target/linux/ath79/dts/ar7242_engenius_ecb350-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "ar7242.dtsi"
   4 #include "ar724x_senao_loader.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "engenius,ecb350-v1", "qca,ar7242";
  11         model = "EnGenius ECB350 v1";
  12
  13         aliases {
  14                 label-mac-device = &ath9k;
  15                 led-boot = &led_power;
  16                 led-failsafe = &led_power;
  17                 led-running = &led_power;
  18                 led-upgrade = &led_power;
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys";
  23
  24                 reset {
  25                         label = "reset";
  26                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  27                         debounce-interval = <60>;
  28                         linux,code = <KEY_RESTART>;
  29                 };
  30         };
  31
  32         leds {
  33                 compatible = "gpio-leds";
  34
  35                 led_power: power {
  36                         label = "green:power";
  37                         gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
  38                         default-state = "on";
  39                 };
  40         };
  41
  42         ath9k-leds {
  43                 compatible = "gpio-leds";
  44
  45                 wlan {
  46                         label = "green:wlan";
  47                         gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
  48                         linux,default-trigger = "phy0tpt";
  49                 };
  50         };
  51 };
  52
  53 &mdio0 {
  54         status = "okay";
  55
  56         phy4: ethernet-phy@4 {
  57                 reg = <4>;
  58                 eee-broken-100tx;
  59                 eee-broken-1000t;
  60         };
  61 };
  62
  63 &eth0 {
  64         status = "okay";
  65
  66         mtd-mac-address = <&art 0x0>;
  67
  68         phy-handle = <&phy4>;
  69         phy-mode = "rgmii-id";
  70
  71         pll-data = <0x02000000 0x00000101 0x00001313>;
  72 };
  73
  74 &pcie {
  75         status = "okay";
  76
  77         ath9k: wifi@0,0,0 {
  78                 compatible = "pci168c,002a";
  79                 reg = <0x0 0 0 0 0>;
  80                 mtd-mac-address = <&art 0x0>;
  81                 mtd-mac-address-increment = <(-1)>;
  82                 qca,no-eeprom;
  83                 #gpio-cells = <2>;
  84                 gpio-controller;
  85         };
  86 };