target/linux/ath79/dts/ar9344_winchannel_wb2000.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         model = "Winchannel WB2000";
  11         compatible = "winchannel,wb2000", "qca,ar9344";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &led_system;
  19                 led-failsafe = &led_system;
  20                 led-running = &led_system;
  21                 led-upgrade = &led_system;
  22         };
  23
  24         i2c {
  25                 compatible = "i2c-gpio";
  26                 gpios = <&gpio 17 GPIO_ACTIVE_HIGH
  27                          &gpio 16 GPIO_ACTIVE_HIGH
  28                         >;
  29                 #address-cells = <1>;
  30                 #size-cells = <0>;
  31
  32                 rtc@68 {
  33                         compatible = "dallas,ds1339";
  34                         reg = <0x68>;
  35                 };
  36         };
  37
  38         leds {
  39                 compatible = "gpio-leds";
  40
  41                 wlan2g {
  42                         label = "wb2000:green:2g";
  43                         gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
  44                         default-state = "off";
  45                         linux,default-trigger = "phy0tpt";
  46                 };
  47
  48                 usb {
  49                         label = "wb2000:green:usb";
  50                         gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
  51                         default-state = "off";
  52                         trigger-sources = <&hub_port1>, <&hub_port2>;
  53                         linux,default-trigger = "usbport";
  54                 };
  55
  56                 led_system: system {
  57                         label = "wb2000:green:system";
  58                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  59                         default-state = "on";
  60                 };
  61         };
  62
  63         keys {
  64                 compatible = "gpio-keys-polled";
  65                 poll-interval = <50>;
  66
  67                 reset {
  68                         linux,code = <KEY_RESTART>;
  69                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  70                         debounce-interval = <60>;
  71                 };
  72         };
  73
  74         ath9k-leds {
  75                 compatible = "gpio-leds";
  76
  77                 wlan {
  78                         label = "wb2000:green:5g";
  79                         gpios = <&ath9k 6 GPIO_ACTIVE_LOW>;
  80                         default-state = "off";
  81                         linux,default-trigger = "phy1tpt";
  82                 };
  83         };
  84 };
  85
  86 &ref {
  87         clock-frequency = <40000000>;
  88 };
  89
  90 &uart {
  91         status = "okay";
  92 };
  93
  94 &spi {
  95         num-cs = <1>;
  96
  97         status = "okay";
  98
  99         flash@0 {
 100                 compatible = "jedec,spi-nor";
 101                 reg = <0>;
 102                 spi-max-frequency = <25000000>;
 103
 104                 partitions {
 105                         compatible = "fixed-partitions";
 106                         #address-cells = <1>;
 107                         #size-cells = <1>;
 108
 109                         partition@0 {
 110                                 label = "u-boot";
 111                                 reg = <0x0 0x40000>;
 112                                 read-only;
 113                         };
 114
 115                         partition@40000 {
 116                                 label = "u-boot-env";
 117                                 reg = <0x40000 0x10000>;
 118                                 read-only;
 119                         };
 120
 121                         partition@50000 {
 122                                 label = "firmware";
 123                                 reg = <0x50000 0xf80000>;
 124                                 compatible = "denx,uimage";
 125                         };
 126
 127                         partition@fd0000 {
 128                                 label = "nvram";
 129                                 reg = <0xfd0000 0x10000>;
 130                                 read-only;
 131                         };
 132
 133                         art: partition@fe0000 {
 134                                 label = "art";
 135                                 reg = <0xfe0000 0x10000>;
 136                                 read-only;
 137                         };
 138
 139                         addr: partition@ff0000 {
 140                                 label = "addr";
 141                                 reg = <0xff0000 0x10000>;
 142                                 read-only;
 143                         };
 144                 };
 145         };
 146 };
 147
 148 &pcie {
 149         status = "okay";
 150
 151         ath9k: wifi@0,0 {
 152                 compatible = "pci168c,0030";
 153                 reg = <0x0000 0 0 0 0>;
 154                 qca,no-eeprom;
 155                 mtd-mac-address = <&addr 0x0>;
 156                 mtd-mac-address-increment = <0x10>;
 157                 #gpio-cells = <2>;
 158                 gpio-controller;
 159         };
 160 };
 161
 162 &usb {
 163         #address-cells = <1>;
 164         #size-cells = <0>;
 165         status = "okay";
 166
 167         port@1 {
 168                 #address-cells = <1>;
 169                 #size-cells = <0>;
 170                 reg = <1>;
 171                 #trigger-source-cells = <0>;
 172
 173                 hub_port1: port@1 {
 174                         reg = <1>;
 175                         #trigger-source-cells = <0>;
 176                 };
 177
 178                 hub_port2: port@2 {
 179                         reg = <2>;
 180                         #trigger-source-cells = <0>;
 181                 };
 182         };
 183 };
 184
 185 &usb_phy {
 186         status = "okay";
 187 };
 188
 189 &wmac {
 190         status = "okay";
 191
 192         mtd-cal-data = <&art 0x1000>;
 193         mtd-mac-address = <&addr 0x0>;
 194 };
 195
 196 &mdio0 {
 197         status = "okay";
 198
 199         phy-mask = <0x10>;
 200
 201         phy4: ethernet-phy@4 {
 202                 reg = <4>;
 203         };
 204 };
 205
 206 &eth0 {
 207         status = "okay";
 208
 209         pll-data = <0xe000000 0x04000101 0x04001313>;
 210
 211         mtd-mac-address = <&addr 0x0>;
 212         mtd-mac-address-increment = <0x21>;
 213
 214         phy-mode = "rgmii-rxid";
 215         phy-handle = <&phy4>;
 216
 217         gmac-config {
 218                 device = <&gmac>;
 219                 rgmii-gmac0 = <1>;
 220                 rxd-delay = <1>;
 221                 rxdv-delay = <1>;
 222         };
 223 };