target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "ar7100.dtsi"
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_power_orange;
  11                 led-failsafe = &led_power_orange;
  12                 led-running = &led_power_green;
  13                 led-upgrade = &led_power_orange;
  14                 label-mac-device = &eth0;
  15         };
  16
  17         chosen {
  18                 bootargs = "console=ttyS0,115200";
  19         };
  20
  21         extosc: ref {
  22                 compatible = "fixed-clock";
  23                 #clock-cells = <0>;
  24                 clock-output-names = "ref";
  25                 clock-frequency = <40000000>;
  26         };
  27
  28         reset-leds {
  29                 compatible = "reset-leds";
  30
  31                 usb_led {
  32                         label = "netgear:green:usb";
  33                         resets = <&rst 12>;
  34                         trigger-sources = <&usb_ohci_port>, <&usb_ehci_port>;
  35                         linux,default-trigger = "usbport";
  36                 };
  37         };
  38
  39         leds {
  40                 compatible = "gpio-leds";
  41
  42                 wps {
  43                         label = "netgear:orange:wps";
  44                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 led_power_green: power_green {
  48                         label = "netgear:green:power";
  49                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 led_power_orange: power_orange {
  53                         label = "netgear:orange:power";
  54                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  55                         default-state = "on";
  56                 };
  57
  58                 wps_green {
  59                         label = "netgear:green:wps";
  60                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  61                 };
  62
  63                 wan_green {
  64                         label = "netgear:green:wan";
  65                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  66                 };
  67         };
  68
  69         ath9k-leds {
  70                 compatible = "gpio-leds";
  71
  72                 wlan2g {
  73                         label = "netgear:green:wlan2g";
  74                         gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
  75                         linux,default-trigger = "phy0tpt";
  76                 };
  77                 wlan5g {
  78                         label = "netgear:blue:wlan5g";
  79                         gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
  80                         linux,default-trigger = "phy1tpt";
  81                 };
  82         };
  83
  84         keys {
  85                 compatible = "gpio-keys";
  86
  87                 wps {
  88                         label = "wps";
  89                         linux,code = <KEY_WPS_BUTTON>;
  90                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  91                 };
  92
  93                 reset {
  94                         label = "reset";
  95                         linux,code = <KEY_RESTART>;
  96                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  97                 };
  98
  99                 rfkill {
 100                         label = "rfkill";
 101                         linux,code = <KEY_RFKILL>;
 102                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 103                 };
 104         };
 105
 106         rtl8366s {
 107                 compatible = "realtek,rtl8366s";
 108
 109                 gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
 110                 gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
 111
 112                 mdio-bus {
 113                         #address-cells = <1>;
 114                         #size-cells = <0>;
 115                         status = "okay";
 116
 117                         phy-mask = <0x10>;
 118
 119                         phy4: ethernet-phy@4 {
 120                                 reg = <4>;
 121                                 phy-mode = "rgmii";
 122                         };
 123                 };
 124         };
 125 };
 126
 127 &usb_phy {
 128         status = "okay";
 129 };
 130
 131 &usb1 {
 132         #address-cells = <1>;
 133         #size-cells = <0>;
 134         status = "okay";
 135
 136         usb_ohci_port: port@1 {
 137                 reg = <1>;
 138                 #trigger-source-cells = <0>;
 139         };
 140 };
 141
 142 &usb2 {
 143         #address-cells = <1>;
 144         #size-cells = <0>;
 145         status = "okay";
 146
 147         usb_ehci_port: port@1 {
 148                 reg = <1>;
 149                 #trigger-source-cells = <0>;
 150         };
 151 };
 152
 153 &pcie0 {
 154         status = "okay";
 155
 156         ath9k0: wifi@0,11 {
 157                 compatible = "pci168c,0029";
 158                 reg = <0x8800 0 0 0 0>;
 159                 mtd-mac-address = <&art 0x0>;
 160                 qca,no-eeprom;
 161                 #gpio-cells = <2>;
 162                 gpio-controller;
 163         };
 164
 165         ath9k1: wifi@0,12 {
 166                 compatible = "pci168c,0029";
 167                 reg = <0x9000 0 0 0 0>;
 168                 mtd-mac-address = <&art 0xc>;
 169                 qca,no-eeprom;
 170                 #gpio-cells = <2>;
 171                 gpio-controller;
 172         };
 173 };
 174
 175 &uart {
 176         status = "okay";
 177 };
 178
 179 &spi {
 180         status = "okay";
 181
 182         num-cs = <1>;
 183
 184         flash@0 {
 185                 compatible = "jedec,spi-nor";
 186                 reg = <0>;
 187                 spi-max-frequency = <25000000>;
 188
 189                 partitions: partitions {
 190                         compatible = "fixed-partitions";
 191                         #address-cells = <1>;
 192                         #size-cells = <1>;
 193                 };
 194         };
 195 };
 196
 197 &eth0 {
 198         status = "okay";
 199
 200         pll-data = <0x11110000 0x00001099 0x00991099>;
 201
 202         mtd-mac-address = <&art 0x00>;
 203
 204         fixed-link {
 205                 speed = <1000>;
 206                 full-duplex;
 207         };
 208 };
 209
 210 &eth1 {
 211         status = "okay";
 212
 213         pll-data = <0x11110000 0x00001099 0x00991099>;
 214
 215         mtd-mac-address = <&art 0x06>;
 216
 217         phy-handle = <&phy4>;
 218 };