target/linux/ath79/dts/ar9132_tl-wr1043nd-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9132.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
  11         model = "TP-Link TL-WR1043ND Version 1";
  12
  13         aliases {
  14                 led-status = &system;
  15         };
  16
  17         extosc: ref {
  18                 compatible = "fixed-clock";
  19                 #clock-cells = <0>;
  20                 clock-frequency = <40000000>;
  21         };
  22
  23         keys {
  24                 compatible = "gpio-keys";
  25                 #address-cells = <1>;
  26                 #size-cells = <0>;
  27
  28                 button0 {
  29                         label = "reset";
  30                         linux,code = <KEY_RESTART>;
  31                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  32                         debounce-interval = <60>;
  33                 };
  34
  35                 button1 {
  36                         label = "qss";
  37                         linux,code = <KEY_WPS_BUTTON>;
  38                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  39                         debounce-interval = <60>;
  40                 };
  41         };
  42
  43         leds {
  44                 compatible = "gpio-leds";
  45                 usb {
  46                         label = "tp-link:green:usb";
  47                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  48                         default-state = "off";
  49                         trigger-sources = <&hub_port>;
  50                         linux,default-trigger = "usbport";
  51                 };
  52
  53                 system: system {
  54                         label = "tp-link:green:system";
  55                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  56                         linux,default-trigger = "heartbeat";
  57                 };
  58
  59                 qss {
  60                         label = "tp-link:green:qss";
  61                         gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
  62                 };
  63
  64                 wlan {
  65                         label = "tp-link:green:wlan";
  66                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  67                         default-state = "off";
  68                         linux,default-trigger = "phy0tpt";
  69                 };
  70         };
  71
  72         rtl8366rb {
  73                 compatible = "realtek,rtl8366rb";
  74                 gpio-sda = <&gpio 18 GPIO_ACTIVE_HIGH>;
  75                 gpio-sck = <&gpio 19 GPIO_ACTIVE_HIGH>;
  76
  77                 resets = <&rst 8>;
  78                 reset-names = "switch";
  79         };
  80 };
  81
  82 &uart {
  83         status = "okay";
  84 };
  85
  86 &pll {
  87         clocks = <&extosc>;
  88 };
  89
  90 &usb {
  91         status = "okay";
  92
  93         hub_port: port@1 {
  94                 reg = <1>;
  95                 #trigger-source-cells = <0>;
  96         };
  97 };
  98
  99 &usb_phy {
 100         status = "okay";
 101 };
 102
 103 &spi {
 104         status = "okay";
 105         num-cs = <1>;
 106
 107         flash@0 {
 108                 #address-cells = <1>;
 109                 #size-cells = <1>;
 110                 compatible = "jedec,spi-nor";
 111                 reg = <0>;
 112                 spi-max-frequency = <25000000>;
 113
 114                 partitions {
 115                         compatible = "fixed-partitions";
 116                         #address-cells = <1>;
 117                         #size-cells = <1>;
 118
 119                         uboot: partition@0 {
 120                                 label = "u-boot";
 121                                 reg = <0x000000 0x020000>;
 122                                 read-only;
 123                         };
 124
 125                         partition@20000 {
 126                                 label = "firmware";
 127                                 reg = <0x020000 0x7D0000>;
 128                         };
 129
 130                         art: partition@7F0000 {
 131                                 label = "art";
 132                                 reg = <0x7F0000 0x010000>;
 133                                 read-only;
 134                         };
 135                 };
 136         };
 137 };
 138
 139 &eth0 {
 140         status = "okay";
 141
 142         phy-mode = "rgmii";
 143         mtd-mac-address = <&uboot 0x1fc00>;
 144
 145         resets = <&rst 9>;
 146         reset-names = "mac";
 147
 148         fixed-link {
 149                 speed = <1000>;
 150                 full-duplex;
 151         };
 152 };
 153
 154 &wmac {
 155         status = "okay";
 156         mtd-cal-data = <&art 0x1000>;
 157         mtd-mac-address = <&uboot 0x1fc00>;
 158 };