1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
10 compatible = "zbtlink,zbt-wd323", "qca,ar9344";
13 compatible = "gpio-keys";
17 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
18 linux,code = <KEY_RESTART>;
23 compatible = "i2c-gpio";
27 pinctrl-names = "default";
28 pinctrl-0 = <&enable_gpio15 &enable_gpio19>;
30 sda-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
31 scl-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
34 compatible = "nxp,pcf8563";
41 compatible = "gpio-leds";
43 pinctrl-names = "default";
44 pinctrl-0 = <&enable_gpio20_gpio22>;
48 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
49 linux,default-trigger = "phy0tpt";
53 label = "orange:lan1";
54 gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
58 label = "orange:lan2";
59 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
67 pinctrl-names = "default";
68 pinctrl-0 = <&enable_gpio21>;
72 pinctrl-names = "default";
73 pinctrl-0 = <&jtag_disable_pins>;
86 phy-handle = <&swphy4>;
87 mtd-mac-address = <&art 0x0>;
92 mtd-mac-address = <&art 0x6>;
99 compatible = "jedec,spi-nor";
100 spi-max-frequency = <22000000>;
104 compatible = "fixed-partitions";
105 #address-cells = <1>;
114 reg = <0x40000 0x10000>;
119 compatible = "denx,uimage";
120 reg = <0x50000 0xfa0000>;
124 reg = <0xff0000 0x10000>;
133 mtd-cal-data = <&art 0x1000>;
137 enable_gpio15: pinmux_enable_gpio15 {
138 pinctrl-single,bits = <0xc 0x0 0xff000000>;
141 enable_gpio19: pinmux_enable_gpio19 {
142 pinctrl-single,bits = <0x10 0x0 0xff000000>;
145 enable_gpio20_gpio22: pinmux_enable_gpio20_gpio22 {
146 pinctrl-single,bits = <0x14 0x0 0xff00ff>;
149 enable_gpio21: pinmux_enable_gpio21 {
150 pinctrl-single,bits = <0x14 0x0 0xff00>;