wireguard-tools: add tunlink option for hostroute
[openwrt/openwrt.git] / target / linux / ar71xx / files / arch / mips / ath79 / mach-n5q.c
1 /*
2 * ALFA Network N5Q board support
3 *
4 * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
9 */
10
11 #include <linux/gpio.h>
12 #include <linux/platform_device.h>
13
14 #include <asm/mach-ath79/ath79.h>
15 #include <asm/mach-ath79/ar71xx_regs.h>
16
17 #include "common.h"
18 #include "dev-eth.h"
19 #include "dev-gpio-buttons.h"
20 #include "dev-leds-gpio.h"
21 #include "dev-m25p80.h"
22 #include "dev-wmac.h"
23 #include "machtypes.h"
24
25 #define N5Q_GPIO_LED_LAN 19
26 #define N5Q_GPIO_LED_SIGNAL1 0
27 #define N5Q_GPIO_LED_SIGNAL2 1
28 #define N5Q_GPIO_LED_SIGNAL3 2
29 #define N5Q_GPIO_LED_SIGNAL4 3
30 #define N5Q_GPIO_LED_WAN 18
31 #define N5Q_GPIO_LED_WLAN 12
32
33 #define N5Q_GPIO_WDT_EN 16
34 #define N5Q_GPIO_WDT_IN 17
35
36 #define N5Q_GPIO_BTN_RESET 11
37
38 #define N5Q_MAC0_OFFSET 0
39 #define N5Q_MAC1_OFFSET 6
40 #define N5Q_WMAC_CALDATA_OFFSET 0x1000
41
42 #define N5Q_KEYS_POLL_INTERVAL 20
43 #define N5Q_KEYS_DEBOUNCE_INTERVAL (3 * N5Q_KEYS_POLL_INTERVAL)
44
45 static struct gpio_led n5q_leds_gpio[] __initdata = {
46 {
47 .name = "n5q:green:lan",
48 .gpio = N5Q_GPIO_LED_LAN,
49 .active_low = 1,
50 }, {
51 .name = "n5q:red:signal1",
52 .gpio = N5Q_GPIO_LED_SIGNAL1,
53 .active_low = 1,
54 }, {
55 .name = "n5q:orange:signal2",
56 .gpio = N5Q_GPIO_LED_SIGNAL2,
57 .active_low = 1,
58 }, {
59 .name = "n5q:green:signal3",
60 .gpio = N5Q_GPIO_LED_SIGNAL3,
61 .active_low = 1,
62 }, {
63 .name = "n5q:green:signal4",
64 .gpio = N5Q_GPIO_LED_SIGNAL4,
65 .active_low = 1,
66 }, {
67 .name = "n5q:green:wan",
68 .gpio = N5Q_GPIO_LED_WAN,
69 .active_low = 1,
70 }, {
71 .name = "n5q:green:wlan",
72 .gpio = N5Q_GPIO_LED_WLAN,
73 .active_low = 1,
74 },
75 };
76
77 static struct gpio_keys_button n5q_gpio_keys[] __initdata = {
78 {
79 .desc = "reset",
80 .type = EV_KEY,
81 .code = KEY_RESTART,
82 .debounce_interval = N5Q_KEYS_DEBOUNCE_INTERVAL,
83 .gpio = N5Q_GPIO_BTN_RESET,
84 .active_low = 1,
85 },
86 };
87
88 static void __init n5q_setup(void)
89 {
90 u8 *art = (u8 *) KSEG1ADDR(0x1f070000);
91
92 ath79_register_m25p80(NULL);
93
94 ath79_register_mdio(1, 0x0);
95
96 ath79_switch_data.phy4_mii_en = 1;
97 ath79_switch_data.phy_poll_mask = 0xf7;
98
99 /* LAN */
100 ath79_eth1_data.duplex = DUPLEX_FULL;
101 ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
102 ath79_init_mac(ath79_eth1_data.mac_addr, art + N5Q_MAC1_OFFSET, 0);
103 ath79_register_eth(1);
104
105 /* WAN */
106 ath79_eth0_data.duplex = DUPLEX_FULL;
107 ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
108 ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
109 ath79_eth0_data.phy_mask = BIT(4);
110 ath79_eth0_data.speed = SPEED_100;
111 ath79_init_mac(ath79_eth0_data.mac_addr, art + N5Q_MAC0_OFFSET, 0);
112 ath79_register_eth(0);
113
114 ath79_register_leds_gpio(-1, ARRAY_SIZE(n5q_leds_gpio),
115 n5q_leds_gpio);
116
117 ath79_register_gpio_keys_polled(-1, N5Q_KEYS_POLL_INTERVAL,
118 ARRAY_SIZE(n5q_gpio_keys),
119 n5q_gpio_keys);
120
121 gpio_request_one(N5Q_GPIO_WDT_IN,
122 GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
123 "WDT input");
124
125 gpio_request_one(N5Q_GPIO_WDT_EN,
126 GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
127 "WDT enable");
128
129 ath79_register_wmac(art + N5Q_WMAC_CALDATA_OFFSET, NULL);
130 }
131
132 MIPS_MACHINE(ATH79_MACH_N5Q, "N5Q", "ALFA Network N5Q", n5q_setup);