target/linux/ath79/dts/ar9344_ocedo_raccoon.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         model = "OCEDO Raccoon";
  11         compatible = "ocedo,raccoon", "qca,ar9344";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &system;
  19                 led-failsafe = &system;
  20                 led-running = &system;
  21                 led-upgrade = &system;
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 power {
  28                         label = "raccoon:green:power";
  29                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  30                         default-state = "on";
  31                 };
  32
  33                 wlan2g {
  34                         label = "raccoon:yellow:wlan24";
  35                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  36                         default-state = "off";
  37                         linux,default-trigger = "phy0tpt";
  38                 };
  39
  40                 system: system {
  41                         label = "raccoon:blue:sys";
  42                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  43                 };
  44         };
  45
  46         ath9k-leds {
  47                 compatible = "gpio-leds";
  48
  49                 wlan5g {
  50                         label = "raccoon:red:wlan5";
  51                         gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
  52                         default-state = "off";
  53                         linux,default-trigger = "phy1tpt";
  54                 };
  55         };
  56
  57         keys {
  58                 compatible = "gpio-keys-polled";
  59                 poll-interval = <20>;
  60
  61                 reset {
  62                         linux,code = <KEY_RESTART>;
  63                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  64                         debounce-interval = <60>;
  65                 };
  66         };
  67 };
  68
  69 &ref {
  70         clock-frequency = <40000000>;
  71 };
  72
  73 &uart {
  74         status = "okay";
  75 };
  76
  77 &gpio {
  78         status = "okay";
  79 };
  80
  81 &spi {
  82         num-cs = <1>;
  83
  84         status = "okay";
  85
  86         flash@0 {
  87                 compatible = "jedec,spi-nor";
  88                 reg = <0>;
  89                 spi-max-frequency = <25000000>;
  90
  91                 partitions {
  92                         compatible = "fixed-partitions";
  93                         #address-cells = <1>;
  94                         #size-cells = <1>;
  95
  96                         uboot: partition@0 {
  97                                 label = "u-boot";
  98                                 reg = <0x000000 0x040000>;
  99                                 read-only;
 100                         };
 101
 102                         partition@40000 {
 103                                 label = "u-boot-env";
 104                                 reg = <0x040000 0x010000>;
 105                         };
 106
 107                         partition@50000 {
 108                                 label = "firmware";
 109                                 reg = <0x050000 0x740000>;
 110                         };
 111
 112                         partition@790000 {
 113                                 label = "vendor";
 114                                 reg = <0x790000 0x740000>;
 115                                 read-only;
 116                         };
 117
 118                         partition@ed0000 {
 119                                 label = "data";
 120                                 reg = <0xed0000 0x110000>;
 121                                 read-only;
 122                         };
 123
 124                         partition@fe0000 {
 125                                 label = "id";
 126                                 reg = <0xfe0000 0x010000>;
 127                                 read-only;
 128                         };
 129
 130                         art: partition@ff0000 {
 131                                 label = "art";
 132                                 reg = <0xff0000 0x010000>;
 133                                 read-only;
 134                         };
 135                 };
 136         };
 137 };
 138
 139 &pcie {
 140         status = "okay";
 141
 142         ath9k: wifi@0,0 {
 143                 compatible = "pci168c,0030";
 144                 reg = <0x0000 0 0 0 0>;
 145                 mtd-mac-address = <&art 0xc>;
 146                 qca,no-eeprom;
 147                 #gpio-cells = <2>;
 148                 gpio-controller;
 149         };
 150 };
 151
 152 &wmac {
 153         status = "okay";
 154
 155         mtd-cal-data = <&art 0x1000>;
 156         mtd-mac-address = <&art 0x6>;
 157 };
 158
 159 &mdio0 {
 160         status = "okay";
 161
 162         phy-mask = <0>;
 163
 164         phy0: ethernet-phy@0 {
 165                 reg = <0>;
 166                 phy-mode = "rgmii";
 167         };
 168 };
 169
 170 &eth0 {
 171         status = "okay";
 172
 173         /* default for ar934x, except for 1000M */
 174         pll-data = <0x06000000 0x00000101 0x00001616>;
 175
 176         mtd-mac-address = <&art 0x0>;
 177
 178         phy-mode = "rgmii";
 179         phy-handle = <&phy0>;
 180 };