ar71xx: add preliminary support for the Netgear WNDR3700
[openwrt/openwrt.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-wndr3700.c
1 /*
2 * Netgear WNDR3700 board support
3 *
4 * Copyright (C) 2009 Marco Porsch
5 * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License version 2 as published
9 * by the Free Software Foundation.
10 */
11
12 #include <linux/platform_device.h>
13 #include <linux/mtd/mtd.h>
14 #include <linux/mtd/partitions.h>
15 #include <linux/spi/spi.h>
16 #include <linux/spi/flash.h>
17
18 #include <asm/mips_machine.h>
19 #include <asm/mach-ar71xx/ar71xx.h>
20 #include <asm/mach-ar71xx/pci.h>
21
22 #include "devices.h"
23
24 #ifdef CONFIG_MTD_PARTITIONS
25 static struct mtd_partition wndr3700_partitions[] = {
26 {
27 .name = "uboot",
28 .offset = 0,
29 .size = 0x050000,
30 .mask_flags = MTD_WRITEABLE,
31 } , {
32 .name = "env",
33 .offset = 0x050000,
34 .size = 0x020000,
35 .mask_flags = MTD_WRITEABLE,
36 } , {
37 .name = "rootfs",
38 .offset = 0x070000,
39 .size = 0x720000,
40 } , {
41 .name = "config",
42 .offset = 0x790000,
43 .size = 0x010000,
44 .mask_flags = MTD_WRITEABLE,
45 } , {
46 .name = "config_bak",
47 .offset = 0x7a0000,
48 .size = 0x010000,
49 .mask_flags = MTD_WRITEABLE,
50 } , {
51 .name = "pot",
52 .offset = 0x7b0000,
53 .size = 0x010000,
54 .mask_flags = MTD_WRITEABLE,
55 } , {
56 .name = "traffic_meter",
57 .offset = 0x7c0000,
58 .size = 0x010000,
59 .mask_flags = MTD_WRITEABLE,
60 } , {
61 .name = "language",
62 .offset = 0x7d0000,
63 .size = 0x020000,
64 .mask_flags = MTD_WRITEABLE,
65 } , {
66 .name = "caldata",
67 .offset = 0x7f0000,
68 .size = 0x010000,
69 .mask_flags = MTD_WRITEABLE,
70 }
71 };
72 #endif /* CONFIG_MTD_PARTITIONS */
73
74 static struct flash_platform_data wndr3700_flash_data = {
75 #ifdef CONFIG_MTD_PARTITIONS
76 .parts = wndr3700_partitions,
77 .nr_parts = ARRAY_SIZE(wndr3700_partitions),
78 #endif
79 };
80
81 static struct ar71xx_pci_irq wndr3700_pci_irqs[] __initdata = {
82 {
83 .slot = 0,
84 .pin = 1,
85 .irq = AR71XX_PCI_IRQ_DEV0,
86 }, {
87 .slot = 1,
88 .pin = 1,
89 .irq = AR71XX_PCI_IRQ_DEV1,
90 }
91 };
92
93 static struct spi_board_info wndr3700_spi_info[] = {
94 {
95 .bus_num = 0,
96 .chip_select = 0,
97 .max_speed_hz = 25000000,
98 .modalias = "m25p80",
99 .platform_data = &wndr3700_flash_data,
100 }
101 };
102
103 static void __init wndr3700_setup(void)
104 {
105 u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
106
107 ar71xx_set_mac_base(mac);
108 ar71xx_add_device_mdio(0x0);
109
110 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
111 ar71xx_eth0_data.phy_mask = 0xf;
112 ar71xx_eth0_data.speed = SPEED_1000;
113 ar71xx_eth0_data.duplex = DUPLEX_FULL;
114
115 ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
116 ar71xx_eth1_data.phy_mask = 0x10;
117
118 ar71xx_add_device_eth(0);
119 ar71xx_add_device_eth(1);
120
121 ar71xx_add_device_usb();
122
123 ar71xx_pci_init(ARRAY_SIZE(wndr3700_pci_irqs), wndr3700_pci_irqs);
124
125 ar71xx_add_device_spi(NULL, wndr3700_spi_info,
126 ARRAY_SIZE(wndr3700_spi_info));
127
128 /* TODO: LEDs, buttons support */
129 }
130
131 MIPS_MACHINE(AR71XX_MACH_WNDR3700, "NETGEAR WNDR3700", wndr3700_setup);