target/linux/ath79/dts/ar9132_tplink_tl-wr1043nd-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9132.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
  11         model = "TP-Link TL-WR1043ND v1";
  12
  13         aliases {
  14                 led-boot = &system;
  15                 led-failsafe = &system;
  16                 led-running = &system;
  17                 led-upgrade = &system;
  18         };
  19
  20         extosc: ref {
  21                 compatible = "fixed-clock";
  22                 #clock-cells = <0>;
  23                 clock-frequency = <40000000>;
  24         };
  25
  26         keys {
  27                 compatible = "gpio-keys";
  28
  29                 button0 {
  30                         label = "reset";
  31                         linux,code = <KEY_RESTART>;
  32                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  33                         debounce-interval = <60>;
  34                 };
  35
  36                 button1 {
  37                         label = "qss";
  38                         linux,code = <KEY_WPS_BUTTON>;
  39                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  40                         debounce-interval = <60>;
  41                 };
  42         };
  43
  44         leds {
  45                 compatible = "gpio-leds";
  46                 usb {
  47                         label = "tp-link:green:usb";
  48                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  49                         trigger-sources = <&hub_port>;
  50                         linux,default-trigger = "usbport";
  51                 };
  52
  53                 system: system {
  54                         label = "tp-link:green:system";
  55                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  56                         linux,default-trigger = "heartbeat";
  57                 };
  58
  59                 qss {
  60                         label = "tp-link:green:qss";
  61                         gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
  62                 };
  63
  64                 wlan {
  65                         label = "tp-link:green:wlan";
  66                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  67                         linux,default-trigger = "phy0tpt";
  68                 };
  69         };
  70
  71         rtl8366rb {
  72                 compatible = "realtek,rtl8366rb";
  73                 gpio-sda = <&gpio 18 GPIO_ACTIVE_HIGH>;
  74                 gpio-sck = <&gpio 19 GPIO_ACTIVE_HIGH>;
  75
  76                 resets = <&rst 8>;
  77                 reset-names = "switch";
  78         };
  79 };
  80
  81 &uart {
  82         status = "okay";
  83 };
  84
  85 &pll {
  86         clocks = <&extosc>;
  87 };
  88
  89 &usb {
  90         #address-cells = <1>;
  91         #size-cells = <0>;
  92         status = "okay";
  93
  94         hub_port: port@1 {
  95                 reg = <1>;
  96                 #trigger-source-cells = <0>;
  97         };
  98 };
  99
 100 &usb_phy {
 101         status = "okay";
 102 };
 103
 104 &spi {
 105         status = "okay";
 106         num-cs = <1>;
 107
 108         flash@0 {
 109                 compatible = "jedec,spi-nor";
 110                 reg = <0>;
 111                 spi-max-frequency = <25000000>;
 112
 113                 partitions {
 114                         compatible = "fixed-partitions";
 115                         #address-cells = <1>;
 116                         #size-cells = <1>;
 117
 118                         uboot: partition@0 {
 119                                 label = "u-boot";
 120                                 reg = <0x000000 0x020000>;
 121                                 read-only;
 122                         };
 123
 124                         partition@20000 {
 125                                 compatible = "tplink,firmware";
 126                                 label = "firmware";
 127                                 reg = <0x020000 0x7D0000>;
 128                         };
 129
 130                         art: partition@7F0000 {
 131                                 label = "art";
 132                                 reg = <0x7F0000 0x010000>;
 133                                 read-only;
 134                         };
 135                 };
 136         };
 137 };
 138
 139 &eth0 {
 140         status = "okay";
 141
 142         phy-mode = "rgmii";
 143         mtd-mac-address = <&uboot 0x1fc00>;
 144
 145         fixed-link {
 146                 speed = <1000>;
 147                 full-duplex;
 148         };
 149 };
 150
 151 &wmac {
 152         status = "okay";
 153         mtd-cal-data = <&art 0x1000>;
 154         mtd-mac-address = <&uboot 0x1fc00>;
 155 };