target/linux/ath79/dts/ar7240_tl-wr740n-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7240.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wr740n-v2", "qca,ar7240";
  11         model = "TP-Link TL-WR740N v2";
  12
  13         aliases {
  14                 led-status = &led_system;
  15         };
  16
  17         gpio-keys-polled {
  18                 compatible = "gpio-keys-polled";
  19                 #address-cells = <1>;
  20                 #size-cells = <0>;
  21                 poll-interval = <20>;
  22
  23                 reset {
  24                         label = "reset";
  25                         linux,code = <KEY_RESTART>;
  26                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  27                         debounce-interval = <60>;
  28                 };
  29
  30                 wps {
  31                         label = "wps";
  32                         linux,code = <KEY_WPS_BUTTON>;
  33                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  34                         debounce-interval = <60>;
  35                 };
  36         };
  37
  38         gpio-leds {
  39                 compatible = "gpio-leds";
  40                 pinctrl-names = "default";
  41                 pinctrl-0 = <&switch_led_pins>;
  42
  43                 led_system: system {
  44                         label = "tl-wr740n-v2:green:system";
  45                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 lan1 {
  49                         label = "tl-wr740n-v2:green:lan1";
  50                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 lan2 {
  54                         label = "tl-wr740n-v2:green:lan2";
  55                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 lan3 {
  59                         label = "tl-wr740n-v2:green:lan3";
  60                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  61                 };
  62
  63                 lan4 {
  64                         label = "tl-wr740n-v2:green:lan4";
  65                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  66                 };
  67
  68                 wan {
  69                         label = "tl-wr740n-v2:green:wan";
  70                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  71                 };
  72
  73                 wlan {
  74                         label = "tl-wr740n-v2:green:wlan";
  75                         gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
  76                         default-state = "off";
  77                         linux,default-trigger = "phy0tpt";
  78                 };
  79
  80                 wps {
  81                         label = "tl-wr740n-v2:green:wps";
  82                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  83                 };
  84         };
  85 };
  86
  87 &spi {
  88         status = "okay";
  89         num-cs = <1>;
  90
  91         flash@0 {
  92                 #address-cells = <1>;
  93                 #size-cells = <1>;
  94                 compatible = "jedec,spi-nor";
  95                 reg = <0>;
  96                 spi-max-frequency = <25000000>;
  97
  98                 partitions {
  99                         compatible = "fixed-partitions";
 100                         #address-cells = <1>;
 101                         #size-cells = <1>;
 102
 103                         uboot: partition@0 {
 104                                 reg = <0x0 0x20000>;
 105                                 label = "u-boot";
 106                                 read-only;
 107                         };
 108
 109                         firmware: partition@20000 {
 110                                 reg = <0x20000 0x3d0000>;
 111                                 label = "firmware";
 112                         };
 113
 114                         art: partition@3f0000 {
 115                                 reg = <0x3f0000 0x10000>;
 116                                 label = "art";
 117                                 read-only;
 118                         };
 119                 };
 120         };
 121 };
 122
 123 &eth0 {
 124         status = "okay";
 125
 126         phy-handle = <&phy4>;
 127
 128         mtd-mac-address = <&uboot 0x1fc00>;
 129         mtd-mac-address-increment = <(-1)>;
 130 };
 131
 132 &eth1 {
 133         status = "okay";
 134
 135         mtd-mac-address = <&uboot 0x1fc00>;
 136         mtd-mac-address-increment = <1>;
 137 };
 138
 139 &mdio0 {
 140         status = "okay";
 141
 142         phy4: ethernet-phy@4 {
 143                 reg = <4>;
 144                 phy-mode = "mii";
 145         };
 146 };
 147
 148 &pcie {
 149         status = "okay";
 150
 151         ath9k: wifi@168c,002b {
 152                 compatible = "pci168c,002b";
 153                 reg = <0x0000 0 0 0 0>;
 154                 qca,no-eeprom;
 155                 mtd-mac-address = <&uboot 0x1fc00>;
 156                 #gpio-cells = <2>;
 157                 gpio-controller;
 158         };
 159 };
 160
 161 &pinmux {
 162         switch_led_pins: pinmux_switch_led_pins {
 163                 pinctrl-single,bits = <0x0 0x0 0xf8>;
 164         };
 165 };
 166
 167 &uart {
 168         status = "okay";
 169 };