target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7240.dtsi"
   8
   9 / {
  10         compatible = "netgear,wnr612-v2", "qca,ar7240";
  11         model = "Netgear WNR612 V2";
  12
  13         aliases {
  14                 led-status = &led_power;
  15         };
  16
  17         memory@0 {
  18                 device_type = "memory";
  19                 reg = <0x0 0x2000000>;
  20         };
  21
  22         gpio-keys-polled {
  23                 compatible = "gpio-keys-polled";
  24                 #address-cells = <1>;
  25                 #size-cells = <0>;
  26                 poll-interval = <20>;
  27
  28                 reset {
  29                         label = "reset";
  30                         linux,code = <KEY_RESTART>;
  31                         gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
  32                         debounce-interval = <60>;
  33                 };
  34         };
  35
  36         gpio-leds {
  37                 compatible = "gpio-leds";
  38                 led_power: power {
  39                         label = "netgear:green:power";
  40                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  41                 };
  42
  43                 lan1 {
  44                         label = "netgear:green:lan1";
  45                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 lan2 {
  49                         label = "netgear:green:lan2";
  50                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 wan {
  54                         label = "netgear:green:wan";
  55                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 wlan: wlan {
  59                         label = "netgear:green:wlan";
  60                         gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
  61                         default-state = "off";
  62                         linux,default-trigger = "phy0tpt";
  63                 };
  64         };
  65 };
  66
  67 &spi {
  68         status = "okay";
  69         num-cs = <1>;
  70
  71         flash@0 {
  72                 #address-cells = <1>;
  73                 #size-cells = <1>;
  74                 compatible = "jedec,spi-nor";
  75                 reg = <0>;
  76                 spi-max-frequency = <25000000>;
  77
  78                 partitions {
  79                         compatible = "fixed-partitions";
  80                         #address-cells = <1>;
  81                         #size-cells = <1>;
  82
  83                         uboot: partition@0 {
  84                                 reg = <0x0 0x40000>;
  85                                 label = "u-boot";
  86                                 read-only;
  87                         };
  88
  89                         partition@40000 {
  90                                 reg = <0x40000 0x10000>;
  91                                 label = "u-boot-env";
  92                         };
  93
  94                         partition@50000 {
  95                                 reg = <0x50000 0x3a0000>;
  96                                 label = "firmware";
  97                         };
  98
  99                         partition@3f0000 {
 100                                 reg = <0x3f0000 0x10000>;
 101                                 label = "art";
 102                                 read-only;
 103                         };
 104                 };
 105         };
 106 };
 107
 108 &eth0 {
 109         status = "okay";
 110
 111         phy-handle = <&phy4>;
 112
 113         mtd-mac-address = <&uboot 0x1fc00>;
 114         mtd-mac-address-increment = <(-1)>;
 115 };
 116
 117 &eth1 {
 118         status = "okay";
 119
 120         mtd-mac-address = <&uboot 0x1fc00>;
 121         mtd-mac-address-increment = <1>;
 122 };
 123
 124 &mdio0 {
 125         status = "okay";
 126
 127         phy4: ethernet-phy@4 {
 128                 reg = <4>;
 129                 phy-mode = "mii";
 130         };
 131 };
 132
 133 &pcie {
 134         status = "okay";
 135
 136         ath9k: wifi@168c,002b {
 137                 compatible = "pci168c,002b";
 138                 reg = <0x0000 0 0 0 0>;
 139                 qca,no-eeprom;
 140                 #gpio-cells = <2>;
 141                 gpio-controller;
 142         };
 143 };
 144
 145 &uart {
 146         status = "okay";
 147 };