target/linux/ath79/dts/ar9344_pcs_cr5000.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         model = "PowerCloud Systems CR5000";
  11         compatible = "pcs,cr5000", "qca,ar9344";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-boot = &status;
  16                 led-failsafe = &status;
  17                 led-running = &status;
  18                 led-upgrade = &status;
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys-polled";
  23                 poll-interval = <20>;
  24
  25                 pinctrl-names = "default";
  26                 pinctrl-0 = <&jtag_disable_pins>;
  27
  28                 reset {
  29                         label = "Reset button";
  30                         linux,code = <KEY_RESTART>;
  31                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  32                         debounce-interval = <60>;
  33                 };
  34
  35                 wps {
  36                         label = "WPS button";
  37                         linux,code = <KEY_WPS_BUTTON>;
  38                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  39                         debounce-interval = <60>;
  40                 };
  41         };
  42
  43         leds {
  44                 compatible = "gpio-leds";
  45
  46                 status: power {
  47                         label = "pcs:amber:power";
  48                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>,
  49                                 <&gpio 4 GPIO_ACTIVE_LOW>;
  50                         default-state = "on";
  51                 };
  52
  53                 wlan2g {
  54                         label = "pcs:blue:wlan";
  55                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  56                         default-state = "off";
  57                         linux,default-trigger = "phy0tpt";
  58                 };
  59
  60                 wps_white {
  61                         label = "pcs:white:wps";
  62                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  63                         default-state = "off";
  64                 };
  65         };
  66 };
  67
  68 &ref {
  69         clock-frequency = <25000000>;
  70 };
  71
  72 &uart {
  73         status = "okay";
  74 };
  75
  76 &gpio {
  77         status = "okay";
  78 };
  79
  80 &spi {
  81         num-cs = <1>;
  82
  83         status = "okay";
  84
  85         flash@0 {
  86                 compatible = "jedec,spi-nor";
  87                 reg = <0>;
  88                 spi-max-frequency = <25000000>;
  89
  90                 partitions {
  91                         compatible = "fixed-partitions";
  92                         #address-cells = <1>;
  93                         #size-cells = <1>;
  94
  95                         uboot: partition@0 {
  96                                 label = "u-boot";
  97                                 reg = <0x000000 0x040000>;
  98                                 read-only;
  99                         };
 100
 101                         partition@40000 {
 102                                 label = "u-boot-env";
 103                                 reg = <0x040000 0x010000>;
 104                                 read-only;
 105                         };
 106
 107                         partition@50000 {
 108                                 label = "firmware";
 109                                 reg = <0x050000 0x07a0000>;
 110                         };
 111
 112                         art: partition@7f0000 {
 113                                 label = "art";
 114                                 reg = <0x7f0000 0x010000>;
 115                                 read-only;
 116                         };
 117                 };
 118         };
 119 };
 120
 121 &usb {
 122         status = "okay";
 123         #address-cells = <1>;
 124         #size-cells = <0>;
 125
 126         hub_port1: port@1 {
 127                 reg = <1>;
 128                 #trigger-source-cells = <0>;
 129         };
 130 };
 131
 132 &usb_phy {
 133         status = "okay";
 134 };
 135
 136 &pcie {
 137         status = "okay";
 138
 139         ath9k: wifi@0,0 {
 140                 compatible = "pci168c,0030";
 141                 reg = <0x0000 0 0 0 0>;
 142                 mtd-mac-address = <&art 0x5002>;
 143                 #gpio-cells = <2>;
 144                 gpio-controller;
 145         };
 146 };
 147
 148 &mdio0 {
 149         status = "okay";
 150
 151         phy-mask = <0>;
 152
 153         phy0: ethernet-phy@0 {
 154                 reg = <0>;
 155                 phy-mode = "rgmii";
 156                 qca,ar8327-initvals = <
 157                         0x04 0x07600000 /* PORT0 PAD MODE CTRL */
 158                         0x10 0x81000080 /* POWER_ON_STRAP */
 159                         0x50 0xcc35cc35 /* LED_CTRL0 */
 160                         0x54 0xca35ca35 /* LED_CTRL1 */
 161                         0x58 0xc935c935 /* LED_CTRL2 */
 162                         0x5c 0x03ffff00 /* LED_CTRL3 */
 163                         0x7c 0x0000007e /* PORT0_STATUS */
 164                 >;
 165         };
 166 };
 167
 168 &eth0 {
 169         #address-cells = <1>;
 170         #size-cells = <0>;
 171         status = "okay";
 172
 173         /* default for ar934x, except for 1000M */
 174         pll-data = <0x06000000 0x00000101 0x00001616>;
 175
 176         mtd-mac-address = <&art 0x0>;
 177
 178         phy-mode = "rgmii";
 179         phy-handle = <&phy0>;
 180
 181
 182         aliases {
 183                 ag0 = &eth1;
 184         };
 185
 186         port@0 {
 187                 compatible = "swconfig,port";
 188                 reg = <0>;
 189                 swconfig,segment = "lan";
 190                 swconfig,portmap = <1 1>;
 191         };
 192
 193         port@1 {
 194                 compatible = "swconfig,port";
 195                 reg = <1>;
 196                 swconfig,segment = "lan";
 197                 swconfig,portmap = <2 2>;
 198         };
 199
 200         port@2 {
 201                 compatible = "swconfig,port";
 202                 reg = <2>;
 203                 swconfig,segment = "lan";
 204                 swconfig,portmap = <3 3>;
 205         };
 206
 207         port@3 {
 208                 compatible = "swconfig,port";
 209                 reg = <3>;
 210                 swconfig,segment = "lan";
 211                 swconfig,portmap = <4 4>;
 212         };
 213
 214         port@4 {
 215                 compatible = "swconfig,port";
 216                 reg = <4>;
 217                 swconfig,segment = "wan";
 218                 swconfig,portmap = <5 5>;
 219         };
 220 };
 221
 222 &wmac {
 223         status = "okay";
 224
 225         mtd-cal-data = <&art 0x1000>;
 226         mtd-mac-address = <&art 0x1002>;
 227 };