target/linux/ath79/dts/ar9132_tplink_tl-wa901nd-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9132.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wa901nd-v2", "qca,ar9132";
  11         model = "TP-Link TL-WA901ND v2";
  12
  13         aliases {
  14                 led-boot = &system;
  15                 led-failsafe = &system;
  16                 led-running = &system;
  17                 led-upgrade = &system;
  18         };
  19
  20         extosc: ref {
  21                 compatible = "fixed-clock";
  22                 #clock-cells = <0>;
  23                 clock-frequency = <40000000>;
  24         };
  25
  26         keys {
  27                 compatible = "gpio-keys";
  28
  29                 reset {
  30                         label = "reset";
  31                         linux,code = <KEY_RESTART>;
  32                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  33                         debounce-interval = <60>;
  34                 };
  35
  36                 qss {
  37                         label = "qss";
  38                         linux,code = <KEY_WPS_BUTTON>;
  39                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  40                         debounce-interval = <60>;
  41                 };
  42         };
  43
  44         leds {
  45                 compatible = "gpio-leds";
  46
  47                 system: system {
  48                         label = "tp-link:green:system";
  49                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 qss {
  53                         label = "tp-link:green:qss";
  54                         gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
  55                 };
  56
  57                 wlan {
  58                         label = "tp-link:green:wlan";
  59                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  60                         linux,default-trigger = "phy0tpt";
  61                 };
  62         };
  63 };
  64
  65 &uart {
  66         status = "okay";
  67 };
  68
  69 &pll {
  70         clocks = <&extosc>;
  71 };
  72
  73 &spi {
  74         status = "okay";
  75         num-cs = <1>;
  76
  77         flash@0 {
  78                 compatible = "jedec,spi-nor";
  79                 reg = <0>;
  80                 spi-max-frequency = <25000000>;
  81
  82                 partitions {
  83                         compatible = "fixed-partitions";
  84                         #address-cells = <1>;
  85                         #size-cells = <1>;
  86
  87                         uboot: partition@0 {
  88                                 label = "u-boot";
  89                                 reg = <0x000000 0x020000>;
  90                                 read-only;
  91                         };
  92
  93                         partition@1 {
  94                                 compatible = "tplink,firmware";
  95                                 label = "firmware";
  96                                 reg = <0x020000 0x3D0000>;
  97                         };
  98
  99                         art: partition@2 {
 100                                 label = "art";
 101                                 reg = <0x3F0000 0x010000>;
 102                                 read-only;
 103                         };
 104                 };
 105         };
 106 };
 107
 108 &mdio0 {
 109         status = "okay";
 110
 111         phy0: ethernet-phy@c {
 112                 reg = <0xc>;
 113                 phy-mode = "mii";
 114         };
 115 };
 116
 117 &eth0 {
 118         status = "okay";
 119
 120         phy-mode = "mii";
 121         mtd-mac-address = <&uboot 0x1fc00>;
 122
 123         phy-handle = <&phy0>;
 124 };
 125
 126 &wmac {
 127         status = "okay";
 128         mtd-cal-data = <&art 0x1000>;
 129         mtd-mac-address = <&uboot 0x1fc00>;
 130 };