target/linux/ath79/dts/ar7241_ubnt_xm.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "ar7241.dtsi"
   7
   8 / {
   9         compatible = "ubnt,xm", "qca,ar7241";
  10         model = "Ubiquiti Networks XM (rev 1.0) board";
  11
  12         aliases {
  13                 led-boot = &link4;
  14                 led-failsafe = &link4;
  15         };
  16
  17 /*      extosc: ref {
  18                 compatible = "fixed-clock";
  19                 #clock-cells = <0>;
  20                 clock-frequency = <40000000>;
  21         };
  22 */
  23         keys {
  24                 compatible = "gpio-keys-polled";
  25                 poll-interval = <20>;
  26                 reset {
  27                         linux,code = <KEY_RESTART>;
  28                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  29                         debounce-interval = <60>;
  30                 };
  31         };
  32
  33         leds {
  34                 compatible = "gpio-leds";
  35                 link1 {
  36                         label = "ubnt:red:link1";
  37                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  38                 };
  39
  40                 link2 {
  41                         label = "ubnt:orange:link2";
  42                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  43                 };
  44
  45                 link3 {
  46                         label = "ubnt:green:link3";
  47                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  48                 };
  49
  50                 link4: link4 {
  51                         label = "ubnt:green:link4";
  52                         gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
  53                 };
  54         };
  55 };
  56
  57 &uart {
  58         status = "okay";
  59 };
  60
  61 /*&pll {
  62         clocks = <&extosc>;
  63 };*/
  64
  65 &spi {
  66         status = "okay";
  67         num-cs = <1>;
  68
  69         flash@0 {
  70                 compatible = "jedec,spi-nor";
  71                 reg = <0>;
  72                 spi-max-frequency = <25000000>;
  73
  74                 partitions {
  75                         compatible = "fixed-partitions";
  76                         #address-cells = <1>;
  77                         #size-cells = <1>;
  78
  79                         partition@0 {
  80                                 label = "u-boot";
  81                                 reg = <0x000000 0x040000>;
  82                                 read-only;
  83                         };
  84
  85                         partition@1 {
  86                                 label = "u-boot-env";
  87                                 reg = <0x040000 0x010000>;
  88                         };
  89
  90                         partition@2 {
  91                                 label = "firmware";
  92                                 reg = <0x050000 0x750000>;
  93                         };
  94
  95                         partition@3 {
  96                                 label = "board_config";
  97                                 reg = <0x7a0000 0x010000>;
  98                                 read-only;
  99                         };
 100
 101                         partition@4 {
 102                                 label = "cfg";
 103                                 reg = <0x7b0000 0x040000>;
 104                                 read-only;
 105                         };
 106
 107                         art: partition@5 {
 108                                 label = "art";
 109                                 reg = <0x7f0000 0x010000>;
 110                                 read-only;
 111                         };
 112                 };
 113         };
 114 };
 115
 116 &pcie {
 117         status = "okay";
 118
 119         wifi@0,0 {
 120                 reg = <0x0000 0 0 0 0>;
 121                 qca,no-eeprom;
 122         };
 123 };
 124
 125 &eth0 {
 126         status = "okay";
 127
 128         mtd-mac-address = <&art 0x0>;
 129 };
 130
 131 &eth1 {
 132         status = "okay";
 133
 134         mtd-mac-address = <&art 0x6>;
 135 };