target/linux/ath79/dts/ar7241_ubnt_unifi.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7241.dtsi"
   8
   9 / {
  10         compatible = "ubnt,unifi", "qca,ar7241";
  11         model = "Ubiquiti UniFi AP";
  12
  13         aliases {
  14                 led-status = &dome_green;
  15         };
  16
  17         extosc: ref {
  18                 compatible = "fixed-clock";
  19                 #clock-cells = <0>;
  20                 clock-frequency = <40000000>;
  21         };
  22
  23         keys {
  24                 compatible = "gpio-keys-polled";
  25                 #address-cells = <1>;
  26                 #size-cells = <0>;
  27
  28                 poll-interval = <20>;
  29                 reset {
  30                         linux,code = <KEY_RESTART>;
  31                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  32                         debounce-interval = <60>;
  33                 };
  34         };
  35
  36         leds {
  37                 compatible = "gpio-leds";
  38                 dome_green: dome-green {
  39                         label = "ubnt:green:dome";
  40                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  41                 };
  42
  43                 dome-orange {
  44                         label = "ubnt:orange:dome";
  45                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  46                 };
  47         };
  48 };
  49
  50 &uart {
  51         status = "okay";
  52 };
  53
  54 &pll {
  55         clocks = <&extosc>;
  56 };
  57
  58 &spi {
  59         status = "okay";
  60         num-cs = <1>;
  61
  62         flash@0 {
  63                 #address-cells = <1>;
  64                 #size-cells = <1>;
  65                 compatible = "jedec,spi-nor";
  66                 reg = <0>;
  67                 spi-max-frequency = <25000000>;
  68
  69                 partitions {
  70                         compatible = "fixed-partitions";
  71                         #address-cells = <1>;
  72                         #size-cells = <1>;
  73
  74                         partition@0 {
  75                                 label = "u-boot";
  76                                 reg = <0x000000 0x040000>;
  77                                 read-only;
  78                         };
  79
  80                         partition@1 {
  81                                 label = "u-boot-env";
  82                                 reg = <0x040000 0x010000>;
  83                         };
  84
  85                         partition@2 {
  86                                 label = "firmware";
  87                                 reg = <0x050000 0x750000>;
  88                         };
  89
  90                         partition@3 {
  91                                 label = "board_config";
  92                                 reg = <0x7a0000 0x010000>;
  93                                 read-only;
  94                         };
  95
  96                         partition@4 {
  97                                 label = "cfg";
  98                                 reg = <0x7b0000 0x040000>;
  99                                 read-only;
 100                         };
 101
 102                         art: partition@5 {
 103                                 label = "art";
 104                                 reg = <0x7f0000 0x010000>;
 105                                 read-only;
 106                         };
 107                 };
 108         };
 109 };
 110
 111 &pcie {
 112         status = "okay";
 113
 114         ath9k@0 {
 115                 reg = <0x0000 0 0 0 0>;
 116                 qca,no-eeprom;
 117         };
 118 };
 119
 120 &eth0 {
 121         status = "okay";
 122
 123         mtd-mac-address = <&art 0x0>;
 124 };
 125
 126 &eth1 {
 127         status = "okay";
 128
 129         compatible = "syscon", "simple-mfd";
 130 };