target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7240.dtsi"
   8
   9 / {
  10         compatible = "netgear,wnr612-v2", "qca,ar7240";
  11         model = "Netgear WNR612 V2";
  12
  13         aliases {
  14                 led-status = &led_power;
  15         };
  16
  17         gpio-keys-polled {
  18                 compatible = "gpio-keys-polled";
  19                 #address-cells = <1>;
  20                 #size-cells = <0>;
  21                 poll-interval = <20>;
  22
  23                 reset {
  24                         label = "reset";
  25                         linux,code = <KEY_RESTART>;
  26                         gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
  27                         debounce-interval = <60>;
  28                 };
  29         };
  30
  31         gpio-leds {
  32                 compatible = "gpio-leds";
  33                 led_power: power {
  34                         label = "netgear:green:power";
  35                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  36                 };
  37
  38                 lan1 {
  39                         label = "netgear:green:lan1";
  40                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  41                 };
  42
  43                 lan2 {
  44                         label = "netgear:green:lan2";
  45                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 wan {
  49                         label = "netgear:green:wan";
  50                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 wlan: wlan {
  54                         label = "netgear:green:wlan";
  55                         gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
  56                         default-state = "off";
  57                         linux,default-trigger = "phy0tpt";
  58                 };
  59         };
  60 };
  61
  62 &spi {
  63         status = "okay";
  64         num-cs = <1>;
  65
  66         flash@0 {
  67                 #address-cells = <1>;
  68                 #size-cells = <1>;
  69                 compatible = "jedec,spi-nor";
  70                 reg = <0>;
  71                 spi-max-frequency = <25000000>;
  72
  73                 partitions {
  74                         compatible = "fixed-partitions";
  75                         #address-cells = <1>;
  76                         #size-cells = <1>;
  77
  78                         uboot: partition@0 {
  79                                 reg = <0x0 0x40000>;
  80                                 label = "u-boot";
  81                                 read-only;
  82                         };
  83
  84                         partition@40000 {
  85                                 reg = <0x40000 0x10000>;
  86                                 label = "u-boot-env";
  87                         };
  88
  89                         partition@50000 {
  90                                 reg = <0x50000 0x3a0000>;
  91                                 label = "firmware";
  92                         };
  93
  94                         partition@3f0000 {
  95                                 reg = <0x3f0000 0x10000>;
  96                                 label = "art";
  97                                 read-only;
  98                         };
  99                 };
 100         };
 101 };
 102
 103 &eth0 {
 104         status = "okay";
 105
 106         phy-handle = <&phy4>;
 107
 108         mtd-mac-address = <&uboot 0x1fc00>;
 109         mtd-mac-address-increment = <(-1)>;
 110 };
 111
 112 &eth1 {
 113         status = "okay";
 114
 115         mtd-mac-address = <&uboot 0x1fc00>;
 116         mtd-mac-address-increment = <1>;
 117 };
 118
 119 &mdio0 {
 120         status = "okay";
 121
 122         phy4: ethernet-phy@4 {
 123                 reg = <4>;
 124                 phy-mode = "mii";
 125         };
 126 };
 127
 128 &pcie {
 129         status = "okay";
 130
 131         ath9k: wifi@168c,002b {
 132                 compatible = "pci168c,002b";
 133                 reg = <0x0000 0 0 0 0>;
 134                 qca,no-eeprom;
 135                 #gpio-cells = <2>;
 136                 gpio-controller;
 137         };
 138 };
 139
 140 &uart {
 141         status = "okay";
 142 };