target/linux/ath79/dts/ar9344_tplink_tl-wdr3500-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "ar9344_tplink_tl-wdrxxxx.dtsi"
   5
   6 / {
   7         model = "TP-Link TL-WDR3500 v1";
   8         compatible = "tplink,tl-wdr3500-v1", "qca,ar9344";
   9
  10         aliases {
  11                 label-mac-device = &wmac;
  12         };
  13 };
  14
  15 &leds {
  16         usb {
  17                 label = "tp-link:green:usb";
  18                 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  19                 linux,default-trigger = "usbport";
  20                 trigger-sources = <&hub_port>;
  21         };
  22 };
  23
  24 &gpio {
  25         usb_power {
  26                 gpio-hog;
  27                 gpios = <12 GPIO_ACTIVE_HIGH>;
  28                 output-high;
  29                 line-name = "tp-link:power:usb";
  30         };
  31 };
  32
  33 &pinmux {
  34         pmx_led_wan_lan: pinmux_led_wan_lan {
  35                 pinctrl-single,bits = <0x10 0x2c2d0000 0xffff0000>,
  36                         <0x14 0x292a2b 0xffffff>;
  37         };
  38 };
  39
  40 &builtin_switch {
  41         pinctrl-names = "default";
  42         pinctrl-0 = <&pmx_led_wan_lan>;
  43 };
  44
  45 &usb {
  46         #address-cells = <1>;
  47         #size-cells = <0>;
  48         status = "okay";
  49
  50         hub_port: port@1 {
  51                 reg = <1>;
  52                 #trigger-source-cells = <0>;
  53         };
  54 };
  55
  56 &usb_phy {
  57         status = "okay";
  58 };
  59
  60 &ath9k {
  61         mtd-mac-address = <&uboot 0x1fc00>;
  62         mtd-mac-address-increment = <1>;
  63 };
  64
  65 &wmac {
  66         mtd-mac-address = <&uboot 0x1fc00>;
  67 };
  68
  69 &eth1 {
  70         status = "okay";
  71
  72         mtd-mac-address = <&uboot 0x1fc00>;
  73         mtd-mac-address-increment = <(-1)>;
  74
  75         gmac-config {
  76                 device = <&gmac>;
  77                 switch-phy-swap = <0>;
  78                 switch-only-mode = <1>;
  79         };
  80 };
  81
  82 &eth0 {
  83         status = "okay";
  84
  85         phy-handle = <&swphy4>;
  86
  87         mtd-mac-address = <&uboot 0x1fc00>;
  88         mtd-mac-address-increment = <2>;
  89 };