target/linux/ar71xx/patches-4.1/815-MIPS-ath79-add-mr1750-support.patch

   1 --- a/arch/mips/ath79/Kconfig
   2 +++ b/arch/mips/ath79/Kconfig
   3 @@ -900,6 +900,16 @@ config ATH79_MACH_CAP4200AG
   4         select ATH79_DEV_M25P80
   5         select ATH79_DEV_WMAC
   6
   7 +config ATH79_MACH_MR1750
   8 +       bool "OpenMesh MR1750 board support"
   9 +       select SOC_QCA955X
  10 +       select ATH79_DEV_AP9X_PCI if PCI
  11 +       select ATH79_DEV_ETH
  12 +       select ATH79_DEV_GPIO_BUTTONS
  13 +       select ATH79_DEV_LEDS_GPIO
  14 +       select ATH79_DEV_M25P80
  15 +       select ATH79_DEV_WMAC
  16 +
  17  config ATH79_MACH_MR900
  18         bool "OpenMesh MR900 board support"
  19         select SOC_QCA955X
  20 --- a/arch/mips/ath79/Makefile
  21 +++ b/arch/mips/ath79/Makefile
  22 @@ -91,6 +91,7 @@ obj-$(CONFIG_ATH79_MACH_HORNET_UB)    += ma
  23  obj-$(CONFIG_ATH79_MACH_MC_MAC1200R)     += mach-mc-mac1200r.o
  24  obj-$(CONFIG_ATH79_MACH_MR12)          += mach-mr12.o
  25  obj-$(CONFIG_ATH79_MACH_MR16)          += mach-mr16.o
  26 +obj-$(CONFIG_ATH79_MACH_MR1750)                += mach-mr1750.o
  27  obj-$(CONFIG_ATH79_MACH_MR600)         += mach-mr600.o
  28  obj-$(CONFIG_ATH79_MACH_MR900)         += mach-mr900.o
  29  obj-$(CONFIG_ATH79_MACH_MYNET_N600)    += mach-mynet-n600.o
  30 --- a/arch/mips/ath79/machtypes.h
  31 +++ b/arch/mips/ath79/machtypes.h
  32 @@ -80,6 +80,7 @@ enum ath79_mach_type {
  33         ATH79_MACH_HORNET_UB,           /* ALFA Networks Hornet-UB */
  34         ATH79_MACH_MR12,                /* Cisco Meraki MR12 */
  35         ATH79_MACH_MR16,                /* Cisco Meraki MR16 */
  36 +       ATH79_MACH_MR1750,              /* OpenMesh MR1750 */
  37         ATH79_MACH_MR600V2,             /* OpenMesh MR600v2 */
  38         ATH79_MACH_MR600,               /* OpenMesh MR600 */
  39         ATH79_MACH_MR900,               /* OpenMesh MR900 */