target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh2.c

   1 /*
   2  *  Buffalo WZR-HP-G300NH2 board support
   3  *
   4  *  Copyright (C) 2011 Felix Fietkau <nbd@nbd.name>
   5  *  Copyright (C) 2011 Mark Deneen <mdeneen@gmail.com>
   6  *
   7  *  This program is free software; you can redistribute it and/or modify it
   8  *  under the terms of the GNU General Public License version 2 as published
   9  *  by the Free Software Foundation.
  10  */
  11
  12 #include <linux/gpio.h>
  13 #include <linux/mtd/mtd.h>
  14 #include <linux/mtd/partitions.h>
  15
  16 #include <asm/mach-ath79/ath79.h>
  17
  18 #include "dev-ap9x-pci.h"
  19 #include "dev-eth.h"
  20 #include "dev-gpio-buttons.h"
  21 #include "dev-leds-gpio.h"
  22 #include "dev-m25p80.h"
  23 #include "dev-usb.h"
  24 #include "machtypes.h"
  25
  26 #define WZRHPG300NH2_MAC_OFFSET         0x20c
  27 #define WZRHPG300NH2_KEYS_POLL_INTERVAL     20      /* msecs */
  28 #define WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH2_KEYS_POLL_INTERVAL)
  29
  30 static struct mtd_partition wzrhpg300nh2_flash_partitions[] = {
  31         {
  32                 .name           = "u-boot",
  33                 .offset         = 0,
  34                 .size           = 0x0040000,
  35                 .mask_flags     = MTD_WRITEABLE,
  36         }, {
  37                 .name           = "u-boot-env",
  38                 .offset         = 0x0040000,
  39                 .size           = 0x0010000,
  40                 .mask_flags     = MTD_WRITEABLE,
  41         }, {
  42                 .name           = "art",
  43                 .offset         = 0x0050000,
  44                 .size           = 0x0010000,
  45                 .mask_flags     = MTD_WRITEABLE,
  46         }, {
  47                 .name           = "firmware",
  48                 .offset         = 0x0060000,
  49                 .size           = 0x1f90000,
  50         }, {
  51                 .name           = "user_property",
  52                 .offset         = 0x1ff0000,
  53                 .size           = 0x0010000,
  54                 .mask_flags     = MTD_WRITEABLE,
  55         }
  56 };
  57
  58 static struct flash_platform_data wzrhpg300nh2_flash_data = {
  59         .parts          = wzrhpg300nh2_flash_partitions,
  60         .nr_parts       = ARRAY_SIZE(wzrhpg300nh2_flash_partitions),
  61 };
  62
  63 static struct gpio_led wzrhpg300nh2_leds_gpio[] __initdata = {
  64         {
  65                 .name           = "buffalo:red:diag",
  66                 .gpio           = 16,
  67                 .active_low     = 1,
  68         },
  69 };
  70
  71 static struct gpio_led wzrhpg300nh2_wmac_leds_gpio[] = {
  72         {
  73                 .name           = "buffalo:blue:usb",
  74                 .gpio           = 4,
  75                 .active_low     = 1,
  76         },
  77         {
  78                 .name           = "buffalo:green:wireless",
  79                 .gpio           = 5,
  80                 .active_low     = 1,
  81         },
  82         {
  83                 .name           = "buffalo:orange:security",
  84                 .gpio           = 6,
  85                 .active_low     = 1,
  86         },
  87         {
  88                 .name           = "buffalo:green:router",
  89                 .gpio           = 7,
  90                 .active_low     = 1,
  91         },
  92         {
  93                 .name           = "buffalo:blue:movie_engine_on",
  94                 .gpio           = 8,
  95                 .active_low     = 1,
  96         },
  97         {
  98                 .name           = "buffalo:blue:movie_engine_off",
  99                 .gpio           = 9,
 100                 .active_low     = 1,
 101         },
 102 };
 103
 104 /* The AOSS button is wmac gpio 12 */
 105 static struct gpio_keys_button wzrhpg300nh2_gpio_keys[] __initdata = {
 106         {
 107                 .desc           = "reset",
 108                 .type           = EV_KEY,
 109                 .code           = KEY_RESTART,
 110                 .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
 111                 .gpio           = 1,
 112                 .active_low     = 1,
 113         }, {
 114                 .desc           = "usb",
 115                 .type           = EV_KEY,
 116                 .code           = BTN_2,
 117                 .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
 118                 .gpio           = 7,
 119                 .active_low     = 1,
 120         }, {
 121                 .desc           = "qos",
 122                 .type           = EV_KEY,
 123                 .code           = BTN_3,
 124                 .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
 125                 .gpio           = 11,
 126                 .active_low     = 0,
 127         }, {
 128                 .desc           = "router_on",
 129                 .type           = EV_KEY,
 130                 .code           = BTN_5,
 131                 .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
 132                 .gpio           = 8,
 133                 .active_low     = 0,
 134         },
 135 };
 136
 137 static void __init wzrhpg300nh2_setup(void)
 138 {
 139
 140         u8 *eeprom = (u8 *)   KSEG1ADDR(0x1f051000);
 141         u8 *mac0   = eeprom + WZRHPG300NH2_MAC_OFFSET;
 142         /* There is an eth1 but it is not connected to the switch */
 143
 144         ath79_register_m25p80_multi(&wzrhpg300nh2_flash_data);
 145
 146         ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
 147         ath79_register_mdio(0, ~(BIT(0)));
 148
 149         ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
 150         ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
 151         ath79_eth0_data.speed = SPEED_1000;
 152         ath79_eth0_data.duplex = DUPLEX_FULL;
 153         ath79_eth0_data.phy_mask = BIT(0);
 154
 155         ath79_register_eth(0);
 156
 157         /* gpio13 is usb power.  Turn it on. */
 158         gpio_request_one(13, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
 159                          "USB power");
 160         ath79_register_usb();
 161
 162         ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh2_leds_gpio),
 163                                  wzrhpg300nh2_leds_gpio);
 164         ath79_register_gpio_keys_polled(-1, WZRHPG300NH2_KEYS_POLL_INTERVAL,
 165                                         ARRAY_SIZE(wzrhpg300nh2_gpio_keys),
 166                                         wzrhpg300nh2_gpio_keys);
 167         ap9x_pci_setup_wmac_leds(0, wzrhpg300nh2_wmac_leds_gpio,
 168                                 ARRAY_SIZE(wzrhpg300nh2_wmac_leds_gpio));
 169
 170         ap91_pci_init(eeprom, mac0);
 171 }
 172
 173 MIPS_MACHINE(ATH79_MACH_WZR_HP_G300NH2, "WZR-HP-G300NH2",
 174              "Buffalo WZR-HP-G300NH2", wzrhpg300nh2_setup);