ar71xx: Add support for AP147-010 reference board
[openwrt/openwrt.git] / target / linux / ar71xx / patches-4.1 / 605-MIPS-ath79-db120-fixes.patch
1 --- a/arch/mips/ath79/mach-db120.c
2 +++ b/arch/mips/ath79/mach-db120.c
3 @@ -2,7 +2,7 @@
4 * Atheros DB120 reference board support
5 *
6 * Copyright (c) 2011 Qualcomm Atheros
7 - * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
8 + * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
9 *
10 * Permission to use, copy, modify, and/or distribute this software for any
11 * purpose with or without fee is hereby granted, provided that the above
12 @@ -19,16 +19,26 @@
13 */
14
15 #include <linux/pci.h>
16 +#include <linux/phy.h>
17 +#include <linux/platform_device.h>
18 #include <linux/ath9k_platform.h>
19 +#include <linux/ar8216_platform.h>
20
21 -#include "machtypes.h"
22 +#include <asm/mach-ath79/ar71xx_regs.h>
23 +
24 +#include "common.h"
25 +#include "dev-ap9x-pci.h"
26 +#include "dev-eth.h"
27 #include "dev-gpio-buttons.h"
28 #include "dev-leds-gpio.h"
29 +#include "dev-m25p80.h"
30 +#include "dev-nfc.h"
31 #include "dev-spi.h"
32 #include "dev-usb.h"
33 #include "dev-wmac.h"
34 -#include "pci.h"
35 +#include "machtypes.h"
36
37 +#define DB120_GPIO_LED_USB 11
38 #define DB120_GPIO_LED_WLAN_5G 12
39 #define DB120_GPIO_LED_WLAN_2G 13
40 #define DB120_GPIO_LED_STATUS 14
41 @@ -39,8 +49,10 @@
42 #define DB120_KEYS_POLL_INTERVAL 20 /* msecs */
43 #define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL)
44
45 -#define DB120_WMAC_CALDATA_OFFSET 0x1000
46 -#define DB120_PCIE_CALDATA_OFFSET 0x5000
47 +#define DB120_MAC0_OFFSET 0
48 +#define DB120_MAC1_OFFSET 6
49 +#define DB120_WMAC_CALDATA_OFFSET 0x1000
50 +#define DB120_PCIE_CALDATA_OFFSET 0x5000
51
52 static struct gpio_led db120_leds_gpio[] __initdata = {
53 {
54 @@ -63,6 +75,11 @@ static struct gpio_led db120_leds_gpio[]
55 .gpio = DB120_GPIO_LED_WLAN_2G,
56 .active_low = 1,
57 },
58 + {
59 + .name = "db120:green:usb",
60 + .gpio = DB120_GPIO_LED_USB,
61 + .active_low = 1,
62 + }
63 };
64
65 static struct gpio_keys_button db120_gpio_keys[] __initdata = {
66 @@ -76,60 +93,85 @@ static struct gpio_keys_button db120_gpi
67 },
68 };
69
70 -static struct spi_board_info db120_spi_info[] = {
71 - {
72 - .bus_num = 0,
73 - .chip_select = 0,
74 - .max_speed_hz = 25000000,
75 - .modalias = "s25sl064a",
76 - }
77 +static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
78 + .mode = AR8327_PAD_MAC_RGMII,
79 + .txclk_delay_en = true,
80 + .rxclk_delay_en = true,
81 + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
82 + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
83 };
84
85 -static struct ath79_spi_platform_data db120_spi_data = {
86 - .bus_num = 0,
87 - .num_chipselect = 1,
88 +static struct ar8327_led_cfg db120_ar8327_led_cfg = {
89 + .led_ctrl0 = 0x00000000,
90 + .led_ctrl1 = 0xc737c737,
91 + .led_ctrl2 = 0x00000000,
92 + .led_ctrl3 = 0x00c30c00,
93 + .open_drain = true,
94 };
95
96 -#ifdef CONFIG_PCI
97 -static struct ath9k_platform_data db120_ath9k_data;
98 -
99 -static int db120_pci_plat_dev_init(struct pci_dev *dev)
100 -{
101 - switch (PCI_SLOT(dev->devfn)) {
102 - case 0:
103 - dev->dev.platform_data = &db120_ath9k_data;
104 - break;
105 - }
106 -
107 - return 0;
108 -}
109 -
110 -static void __init db120_pci_init(u8 *eeprom)
111 -{
112 - memcpy(db120_ath9k_data.eeprom_data, eeprom,
113 - sizeof(db120_ath9k_data.eeprom_data));
114 +static struct ar8327_platform_data db120_ar8327_data = {
115 + .pad0_cfg = &db120_ar8327_pad0_cfg,
116 + .port0_cfg = {
117 + .force_link = 1,
118 + .speed = AR8327_PORT_SPEED_1000,
119 + .duplex = 1,
120 + .txpause = 1,
121 + .rxpause = 1,
122 + },
123 + .led_cfg = &db120_ar8327_led_cfg,
124 +};
125
126 - ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
127 - ath79_register_pci();
128 -}
129 -#else
130 -static inline void db120_pci_init(u8 *eeprom) {}
131 -#endif /* CONFIG_PCI */
132 +static struct mdio_board_info db120_mdio0_info[] = {
133 + {
134 + .bus_id = "ag71xx-mdio.0",
135 + .phy_addr = 0,
136 + .platform_data = &db120_ar8327_data,
137 + },
138 +};
139
140 static void __init db120_setup(void)
141 {
142 u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
143
144 + ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO);
145 + ath79_register_m25p80(NULL);
146 +
147 ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
148 db120_leds_gpio);
149 ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
150 ARRAY_SIZE(db120_gpio_keys),
151 db120_gpio_keys);
152 - ath79_register_spi(&db120_spi_data, db120_spi_info,
153 - ARRAY_SIZE(db120_spi_info));
154 ath79_register_usb();
155 ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
156 - db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
157 + ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL);
158 +
159 + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
160 + AR934X_ETH_CFG_SW_ONLY_MODE);
161 +
162 + ath79_register_mdio(1, 0x0);
163 + ath79_register_mdio(0, 0x0);
164 +
165 + ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0);
166 +
167 + mdiobus_register_board_info(db120_mdio0_info,
168 + ARRAY_SIZE(db120_mdio0_info));
169 +
170 + /* GMAC0 is connected to an AR8327 switch */
171 + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
172 + ath79_eth0_data.phy_mask = BIT(0);
173 + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
174 + ath79_eth0_pll_data.pll_1000 = 0x06000000;
175 + ath79_register_eth(0);
176 +
177 + /* GMAC1 is connected to the internal switch */
178 + ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0);
179 + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
180 + ath79_eth1_data.speed = SPEED_1000;
181 + ath79_eth1_data.duplex = DUPLEX_FULL;
182 +
183 + ath79_register_eth(1);
184 +
185 + ath79_register_nfc();
186 }
187
188 MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
189 --- a/arch/mips/ath79/Kconfig
190 +++ b/arch/mips/ath79/Kconfig
191 @@ -43,9 +43,12 @@ config ATH79_MACH_AP81
192 config ATH79_MACH_DB120
193 bool "Atheros DB120 reference board"
194 select SOC_AR934X
195 + select ATH79_DEV_AP9X_PCI if PCI
196 + select ATH79_DEV_ETH
197 select ATH79_DEV_GPIO_BUTTONS
198 select ATH79_DEV_LEDS_GPIO
199 - select ATH79_DEV_SPI
200 + select ATH79_DEV_M25P80
201 + select ATH79_DEV_NFC
202 select ATH79_DEV_USB
203 select ATH79_DEV_WMAC
204 help