target/linux/ath79/dts/ar9330_glinet_ar150.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9330.dtsi"
   8
   9 / {
  10         model = "GL.iNet GL-AR150";
  11         compatible = "glinet,ar150", "qca,ar9330";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-boot = &wlan;
  16                 led-failsafe = &wlan;
  17                 led-upgrade = &wlan;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 wlan: wlan {
  24                         label = "gl-ar150:orange:wlan";
  25                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  26                         linux,default-trigger = "phy0tpt";
  27                 };
  28
  29                 lan {
  30                         label = "gl-ar150:green:lan";
  31                         gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
  32                 };
  33
  34                 wan {
  35                         label = "gl-ar150:green:wan";
  36                         gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  37                 };
  38         };
  39
  40         keys {
  41                 compatible = "gpio-keys-polled";
  42                 poll-interval = <100>;
  43
  44                 manual {
  45                         label = "manual";
  46                         linux,code = <BTN_7>;
  47                         gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
  48                 };
  49
  50                 auto {
  51                         label = "auto";
  52                         linux,code = <BTN_8>;
  53                         gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
  54                 };
  55
  56                 reset {
  57                         label = "reset";
  58                         linux,code = <KEY_RESTART>;
  59                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  60                 };
  61         };
  62 };
  63
  64 &uart {
  65         status = "okay";
  66 };
  67
  68 &gpio {
  69         status = "okay";
  70 };
  71
  72 &usb {
  73         dr_mode = "host";
  74         status = "okay";
  75 };
  76
  77 &usb_phy {
  78         status = "okay";
  79         gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
  80 };
  81
  82 &spi {
  83         num-chipselects = <1>;
  84         status = "okay";
  85
  86         flash@0 {
  87                 compatible = "jedec,spi-nor";
  88                 spi-max-frequency = <104000000>;
  89                 reg = <0>;
  90
  91                 partitions {
  92                         compatible = "fixed-partitions";
  93                         #address-cells = <1>;
  94                         #size-cells = <1>;
  95
  96                         partition@0 {
  97                                 label = "u-boot";
  98                                 reg = <0x000000 0x040000>;
  99                                 read-only;
 100                         };
 101
 102                         partition@1 {
 103                                 label = "u-boot-env";
 104                                 reg = <0x040000 0x010000>;
 105                         };
 106
 107                         partition@2 {
 108                                 compatible = "denx,uimage";
 109                                 label = "firmware";
 110                                 reg = <0x050000 0xfa0000>;
 111                         };
 112
 113                         art: partition@3 {
 114                                 label = "ART";
 115                                 reg = <0xff0000 0x010000>;
 116                                 read-only;
 117                         };
 118                 };
 119         };
 120 };
 121
 122 &eth0 {
 123         status = "okay";
 124
 125         mtd-mac-address = <&art 0x0>;
 126 };
 127
 128 &eth1 {
 129         status = "okay";
 130
 131         mtd-mac-address = <&art 0x0>;
 132
 133         gmac-config {
 134                 device = <&gmac>;
 135
 136                 switch-phy-addr-swap = <0>;
 137                 switch-phy-swap = <0>;
 138         };
 139 };
 140
 141 &wmac {
 142         status = "okay";
 143         mtd-cal-data = <&art 0x1000>;
 144         mtd-mac-address = <&art 0x0>;
 145 };