target/linux/ath79/dts/ar7242.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "ar724x.dtsi"
   4
   5 / {
   6         usb_phy: usb-phy {
   7                 compatible = "qca,ar7200-usb-phy";
   8
   9                 reset-names = "usb-phy", "usb-suspend-override";
  10                 resets = <&rst 4>, <&rst 3>;
  11
  12                 #phy-cells = <0>;
  13
  14                 status = "disabled";
  15         };
  16 };
  17
  18 &gpio {
  19         ngpios = <20>;
  20 };
  21
  22 &ahb {
  23         usb: usb@1b000000 {
  24                 compatible = "generic-ehci";
  25                 reg = <0x1b000000 0x1000>;
  26
  27                 interrupts = <3>;
  28
  29                 resets = <&rst 5>;
  30                 reset-names = "usb-host";
  31
  32                 has-transaction-translator;
  33                 caps-offset = <0x100>;
  34
  35                 phy-names = "usb-phy";
  36                 phys = <&usb_phy>;
  37
  38                 status = "disabled";
  39         };
  40 };
  41
  42 &mdio0 {
  43         resets = <&rst 22>;
  44         reset-names = "mdio";
  45 };
  46
  47 &eth0 {
  48         compatible = "qca,ar7242-eth", "syscon";
  49
  50         pll-data = <0x16000000 0x00000101 0x00001616>;
  51         pll-reg = <0x4 0x2c 17>;
  52         pll-handle = <&pll>;
  53
  54         resets = <&rst 9>;
  55         reset-names = "mac";
  56 };
  57
  58 &mdio1 {
  59         resets = <&rst 23>;
  60         reset-names = "mdio";
  61         builtin-switch;
  62
  63         builtin_switch: switch0@1f {
  64                 compatible = "qca,ar7240sw";
  65                 #address-cells = <1>;
  66                 #size-cells = <0>;
  67                 reg = <0x1f>;
  68                 resets = <&rst 8>;
  69                 reset-names = "switch";
  70                 qca,mib-poll-interval = <500>;
  71         };
  72 };
  73
  74 &eth1 {
  75         compatible = "qca,ar7242-eth", "syscon";
  76
  77         resets = <&rst 13>;
  78         reset-names = "mac";
  79
  80         phy-mode = "gmii";
  81
  82         fixed-link {
  83                 speed = <1000>;
  84                 full-duplex;
  85         };
  86 };