target/linux/ath79/dts/ar9344_comfast_cf-e120a-v3.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         compatible = "comfast,cf-e120a-v3", "qca,ar9344";
  11         model = "COMFAST CF-E120A v3";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-boot = &led_rssihigh;
  16                 led-failsafe = &led_rssihigh;
  17                 led-upgrade = &led_rssihigh;
  18                 label-mac-device = &eth0;
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 pinctrl-names = "default";
  25                 pinctrl-0 = <&led_rssimediumhigh_pin>;
  26
  27                 wan {
  28                         label = "cf-e120a-v3:green:wan";
  29                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 lan {
  33                         label = "cf-e120a-v3:green:lan";
  34                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 wlan {
  38                         label = "cf-e120a-v3:green:wlan";
  39                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  40                         linux,default-trigger = "phy0tpt";
  41                 };
  42
  43                 rssilow {
  44                         label = "cf-e120a-v3:red:rssilow";
  45                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 rssimediumlow {
  49                         label = "cf-e120a-v3:red:rssimediumlow";
  50                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 rssimediumhigh {
  54                         label = "cf-e120a-v3:green:rssimediumhigh";
  55                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 led_rssihigh: rssihigh {
  59                         label = "cf-e120a-v3:green:rssihigh";
  60                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  61                 };
  62         };
  63
  64         keys {
  65                 compatible = "gpio-keys";
  66
  67                 reset {
  68                         label = "reset";
  69                         linux,code = <KEY_RESTART>;
  70                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  71                         debounce-interval = <60>;
  72                 };
  73         };
  74 };
  75
  76 &pinmux {
  77         led_rssimediumhigh_pin: pinmux_rssimediumhigh_pin {
  78                 pinctrl-single,bits = <0x10 0x0 0xff>;
  79         };
  80 };
  81
  82 &spi {
  83         status = "okay";
  84
  85         num-cs = <1>;
  86
  87         flash@0 {
  88                 compatible = "jedec,spi-nor";
  89                 reg = <0>;
  90                 spi-max-frequency = <25000000>;
  91
  92                 partitions {
  93                         compatible = "fixed-partitions";
  94                         #address-cells = <1>;
  95                         #size-cells = <1>;
  96
  97                         partition@0 {
  98                                 label = "u-boot";
  99                                 reg = <0x000000 0x010000>;
 100                                 read-only;
 101                         };
 102
 103                         art: partition@10000 {
 104                                 label = "art";
 105                                 reg = <0x010000 0x010000>;
 106                                 read-only;
 107                         };
 108
 109                         partition@20000 {
 110                                 compatible = "denx,uimage";
 111                                 label = "firmware";
 112                                 reg = <0x020000 0x7d0000>;
 113                         };
 114
 115                         partition@7f0000 {
 116                                 label = "nvram";
 117                                 reg = <0x7f0000 0x010000>;
 118                                 read-only;
 119                         };
 120                 };
 121         };
 122 };
 123
 124 &uart {
 125         status = "okay";
 126 };
 127
 128 &eth0 {
 129         status = "okay";
 130         phy-handle = <&swphy0>;
 131         mtd-mac-address = <&art 0x0>;
 132
 133         gmac-config {
 134                 device = <&gmac>;
 135                 switch-phy-swap = <1>;
 136         };
 137 };
 138
 139 &eth1 {
 140         status = "okay";
 141         mtd-mac-address = <&art 0x6>;
 142 };
 143
 144 &wmac {
 145         status = "okay";
 146         mtd-cal-data = <&art 0x1000>;
 147 };