target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wa901nd.c

   1 /*
   2  *  TP-LINK TL-WA901ND board support
   3  *
   4  *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
   5  *  Copyright (C) 2010 Pieter Hollants <pieter@hollants.com>
   6  *
   7  *  This program is free software; you can redistribute it and/or modify it
   8  *  under the terms of the GNU General Public License version 2 as published
   9  *  by the Free Software Foundation.
  10  */
  11
  12 #include <linux/mtd/mtd.h>
  13 #include <linux/mtd/partitions.h>
  14
  15 #include <asm/mach-ar71xx/ar71xx.h>
  16
  17 #include "machtype.h"
  18 #include "devices.h"
  19 #include "dev-m25p80.h"
  20 #include "dev-ap91-pci.h"
  21 #include "dev-gpio-buttons.h"
  22 #include "dev-leds-gpio.h"
  23
  24 #define TL_WA901ND_GPIO_LED_QSS         0
  25 #define TL_WA901ND_GPIO_LED_SYSTEM      1
  26
  27 #define TL_WA901ND_GPIO_BTN_RESET       11
  28 #define TL_WA901ND_GPIO_BTN_QSS         12
  29
  30 #define TL_WA901ND_BUTTONS_POLL_INTERVAL        20
  31
  32 #ifdef CONFIG_MTD_PARTITIONS
  33 static struct mtd_partition tl_wa901nd_partitions[] = {
  34         {
  35                 .name           = "u-boot",
  36                 .offset         = 0,
  37                 .size           = 0x020000,
  38                 .mask_flags     = MTD_WRITEABLE,
  39         }, {
  40                 .name           = "kernel",
  41                 .offset         = 0x020000,
  42                 .size           = 0x140000,
  43         }, {
  44                 .name           = "rootfs",
  45                 .offset         = 0x160000,
  46                 .size           = 0x290000,
  47         }, {
  48                 .name           = "art",
  49                 .offset         = 0x3f0000,
  50                 .size           = 0x010000,
  51                 .mask_flags     = MTD_WRITEABLE,
  52         }, {
  53                 .name           = "firmware",
  54                 .offset         = 0x020000,
  55                 .size           = 0x3d0000,
  56         }
  57 };
  58 #endif /* CONFIG_MTD_PARTITIONS */
  59
  60 static struct flash_platform_data tl_wa901nd_flash_data = {
  61 #ifdef CONFIG_MTD_PARTITIONS
  62         .parts          = tl_wa901nd_partitions,
  63         .nr_parts       = ARRAY_SIZE(tl_wa901nd_partitions),
  64 #endif
  65 };
  66
  67 static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = {
  68         {
  69                 .name           = "tl-wa901nd:green:system",
  70                 .gpio           = TL_WA901ND_GPIO_LED_SYSTEM,
  71                 .active_low     = 1,
  72         }, {
  73                 .name           = "tl-wa901nd:green:qss",
  74                 .gpio           = TL_WA901ND_GPIO_LED_QSS,
  75                 .active_low     = 1,
  76         }
  77 };
  78
  79 static struct gpio_button tl_wa901nd_gpio_buttons[] __initdata = {
  80         {
  81                 .desc           = "reset",
  82                 .type           = EV_KEY,
  83                 .code           = BTN_0,
  84                 .threshold      = 3,
  85                 .gpio           = TL_WA901ND_GPIO_BTN_RESET,
  86                 .active_low     = 1,
  87         }, {
  88                 .desc           = "qss",
  89                 .type           = EV_KEY,
  90                 .code           = BTN_1,
  91                 .threshold      = 3,
  92                 .gpio           = TL_WA901ND_GPIO_BTN_QSS,
  93                 .active_low     = 1,
  94         }
  95 };
  96
  97 static void __init tl_wa901nd_setup(void)
  98 {
  99         u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
 100         u8 *ee  = (u8 *) KSEG1ADDR(0x1fff1000);
 101
 102         /*
 103          * ar71xx_eth0 would be the WAN port, but is not connected on
 104          * the TL-WA901ND. ar71xx_eth1 connects to the internal switch chip,
 105          * however we have a single LAN port only.
 106          */
 107         ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 0);
 108         ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
 109         ar71xx_eth1_data.speed       = SPEED_1000;
 110         ar71xx_eth1_data.duplex      = DUPLEX_FULL;
 111         ar71xx_eth1_data.has_ar7240_switch = 1;
 112
 113         ar71xx_add_device_mdio(0x0);
 114         ar71xx_add_device_eth(1);
 115
 116         ar71xx_add_device_m25p80(&tl_wa901nd_flash_data);
 117
 118         ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio),
 119                                         tl_wa901nd_leds_gpio);
 120
 121         ar71xx_add_device_gpio_buttons(-1, TL_WA901ND_BUTTONS_POLL_INTERVAL,
 122                                         ARRAY_SIZE(tl_wa901nd_gpio_buttons),
 123                                         tl_wa901nd_gpio_buttons);
 124
 125         ap91_pci_init(ee, mac);
 126 }
 127
 128 MIPS_MACHINE(AR71XX_MACH_TL_WA901ND, "TL-WA901ND", "TP-LINK TL-WA901ND",
 129              tl_wa901nd_setup);