target/linux/ar71xx/files/drivers/mtd/nand/rb750_nand.c

   1 /*
   2  *  NAND flash driver for the MikroTik RouterBOARD 750
   3  *
   4  *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
   5  *
   6  *  This program is free software; you can redistribute it and/or modify it
   7  *  under the terms of the GNU General Public License version 2 as published
   8  *  by the Free Software Foundation.
   9  */
  10
  11 #include <linux/init.h>
  12 #include <linux/mtd/nand.h>
  13 #include <linux/mtd/mtd.h>
  14 #include <linux/mtd/partitions.h>
  15 #include <linux/platform_device.h>
  16 #include <linux/io.h>
  17 #include <linux/slab.h>
  18
  19 #include <asm/mach-ar71xx/ar71xx.h>
  20 #include <asm/mach-ar71xx/mach-rb750.h>
  21
  22 #define DRV_NAME        "rb750-nand"
  23 #define DRV_VERSION     "0.1.0"
  24 #define DRV_DESC        "NAND flash driver for the RouterBOARD 750"
  25
  26 #define RB750_NAND_IO0          BIT(RB750_GPIO_NAND_IO0)
  27 #define RB750_NAND_ALE          BIT(RB750_GPIO_NAND_ALE)
  28 #define RB750_NAND_CLE          BIT(RB750_GPIO_NAND_CLE)
  29 #define RB750_NAND_NRE          BIT(RB750_GPIO_NAND_NRE)
  30 #define RB750_NAND_NWE          BIT(RB750_GPIO_NAND_NWE)
  31 #define RB750_NAND_RDY          BIT(RB750_GPIO_NAND_RDY)
  32 #define RB750_NAND_NCE          BIT(RB750_GPIO_NAND_NCE)
  33
  34 #define RB750_NAND_DATA_SHIFT   1
  35 #define RB750_NAND_DATA_BITS    (0xff << RB750_NAND_DATA_SHIFT)
  36 #define RB750_NAND_INPUT_BITS   (RB750_NAND_DATA_BITS | RB750_NAND_RDY)
  37 #define RB750_NAND_OUTPUT_BITS  (RB750_NAND_ALE | RB750_NAND_CLE | \
  38                                  RB750_NAND_NRE | RB750_NAND_NWE | \
  39                                  RB750_NAND_NCE)
  40
  41 struct rb750_nand_info {
  42         struct nand_chip        chip;
  43         struct mtd_info         mtd;
  44 };
  45
  46 /*
  47  * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
  48  * will not be able to find the kernel that we load.
  49  */
  50 static struct nand_ecclayout rb750_nand_ecclayout = {
  51         .eccbytes       = 6,
  52         .eccpos         = { 8, 9, 10, 13, 14, 15 },
  53         .oobavail       = 9,
  54         .oobfree        = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
  55 };
  56
  57 static struct mtd_partition rb750_nand_partitions[] = {
  58         {
  59                 .name   = "booter",
  60                 .offset = 0,
  61                 .size   = (256 * 1024),
  62                 .mask_flags = MTD_WRITEABLE,
  63         }, {
  64                 .name   = "kernel",
  65                 .offset = (256 * 1024),
  66                 .size   = (4 * 1024 * 1024) - (256 * 1024),
  67         }, {
  68                 .name   = "rootfs",
  69                 .offset = MTDPART_OFS_NXTBLK,
  70                 .size   = MTDPART_SIZ_FULL,
  71         },
  72 };
  73
  74 static void rb750_nand_write(const u8 *buf, unsigned len)
  75 {
  76         void __iomem *base = ar71xx_gpio_base;
  77         u32 out;
  78         u32 t;
  79         unsigned i;
  80
  81         /* set data lines to output mode */
  82         t = __raw_readl(base + AR71XX_GPIO_REG_OE);
  83         __raw_writel(t | RB750_NAND_DATA_BITS, base + AR71XX_GPIO_REG_OE);
  84
  85         out = __raw_readl(base + AR71XX_GPIO_REG_OUT);
  86         out &= ~(RB750_NAND_DATA_BITS | RB750_NAND_NWE);
  87         for (i = 0; i != len; i++) {
  88                 u32 data;
  89
  90                 data = buf[i];
  91                 data <<= RB750_NAND_DATA_SHIFT;
  92                 data |= out;
  93                 __raw_writel(data, base + AR71XX_GPIO_REG_OUT);
  94
  95                 __raw_writel(data | RB750_NAND_NWE, base + AR71XX_GPIO_REG_OUT);
  96                 /* flush write */
  97                 __raw_readl(base + AR71XX_GPIO_REG_OUT);
  98         }
  99
 100         /* set data lines to input mode */
 101         t = __raw_readl(base + AR71XX_GPIO_REG_OE);
 102         __raw_writel(t & ~RB750_NAND_DATA_BITS, base + AR71XX_GPIO_REG_OE);
 103         /* flush write */
 104         __raw_readl(base + AR71XX_GPIO_REG_OE);
 105 }
 106
 107 static int rb750_nand_read_verify(u8 *read_buf, unsigned len,
 108                                   const u8 *verify_buf)
 109 {
 110         void __iomem *base = ar71xx_gpio_base;
 111         unsigned i;
 112
 113         for (i = 0; i < len; i++) {
 114                 u8 data;
 115
 116                 /* activate RE line */
 117                 __raw_writel(RB750_NAND_NRE, base + AR71XX_GPIO_REG_CLEAR);
 118                 /* flush write */
 119                 __raw_readl(base + AR71XX_GPIO_REG_CLEAR);
 120
 121                 /* read input lines */
 122                 data = __raw_readl(base + AR71XX_GPIO_REG_IN) >>
 123                        RB750_NAND_DATA_SHIFT;
 124
 125                 /* deactivate RE line */
 126                 __raw_writel(RB750_NAND_NRE, base + AR71XX_GPIO_REG_SET);
 127
 128                 if (read_buf)
 129                         read_buf[i] = data;
 130                 else if (verify_buf && verify_buf[i] != data)
 131                         return -EFAULT;
 132         }
 133
 134         return 0;
 135 }
 136
 137 static void rb750_nand_select_chip(struct mtd_info *mtd, int chip)
 138 {
 139         void __iomem *base = ar71xx_gpio_base;
 140         u32 func;
 141         u32 t;
 142
 143         func = __raw_readl(base + AR71XX_GPIO_REG_FUNC);
 144         if (chip >= 0) {
 145                 /* disable latch */
 146                 rb750_latch_change(RB750_LVC573_LE, 0);
 147
 148                 /* disable alternate functions */
 149                 ar71xx_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
 150                                            AR724X_GPIO_FUNC_SPI_EN);
 151
 152                 /* set input mode for data lines */
 153                 t = __raw_readl(base + AR71XX_GPIO_REG_OE);
 154                 __raw_writel(t & ~RB750_NAND_INPUT_BITS,
 155                              base + AR71XX_GPIO_REG_OE);
 156
 157                 /* deactivate RE and WE lines */
 158                 __raw_writel(RB750_NAND_NRE | RB750_NAND_NWE,
 159                              base + AR71XX_GPIO_REG_SET);
 160                 /* flush write */
 161                 (void) __raw_readl(base + AR71XX_GPIO_REG_SET);
 162
 163                 /* activate CE line */
 164                 __raw_writel(RB750_NAND_NCE, base + AR71XX_GPIO_REG_CLEAR);
 165         } else {
 166                 /* deactivate CE line */
 167                 __raw_writel(RB750_NAND_NCE, base + AR71XX_GPIO_REG_SET);
 168                 /* flush write */
 169                 (void) __raw_readl(base + AR71XX_GPIO_REG_SET);
 170
 171                 t = __raw_readl(base + AR71XX_GPIO_REG_OE);
 172                 __raw_writel(t | RB750_NAND_IO0 | RB750_NAND_RDY,
 173                              base + AR71XX_GPIO_REG_OE);
 174
 175                 /* restore alternate functions */
 176                 ar71xx_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN,
 177                                            AR724X_GPIO_FUNC_JTAG_DISABLE);
 178
 179                 /* enable latch */
 180                 rb750_latch_change(0, RB750_LVC573_LE);
 181         }
 182 }
 183
 184 static int rb750_nand_dev_ready(struct mtd_info *mtd)
 185 {
 186         void __iomem *base = ar71xx_gpio_base;
 187
 188         return !!(__raw_readl(base + AR71XX_GPIO_REG_IN) & RB750_NAND_RDY);
 189 }
 190
 191 static void rb750_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
 192                                 unsigned int ctrl)
 193 {
 194         if (ctrl & NAND_CTRL_CHANGE) {
 195                 void __iomem *base = ar71xx_gpio_base;
 196                 u32 t;
 197
 198                 t = __raw_readl(base + AR71XX_GPIO_REG_OUT);
 199
 200                 t &= ~(RB750_NAND_CLE | RB750_NAND_ALE);
 201                 t |= (ctrl & NAND_CLE) ? RB750_NAND_CLE : 0;
 202                 t |= (ctrl & NAND_ALE) ? RB750_NAND_ALE : 0;
 203
 204                 __raw_writel(t, base + AR71XX_GPIO_REG_OUT);
 205                 /* flush write */
 206                 __raw_readl(base + AR71XX_GPIO_REG_OUT);
 207         }
 208
 209         if (cmd != NAND_CMD_NONE) {
 210                 u8 t = cmd;
 211                 rb750_nand_write(&t, 1);
 212         }
 213 }
 214
 215 static u8 rb750_nand_read_byte(struct mtd_info *mtd)
 216 {
 217         u8 data = 0;
 218         rb750_nand_read_verify(&data, 1, NULL);
 219         return data;
 220 }
 221
 222 static void rb750_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len)
 223 {
 224         rb750_nand_read_verify(buf, len, NULL);
 225 }
 226
 227 static void rb750_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
 228 {
 229         rb750_nand_write(buf, len);
 230 }
 231
 232 static int rb750_nand_verify_buf(struct mtd_info *mtd, const u8 *buf, int len)
 233 {
 234         return rb750_nand_read_verify(NULL, len, buf);
 235 }
 236
 237 static void __init rb750_nand_gpio_init(void)
 238 {
 239         void __iomem *base = ar71xx_gpio_base;
 240         u32 out;
 241         u32 t;
 242
 243         out = __raw_readl(base + AR71XX_GPIO_REG_OUT);
 244
 245         /* setup output levels */
 246         __raw_writel(RB750_NAND_NCE | RB750_NAND_NRE | RB750_NAND_NWE,
 247                      base + AR71XX_GPIO_REG_SET);
 248
 249         __raw_writel(RB750_NAND_ALE | RB750_NAND_CLE,
 250                      base + AR71XX_GPIO_REG_CLEAR);
 251
 252         /* setup input lines */
 253         t = __raw_readl(base + AR71XX_GPIO_REG_OE);
 254         __raw_writel(t & ~(RB750_NAND_INPUT_BITS), base + AR71XX_GPIO_REG_OE);
 255
 256         /* setup output lines */
 257         t = __raw_readl(base + AR71XX_GPIO_REG_OE);
 258         __raw_writel(t | RB750_NAND_OUTPUT_BITS, base + AR71XX_GPIO_REG_OE);
 259
 260         rb750_latch_change(~out & RB750_NAND_IO0, out & RB750_NAND_IO0);
 261 }
 262
 263 static int __devinit rb750_nand_probe(struct platform_device *pdev)
 264 {
 265         struct rb750_nand_info  *info;
 266         int ret;
 267
 268         printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
 269
 270         rb750_nand_gpio_init();
 271
 272         info = kzalloc(sizeof(*info), GFP_KERNEL);
 273         if (!info)
 274                 return -ENOMEM;
 275
 276         info->chip.priv = &info;
 277         info->mtd.priv  = &info->chip;
 278         info->mtd.owner = THIS_MODULE;
 279
 280         info->chip.select_chip  = rb750_nand_select_chip;
 281         info->chip.cmd_ctrl     = rb750_nand_cmd_ctrl;
 282         info->chip.dev_ready    = rb750_nand_dev_ready;
 283         info->chip.read_byte    = rb750_nand_read_byte;
 284         info->chip.write_buf    = rb750_nand_write_buf;
 285         info->chip.read_buf     = rb750_nand_read_buf;
 286         info->chip.verify_buf   = rb750_nand_verify_buf;
 287
 288         info->chip.chip_delay   = 25;
 289         info->chip.ecc.mode     = NAND_ECC_SOFT;
 290         info->chip.options      |= NAND_NO_AUTOINCR;
 291
 292         platform_set_drvdata(pdev, info);
 293
 294         ret = nand_scan_ident(&info->mtd, 1, NULL);
 295         if (ret) {
 296                 ret = -ENXIO;
 297                 goto err_free_info;
 298         }
 299
 300         if (info->mtd.writesize == 512)
 301                 info->chip.ecc.layout = &rb750_nand_ecclayout;
 302
 303         ret = nand_scan_tail(&info->mtd);
 304         if (ret) {
 305                 return -ENXIO;
 306                 goto err_set_drvdata;
 307         }
 308
 309 #ifdef CONFIG_MTD_PARTITIONS
 310         ret = add_mtd_partitions(&info->mtd, rb750_nand_partitions,
 311                                  ARRAY_SIZE(rb750_nand_partitions));
 312 #else
 313         ret = add_mtd_device(&info->mtd);
 314 #endif
 315         if (ret)
 316                 goto err_release_nand;
 317
 318         return 0;
 319
 320 err_release_nand:
 321         nand_release(&info->mtd);
 322 err_set_drvdata:
 323         platform_set_drvdata(pdev, NULL);
 324 err_free_info:
 325         kfree(info);
 326         return ret;
 327 }
 328
 329 static int __devexit rb750_nand_remove(struct platform_device *pdev)
 330 {
 331         struct rb750_nand_info *info = platform_get_drvdata(pdev);
 332
 333         nand_release(&info->mtd);
 334         platform_set_drvdata(pdev, NULL);
 335         kfree(info);
 336
 337         return 0;
 338 }
 339
 340 static struct platform_driver rb750_nand_driver = {
 341         .probe  = rb750_nand_probe,
 342         .remove = __devexit_p(rb750_nand_remove),
 343         .driver = {
 344                 .name   = DRV_NAME,
 345                 .owner  = THIS_MODULE,
 346         },
 347 };
 348
 349 static int __init rb750_nand_init(void)
 350 {
 351         return platform_driver_register(&rb750_nand_driver);
 352 }
 353
 354 static void __exit rb750_nand_exit(void)
 355 {
 356         platform_driver_unregister(&rb750_nand_driver);
 357 }
 358
 359 module_init(rb750_nand_init);
 360 module_exit(rb750_nand_exit);
 361
 362 MODULE_DESCRIPTION(DRV_DESC);
 363 MODULE_VERSION(DRV_VERSION);
 364 MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
 365 MODULE_LICENSE("GPL v2");