITEABLE,
60 }
61 };
62 #endif /* CONFIG_MTD_PARTITIONS */
63
64 static struct flash_platform_data ap81_flash_data = {
65 #ifdef CONFIG_MTD_PARTITIONS
66 .parts = ap81_partitions,
67 .nr_parts = ARRAY_SIZE(ap81_partitions),
68 #endif
69 };
70
71 static struct gpio_led ap81_leds_gpio[] __initdata = {
72 {
73 .name = "ap81:green:status",
74 .gpio = AP81_GPIO_LED_STATUS,
75 .active_low = 1,
76 }, {
77 .name = "ap81:amber:aoss",
78 .gpio = AP81_GPIO_LED_AOSS,
79 .active_low = 1,
80 }, {
81 .name = "ap81:green:wlan",
82 .gpio = AP81_GPIO_LED_WLAN,
83 .active_low = 1,
84 }, {
85 .name = "ap81:green:power",
86 .gpio = AP81_GPIO_LED_POWER,
87 .active_low = 1,
88 }
89 };
90
91 static struct gpio_keys_button ap81_gpio_keys[] __initdata = {
92 {
93 .desc = "sw1",
94 .type = EV_KEY,
95 .code = BTN_0,
96 .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL,
97 .gpio = AP81_GPIO_BTN_SW1,
98 .active_low = 1,
99 }, {
100 .desc = "sw4",
101 .type = EV_KEY,
102 .code = BTN_1,
103 .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL,
104 .gpio = AP81_GPIO_BTN_SW4,
105 .active_low = 1,
106 }
107 };
108
109 static void __init ap81_setup(void)
110 {
111 u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
112
113 ar71xx_add_device_mdio(0x0);
114
115 ar71xx_init_mac(ar71xx_eth0_data.mac_addr, eeprom, 0);
116 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
117 ar71xx_eth0_data.speed = SPEED_100;
118 ar71xx_eth0_data.duplex = DUPLEX_FULL;
119 ar71xx_eth0_data.has_ar8216 = 1;
120
121 ar71xx_init_mac(ar71xx_eth1_data.mac_addr, eeprom, 1);
122 ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
123 ar71xx_eth1_data.phy_mask = 0x10;
124
125 ar71xx_add_device_eth(0);
126 ar71xx_add_device_eth(1);
127
128 ar71xx_add_device_usb();
129
130 ar71xx_add_device_m25p80(&ap81_flash_data);
131
132 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio),
133 ap81_leds_gpio);
134
135 ar71xx_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
136 ARRAY_SIZE(ap81_gpio_keys),
137 ap81_gpio_keys);
138
139 ar9xxx_add_device_wmac(eeprom, NULL);
140 }
141
142 MIPS_MACHINE(AR71XX_MACH_AP81, "AP81", "Atheros AP81", ap81_setup);