target/linux/ath79/dts/ar9132_tplink_tl-wr941-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9132.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wr941-v2", "qca,ar9132";
  11         model = "TP-Link TL-WR941N/ND v2/v3";
  12
  13         aliases {
  14                 led-boot = &led_system;
  15                 led-failsafe = &led_system;
  16                 led-running = &led_system;
  17                 led-upgrade = &led_system;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 button0 {
  24                         label = "reset";
  25                         linux,code = <KEY_RESTART>;
  26                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  27                         debounce-interval = <60>;
  28                 };
  29
  30                 button1 {
  31                         label = "qss";
  32                         linux,code = <KEY_WPS_BUTTON>;
  33                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  34                         debounce-interval = <60>;
  35                 };
  36         };
  37
  38         leds {
  39                 compatible = "gpio-leds";
  40
  41                 led_system: system {
  42                         label = "tp-link:green:system";
  43                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 qss_r {
  47                         label = "tp-link:red:qss";
  48                         gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
  49                 };
  50
  51                 qss_g {
  52                         label = "tp-link:green:qss";
  53                         gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
  54                 };
  55
  56                 wlan {
  57                         label = "tp-link:green:wlan";
  58                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  59                         linux,default-trigger = "phy0tpt";
  60                 };
  61         };
  62
  63         dsa {
  64                 compatible = "marvell,dsa";
  65                 #address-cells = <1>;
  66                 #size-cells = <0>;
  67
  68                 dsa,mii-bus = <&mdio0>;
  69                 dsa,ethernet = <&eth0>;
  70
  71                 switch@0 {
  72                         #address-cells = <1>;
  73                         #size-cells = <0>;
  74                         reg = <0>;
  75
  76                         port@0 {
  77                                 reg = <0>;
  78                                 label = "wan";
  79                         };
  80
  81                         port@1 {
  82                                 reg = <1>;
  83                                 label = "lan1";
  84                         };
  85
  86                         port@2 {
  87                                 reg = <2>;
  88                                 label = "lan2";
  89                         };
  90
  91                         port@3 {
  92                                 reg = <3>;
  93                                 label = "lan3";
  94                         };
  95
  96                         port@4 {
  97                                 reg = <4>;
  98                                 label = "lan4";
  99                         };
 100
 101                         port@5 {
 102                                 reg = <5>;
 103                                 label = "cpu";
 104                         };
 105                 };
 106         };
 107 };
 108
 109 &uart {
 110         status = "okay";
 111 };
 112
 113 &spi {
 114         status = "okay";
 115
 116         flash@0 {
 117                 compatible = "jedec,spi-nor";
 118                 reg = <0>;
 119                 spi-max-frequency = <25000000>;
 120
 121                 partitions {
 122                         compatible = "fixed-partitions";
 123                         #address-cells = <1>;
 124                         #size-cells = <1>;
 125
 126                         uboot: partition@0 {
 127                                 label = "u-boot";
 128                                 reg = <0x000000 0x20000>;
 129                                 read-only;
 130                         };
 131
 132                         partition@20000 {
 133                                 compatible = "tplink,firmware";
 134                                 label = "firmware";
 135                                 reg = <0x020000 0x3d0000>;
 136                         };
 137
 138                         art: partition@3f0000 {
 139                                 label = "art";
 140                                 reg = <0x3f0000 0x10000>;
 141                                 read-only;
 142                         };
 143                 };
 144         };
 145 };
 146
 147 &mdio0 {
 148         status = "okay";
 149 };
 150
 151 &eth0 {
 152         status = "okay";
 153
 154         phy-mode = "rmii";
 155         mtd-mac-address = <&uboot 0x1fc00>;
 156
 157         fixed-link {
 158                 speed = <100>;
 159                 full-duplex;
 160         };
 161 };
 162
 163 &wmac {
 164         status = "okay";
 165         mtd-cal-data = <&art 0x1000>;
 166         mtd-mac-address = <&uboot 0x1fc00>;
 167 };